최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지리정보학회지 = Journal of the Korean Association of Geographic Information Studies, v.20 no.1, 2017년, pp.137 - 151
전가영 (충북대학교 도시공학과) , 하성룡 (충북대학교 도시공학과)
The space between urban buildings becomes a waterway during rain events and requires a boundary condition in numerical calculations on grids to separate overland storm flows from building areas. Minimization of the building data distortion as a boundary condition is a necessary step for generating a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
본 연구에서 빗물 유출경로 추출 시 지표 고도정보로 어떤 자료를 사용하였는가? | 빗물 유출경로는 ArcGIS의 하천망의 추출 절차에 따라 유출의 흐름방향(flow direction)기능과 누적격자수(flow accumulation)기능을 이용 하여 추출한다. 이때 격자기반 일반화된 DSM자료를 우수 유출경로 추출을 위한 지표 고도정보로 사용한다. 이상적으론 추출된 유출경로(하천 망)는 상류에서부터 대상지의 최하지점의 격자 까지 단절되는 격자가 없이 연결 되어야 한다. | |
본 연구에서 건물 일반화의 임계값은 무엇을 의미하는가? | 대상지 건물자료는 벡터형식의 DBM(Digital Building Model)자료를 사용했다. 건물 일반화의 임계값은 해당 건물정보의 최대허용 크기를 의미한다. 소거는 제거 대상이 되는 건물의 최소면적, 그리고 단순화는 최소면적 및 건물 외곽선의 요철의 한계, 그리고 통합은 건물간의 최소거리를 제약한다. | |
건물 일반화 임계값은 어떤 변화를 유발하는가? | 소거는 제거 대상이 되는 건물의 최소면적, 그리고 단순화는 최소면적 및 건물 외곽선의 요철의 한계, 그리고 통합은 건물간의 최소거리를 제약한다. 건물 일반화 임계값은 건물형태, 건물간격, 도로 폭과 형상 및 면적 등 속성의 변화를 유발한다. 따라서 건물 일반화 임계값은 대상지면적, 건물의 형태 등을 고려하여 적정한 규모로 적용되어야 한다. |
ArcGIS, 1996. Automation of map generalization. ESRI White Paper Series.
Cho, W.H., K.Y. Han, and Y.J. Kim. 2010. An evaluation of building effect in 2-dimensional inundation analysis using GIS. Journal of the Korean Association of Geographic Information Studies 13(2):119-132 (조완희, 한건연, 김영주. 2010. GIS 를 활용한 2차원 침수해석에서의 건물영향분석. 한국지리정보학회지 13(2):119-132).
Droppova, V. 2011. The tools of automated generalization and building generalization in an ArcGIS environment. Slovak Journal of Civil Engineering 19(1):1-7.
Horvitt, M.S. and P.D. Bates. 2011. Effects of spatial resolution on a raster based model of flood flow. Journal of Hydrology 253:239-249.
Jin, G.H. 2015. Development of building generalization method for two-dimensional urban inundation modelling. Ph.D. Thesis, Chungbuk National University, Chungbuk, Korea. p.130 (진기호. 2015. 2차 원 도시침수 해석을 위한 건물 일반화 기법 개발. 충북대학교 대학원 박사학위논문. 130쪽).
Lee, C.H. and K.Y. Han. 2007. GIS-based urban flood inundation analysis model considering building effect. Journal of Korea Water Resources Association 40 (3):233-236 (이창희, 한건연. 2007. 건물의 영향을 고려한 GIS 기반 도시침수해석 모형. 한국수자원학회지 40(3):223-236).
Li, Z., H. Yan, T. Ai, and J. Chen. 2004. Automated building generalization based on morphology and gestalt theory. International Journal Geographic Information Science 19(5):513-534.
Park, I.H., G.H. Jin., K.Y. Jeon, and S.R. Ha. 2015. Application of hydro-cartographic generalization on buildings for 2-dimensional inundation analysis. Journal of the Korean Association of Geographic Information Studies 18(2):1-15 (박인혁, 진기호, 전가영, 하성룡. 2015. 2차원 침수해석을 위한 수리학적 건물 일반화 기법의 적용. 한국지리정보학회지 18(2):1-15).
Schubert, J.E. and B.F. Sanders. 2012. Building treatments for urban flood inundation models and implication for predictive skill and modeling efficiency. Advances in Water Resources 41:49-64.
Seoul Metropolitan Government. 2012. General planning of the functional improvement of shinworl-pumping system for storm water drainage and storage. pp.61-62 (서울특별시. 2012. 신월 빗물저류배수시설 등 재시설 확충 기본계획보고서. 61-62쪽).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.