최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓小兒齒科學會誌 = Journal of the Korean academy of pediatric dentistry, v.44 no.2, 2017년, pp.200 - 209
정화경 (조선대학교 치과대학 소아치과학교실) , 이난영 (조선대학교 치과대학 소아치과학교실) , 이상호 (조선대학교 치과대학 소아치과학교실)
The aim of this study was to evaluate the shear bond strength (SBS) of three typical restorative materials - glass ionomer cement (GIC), resin-modified glass ionomer (RMGIC) and composite resin (CR) - to different pulp capping materials, i.e., Theracal
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
직접치수복조술 시, 성공적인 치료결과를 얻기 위해서 무엇이 필수적인가? | 직접치수복조술 시, 성공적인 치료결과를 얻기 위해서는 치수 상태의 정확한 진단, 우식 제거, 미세누출 방지, 무균적 술식이 필수적이며, 적절한 치수복조재를 선택해 적용해야 한다[1]. 이때 사용되는 치수복조재는 밀폐능력이 우수하고, 상아질교 형성을 촉진시킬 수 있어야 하며, 습윤한 환경에서도 경화되고, 적절한 압축강도와 경도를 가지는 생체친화성 재료이어야 한다[3]. | |
적절한 치수복조재의 조건은 무엇인가? | 직접치수복조술 시, 성공적인 치료결과를 얻기 위해서는 치수 상태의 정확한 진단, 우식 제거, 미세누출 방지, 무균적 술식이 필수적이며, 적절한 치수복조재를 선택해 적용해야 한다[1]. 이때 사용되는 치수복조재는 밀폐능력이 우수하고, 상아질교 형성을 촉진시킬 수 있어야 하며, 습윤한 환경에서도 경화되고, 적절한 압축강도와 경도를 가지는 생체친화성 재료이어야 한다[3]. 또한 치료 실패의 원인이 주로 잔존 세균에 의한 감염이나 수복물 변연의 미세누출로 인한 새로운 세균의 감염에서 비롯된다는 점에서, 상부 수복재와 안정적인 결합을 이룰 수 있어야 한다[4]. | |
직접치수복조술이란 무엇인가? | 건전한 치수 혹은 가역성 치수염이 있는 치아에서 우식, 외상 또는 의인성으로 치수가 노출된 경우, 치수생활력을 보존하기 위해 직접치수복조술을 시행할 수 있다. 직접치수복조술은 우식 등의 자극인자를 제거하고, 치수조직 치유와 수복상아질 형성이 이루어질 수 있도록 치수 상방에 생체적합성 재료를 적용하는 술식으로, 치아를 보존하고 미성숙 영구치일 경우 지속적인 치근발육을 가능하게 한다는 점에서 소아청소년치과에서 중요한 영역을 차지하고 있다[1,2]. |
Akhlaghi N, Khademi A : Outcomes of vital pulp therapy in permanent teeth with different medicaments based on review of the literature. Dent Res J, 12:406-417, 2015.
Cantekin K : Bond strength of different restorative materials to light-curable mineral trioxide aggregate. J Clin Pediatr Dent, 39:143-148, 2015.
Gulati S, Shenoy VU, Margasahayam SV : Comparison of shear bond strength of resin-modified glass ionomer to conditioned and unconditioned mineral trioxide aggregate surface: An in vitro study. J Conserv Dent, 17:440-443, 2014.
Ajami AA, Navimipour E, Daneshpooy M, et al. : Comparison of shear bond strength of resin-modified glass ionomer and composite resin to three pulp capping agents. J Dent Res Dent Clin Dent Prospects, 7:164-168, 2013.
Nowicka A, Lipski M, Buczkowska-Radlinska J, et al. : Response of human dental pulp capped with biodentine and mineral trioxide aggregate. J Endod, 39:743-747, 2013.
