최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.34 no.2, 2017년, pp.260 - 270
이수 (창원대학교 화공시스템공학과) , 문성진 (창원대학교 화공시스템공학과) , 박정주 (한경 TEC 기술연구소)
Zirconia has white color and physical, chemical stability, also using in high temperature materials and various industrial structural ceramics such as heat insulating materials and refractories due to their low thermal conductivity, excellent strength, toughness, and corrosion resistance. If hydroph...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
지르코늄의 특징은? | 원자번호 40번 원소인 지르코늄은 널리 알려진 큐빅 다이아몬드의 구성 원소이다. 지르코늄은 천연 금속 중에서 중성자를 흡수하는 정도가 가장 낮아 원자로의 구조물로도 이용되며, 지르코늄 합금은 내열성과 내부식성이 뛰어나다. 이러한 지르코늄의 산화물인 지르코늄 다이옥사이드, 즉 지르코니아는 유백색의 색상을 띄는 물질이며 물리적 성질 및 생체적합성이 뛰어날 뿐만 아니라 열에 의하여 기전력을 발생시키고 높은 산소이온전도성을 나타내며, 물리적·화학적으로 안정하기 때문에 기계적 성질, 열적 성질 및 전기적 성질이 우수하다. | |
나노지르코니아의 분말을 제조하는 방식에 따라 나노 분말 합성법을 분류하면? | 그리고 우리나라에서는 산업적 용도로 나노지르코니아를 사용하고 있다. 이러한 나노 분말의 합성 방법은 분말을 제조하는 방식에 따라서 top down 방식과 bottom up 방식이 있는데, top down 방식은 물리적 방법으로 입자가큰 분말을 볼밀링 등을 이용해 작게 만드는 것이고, bottom up 방식은 화학적 방법으로 원자나 분자들이 반응하게 하여 조립해 나가는 방식이다. 또한, 나노지르코니아 분말 합성에는 반응상태에 따라 고상반응법, 액상반응법, 기상반응법으로 구별되는데, 그 중 액상반응법은 고상법과 기상법에 비해 제조비용이 낮고 고순도 분말의 제조가 용이하며, 균일한 조성 및 크기가 제어된 분말을 제조할 수 있는 장점이 있다. | |
지르코니아의 특징은? | 지르코늄은 천연 금속 중에서 중성자를 흡수하는 정도가 가장 낮아 원자로의 구조물로도 이용되며, 지르코늄 합금은 내열성과 내부식성이 뛰어나다. 이러한 지르코늄의 산화물인 지르코늄 다이옥사이드, 즉 지르코니아는 유백색의 색상을 띄는 물질이며 물리적 성질 및 생체적합성이 뛰어날 뿐만 아니라 열에 의하여 기전력을 발생시키고 높은 산소이온전도성을 나타내며, 물리적·화학적으로 안정하기 때문에 기계적 성질, 열적 성질 및 전기적 성질이 우수하다. 이러한 특성 때문에 단열재, 내화물과 같은 고온에서 사용되는 재료와 각종 산업용 구조세라믹스 및 고체 전해질로도 사용이 가능하다 [1-3]. |
B. Sathyaseelan, E. Manikandan, I. Baskaran, K. Senthilnathan, K. Sivakumar, M. K. Moodley, R. Ladchumananandasivam, and M. Maaza, Studies on structural and optical properties of $ZrO_2$ nanopowder for opto-electronic applications, J. Alloys and Comp., 694, 556 (2017).
K. A. Aly, N. M. Khalil, Y. Algamal, and Q. M. A. Saleem, Estimation of lattice strain for zirconia nano-particles based on Williamson-Hall analysis, Mat. Chem. Phys., 193, 182 (2017).
H. Y. Yun, C. S. Park, M. Y. Shin, and J. J. Ahn, Study on synthesis and characterization of zirconia nano powder, Petro. Soc. Kor., 48 (2004).
H. Cheng, Li. Wu, J. Ma, Z. Zhang, and L. Qi, The effects of pH and alkaline earth ions on the formation of nanosized zirconia phases under hydrothermal conditions, J. Euro. Cer. Soc., 19, 1675 (1999).
H. Kumazawa, T. Inoue, and E. Sada, Synthesis of fine spherical zirconia particles by controlled hydrolysis of zirconium alkoxide in the high temperature range above $50^{\circ}C$ , Chem. Eng. J., 55, 93 (1994).
G. Dell'Agli and G. Mascolo, Hydrothermal synthesis of $ZrO_2-Y_2O_3$ solid solutions at low temperature, J. Euro. Cer. Soc., 20, 139 (2000).
K. Y. Oh, Properties of yttria stabilized zirconia-alumina powders prepared by coprecipitation method, J. Kor. Cer. Soc., 34(11), 1113 (1997).
S. Kango, S. Kalia, A. Celli, J. Nujuguna, Y. Habibi, and R. Kumar, Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites-A review, Prog. Polym. Sci., 38, 1232 (2013).
R. S. Faibish, and Y. Cohen, Foulingresistant ceramic-supported polymer membranes for ultrafiltration of oil-inwater microemulsions, J. Memb. Sci., 185, 129 (2001).
J. K. Park, K. C. Song, H. U. Kang, and S. H. Kim, Preparation of hydrophilic coating film using GPS(Glycidoxypropyl Trimethoxysilane), Hwahak Konghak, 40(6), 735 (2002).
Y. Cui, Z. Chen, and X. Liu, Preparation of UV-curing polymer- $ZrO_2 hybrid nanocomposites via autohydrolysis sol-gel process using zirconium oxychloride octahydrate coordinated with organic amine, Prog. Org. Coat., 100, 178 (2016).
H. Althues, J. Henle, and S. Kaskel, Functional inorganic nanofillers for transparentpolymers, Chem. Soc. Rev., 36, 1454 (2007).
A. Tadjarodi, M. Haghverdi, V. Mohammadi, and M. Rajabi, Synthesis and characterization of hydrophobic silica aerogel by two step(Acid-Base) Sol-Gel process, J. Nanostructures, 3, 181 (2013).
A. P. Rao, A. V. Rao, and G. M. Pajonk, Hydrophobic and physical properties of the ambient pressure dried silica aerogels with sodium silicate precursor using various surface modification agents," Appl. Surf. Sci., 253(14), 6032 (2007).
S. Scholz, S. Kaskel, Surface functionalization of $ZrO_2$ nanocrystallites for the integration into acrylate nanocomposite films, J. Col. Interface Sci., 323, 84 (2008).
K. Luo, S. Zhou, L. Wu, and G. Gu, Dispersion and functionalization of nonaqueous synthesized zirconia nanocrystals via attachment of silane coupling agents, Langmuir, 24, 11497 (2008).
W. F. A. Besling, A. Goossens, B. Meester, and J. Schoonman, Laserinduced chemical vapor deposition of nanostructured silicon carbonitride thin films, J. Appl. Phys., 83, 544 (1998).
S. Y. Park, N. Kim, U. Y. Kim, S. I. Hong and H. Sasabe, Plasma polymerization of hexamethyldisilazane, Polym. J., 22(3), 242 (1990).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.