최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.25 no.5, 2017년, pp.548 - 554
김진수 (한국과학기술원 조천식녹색교통대학원) , 노홍승 (한국교통연구원 물류연구본부) , 민연주 (한국교통연구원 물류연구본부) , 허성호 (한국교통연구원 물류연구본부) , 신승진 (한국교통연구원 물류연구본부) , 장인권 (한국과학기술원 조천식녹색교통대학원)
There is a growing demand for commercial vehicles with a lightweight design due to fuel costs and environmental regulations. In this study, a bulk trailer is selected with the axle, suspension arm, and 5th wheel removed for simplification. Three extreme driving conditions when fully loaded are consi...
H. Kwon and S. Seo, Korean National Logistics Costs in 2011 and 2012, The Korea Transport Institute, pp.1-126, 2014.
H. Roh, I. Jeong, Y. Min, S. Hur, S. Shin, B. Yu and S. Jang, "Enhancement of Road Freight Vehicle Fuel Efficiency Using Lightweight Flat-Bed Trailers Made of High-Strength Steel Plates," Journal of Transport Research, Vol.22, No.2, pp.65-82, 2015.
J. G. Kim and M. S. Yoon, "Optimal Design of Lightweight Frame for Heavy Flat-Bed Trailer by Using Taguchi Method," Transactions of the KSME(A), Vol.34, No.3, pp.353-359, 2010.
G. W. Jang, M. Yoon and J. H. Park, "Lightweight Flatbed Trailer Design by Using Topology and Thickness Optimization," Struct Multidisc Optim, Vol.41, No.2, pp.295-307, 2010.
J. G. Kim and J. G. Lee, "Static and Dynamic Finite Element Analyses of a Bulk-Cement Trailer," Transactions of the KSME(A), Vol.36, No.8, pp.945-951, 2012.
M. P. Bendsoe and O. Sigmund, Topology Optimization: Theory, Methods and Applications, Springer, Heidelberg, 2004.
I. G. Jang, K. Kim and B. M. Kwak, "Conceptual and Basic Designs of the Mobile Harbor Crane based on Topology and Shape Optimization," Struct Multidisc Optim, Vol.50, No.3, pp.505-515, 2014.
S. H. Yoon and Y. K. Yoon, "Topology Optimization of Cylinder Block using Component Mode Synthesis," Transactions of KSAE, Vol.11, No.3, pp.177-183, 2003.
I. G. Jang, Y. H. Sung, E. J. Yoo and B. M. Kwak, "Pattern Design of a Non-pneumatic Tyre for Stiffness Using Topology Optimization," Engineering Optimization, Vol.44, No.2, pp.119-131, 2012.
R. J. Yang and A. I. Chahande, "Automotive Applications of Topology Optimization," Structural Optimization, Vol.9, Issue 3, pp.245-249, 1995.
J. J. Joo, G. W. Reich and J. T. Westfall, "Flexible Skin Development for Morphing Aircraft Applications via Topology Optimization," Journal of Intelligent Material Systems and Structures, Vol.20, Issue 16, pp.1969-1985, 2009.
C. Choi and K. I. Bae, "The Stress Analyses of Chassis Components in the Early Stage of Vehicle Development," The Korean Society of Mechanical Engineers, Vol.36, No.9, pp.876-885, 1996.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.