Cantekin K, Avci S : Evaluation of shear bond strength of two resin-based composites and glass ionomer cement to pure tricalcium silicate-based cement ( $Biodentine^{(R)}$ ). J Appl Oral Sci, 22:302-306, 2014.
Deepa VL, Dhamaraju B, Bollu IP, Balaji TS : Shear bond strength evaluation of resin composite bonded to three different liners: TheraCal LC, Biodentine, and resin-modified glass ionomer cement using universal adhesive: An in vitro study. J Conserv Dent, 19:166-170, 2016.
Kaup M, Dammann CH, Schafer E, Dammaschke T : Shear bond strength of Biodentine, ProRoot MTA, glass ionomer cement and composite resin on human dentine ex vivo. Head Face Med, 19;11-14, 2015.
DeHoff PH, Anusavice KJ, Wang Z : Three-dimensional finite element analysis of the shear bond test. Dent Mater, 11:126-131, 1995.
Yoon EY, Lee NY, Lee SH : Shear bond strength of giomer and self-etching primer of the dentin. J Korean Acad Pediatr Dent, 37: 422-428, 2010.
Li J, Liu Y, Sundstrom F, et al. : Flexure strength of resinmodified glass ionomer cements and their bond strength to dental composites. Acta Odontol Scand, 54:55-58, 1996.
Kerby RE, Knobloch L : The relative shear bond strength of visible light-curing and chemically curing glass-ionomer cement to composite resin. Quintessence Int, 23:641-644, 1992.
Bayrak S, Tunc ES, Saroglu I, Egilmez T : Shear bond strengths of different adhesive systems to white mineral trioxide aggregate. Dent Mater J, 28:62-67, 2009.
Shin JH, Jang JH, Park SH, Kim E : Effect of mineral trioxide aggregate surface treatments on morphology and bond strength to composite resin. J Endod, 40:1210-1216, 2014.
Kayahan MB, Nekoofar MH, Dummer PM et al. : Effect of acid-etching procedure on selected physical properties of mineral trioxide aggregate. Int Endod J, 42:1004-1014, 2009.
Cengiz E, Ulusoy N : Microshear bond strength of Tri-calcium silicate-based sements to different restorative materials. J Adhes Dent, 18:231-237, 2016.
Karadas M, Cantekin K, Duymus ZY et al. : Evaluation of the bond strength of different adhesive agents to a resinmodified calcium silicate material (TheraCal LC). Scanning, 10, 2015.
Hashem DF, Foxton R, Banerjee A, et al. : The physical characteristics of resin composite-calcium silicate interface as part of a layered/laminate adhesive restoration. Dent Mater, 30:343-349, 2014.
Yesilyurt C, Yildirim T, Tasdemir T, Kusgoz A : Shear bond strength of conventional glass ionomer cements bound to mineral trioxide aggregate. J Endod, 35:1381-1383, 2009.
Raju VG, Venumbaka NR, Elangovan A, et al. : Comparative evaluation of shear bond strength and microleakage of tricalcium silicate-based restorative material and radioopaque posterior glass ionomer restorative cement in primary and permanent teeth: an in vitro study. J Indian Soc Pedod Prev Dent, 32:304-310, 2014.
Ballal S, Venkateshbabu N, Nandini S, Kandaswamy D : An in vitro study to assess the setting and surface crazing of conventional glass ionomer cement when layered over partially set mineral trioxide aggregate. J Endod, 34:478-480, 2008.
Eid AA, Komabayashi T, Watanabe I, et al. : Characterization of the mineral trioxide aggregate-resin modified glass ionomer cement interface in different setting conditions. J Endod, 38:1126-1129, 2012.
Camilleri J : Investigation of Biodentine as dentine replacement material. J Dent, 41:600-610, 2013.
Lee SR, Moon YM, Hwang SJ, Seo MS : The effect of acidetch procedure on the bond between composite resin and mineral trioxide aggregate. Korean J Dent Mater, 41:53-57, 2014.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.