최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국융합학회논문지 = Journal of the Korea Convergence Society, v.8 no.5, 2017년, pp.155 - 160
박장우 (아주네트웍스(주) 서비스본부)
A cabin of the agricultural tractor is designed to protect the driver from vibration transmitted due to the irregular ground and overturning of the tractor. The cabin is usually manufactured by welding frames and plates. Consequently, the welded state of the frame and plate affects the stiffness of ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
트랙터는 무엇인가? | 트랙터는 각종 작물을 생산하는 농용작업 외에 건설작업, 임야작업, 가정용 등에 사용되는 다목적 작업차량으로 경작용의 가래, 쟁기, 써레, 수확기 등을 견인하는 농업 작업에 없어서는 안 되는 필수 장비이다. 트랙터 운전자의 작업공간인 캐빈은 트랙터가 전도되었을 때 운전자가 입게 될 피해를 최소화하고 운전자가 전락하여 상해를 입지 않도록 보호하여야 한다. | |
본 논문에서 캐빈 구조의 해석을 위해 사용한 프로그램은 무엇인가? | 1] 과 같다. 캐빈 구조의 해석은 상용프로그램인 ABAQUS를 이용하였다. 재료의 물성치는 [Table 1] 과 같고 해석 모델은 쉘 요소를 사용하였으며 4개의 node를 가지는 S4 요소는 82,990개이고 3개의 node를 가지는 S3 요소는 34개를 사용하였다. | |
캐빈 구조의 해석을 위한 해석 모델은 무엇을 사용하였는가? | 캐빈 구조의 해석은 상용프로그램인 ABAQUS를 이용하였다. 재료의 물성치는 [Table 1] 과 같고 해석 모델은 쉘 요소를 사용하였으며 4개의 node를 가지는 S4 요소는 82,990개이고 3개의 node를 가지는 S3 요소는 34개를 사용하였다. |
S. H. Kim, "Research on the Booming Noise Reduction of the Cabin of the Tractor using Hybrid Method," KSME Spring Conference, pp. 601-605, 2011.
C. Chen, "Dynamic Modeling of Tractor-Semitrailer Vehicles in Automated Highway Systems," Proc. American Control Conference, Seattle, USA, 1995.
J. S. Cho, "Determination of Dynamic Parameters of Agricultural Tractor Cab-Suspension By Modal Analysis," Trans. of the Korean Society of Automotive Engineers, Vol. 7, No. 8, pp. 216-223, 1999.
W. S. Choe, "Simulation of Static Tests on Agricultural Tractor Cab," Korean Society for Agricultural Machinery Spring Conference, pp.3-9, 2001.
C. W. Ha, "Finite Element Analysis of an Agricultural Tractor Cabin based on the OECD Standard(code 4)", J. of the Korean Society for Agricultural Machinery, Vol. 28, No. 4, pp. 305-314, 2003.
W. Deng, "Parametric Study on Vehicle-Trailer Dynamics for Stability Control," SAE Trans. J. of Passenger Cars, pp. 1411-1419, 2003.
J. M. Choung, "Study on the Static and Dynamic Structural Analysis Procedure of Excavators," KSME Spring Conference, pp. 537-543, 2003.
G. S. Kim, "Measurement of Static and Dynamic Stress and Motion Characteristics of Excavators," KSME Spring Conference, pp. 473-478, 2003.
S. H. Kim, "Evaluation of Design Fitness for the E-Tractor by using CAE Analysis," KSME Spring Conference, pp. 27-32, 2012.
J. K. Yu, "Tractor Resonance Analysis and Validation," KSME Fall Conference, pp.1972-1976, 2013.
P. Velmurugan, "Ride Comfort Analysis of Unsuspended Cabin Tractor Semi-Trailer," Int. J. Vehicle Structures & Systems, Vol. 6, No. 4, pp. 101-109, 2014.
J. B. Ma, "Mechanical Characteristics Analysis of Structural Light-weight Aluminum Foam", Journal of the Korea Convergence Society, Vol. 2, No. 3, pp. 1-6, 2011.
Y. J. Jang, "Simplified Load Calculation and Structural Test for Scale Down Model of Small Wind Turbine Blade according to IEC 61400-2", Journal of the Korea Convergence Society, Vol. 4, No. 3, pp. 1-5, 2013.
D. H. Yoo, "A Case Study on Inside Noise Reduction of Agricultural Tractor Cab(I)", J. of the Korean Society for Agricultural Machinery, Vol. 20, No. 2, pp. 117-126, 1995.
D. H. Yoo, "A Case Study on Inside Noise Reduction of Agricultural Tractor Cab(II)", J. of the Korean Society for Agricultural Machinery, Vol. 20, No. 2, pp. 127-132, 1995.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.