최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.41 no.10, 2017년, pp.997 - 1004
김승호 (한국승강기대학교 승강기공학부) , 김상부 (창원대학교 산업조선해양공학부) , 김성호 (한국승강기대학교 승강기공학부) , 함승훈 (고려제강 기술개발연구원)
The life of elevator wire ropes is one of the most important characteristics of an elevator, which is closely related to the safety of users and its maintenance policy. It is not cost effective to measure the lifetime of elevator wire ropes during their use. In this study, the life estimation of ele...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
8×19W-IWRC의 특징은? | 전통적으로 사용되고 있는 Fig. 1(b)와 같은 구조인 직경 10mm~12mm, 8×S19-FC(Fiber Core) 방식과는 구조가 틀리고, 특히 내부 심강(Core)이 섬유 심강이 아닌 스틸 심강이기 때문에 강도가 매우 높다. | |
굽힘 사이클 수에 가장 큰 영향을 미치는 항목은? | BOS 방식의 와이어로프 수명을 나타내는 굽힘 사이클 수에 가장 큰 영향을 미치는 항목은 와이어로프 인장하중 S와 로프 직경(d)에 대한 시브 직경(D)의 비 D/d로 알려져 있으며, 이러한 영향을 알아내기 위한 많은 연구들이 이루어지고 있다. (1) | |
엘리베이터용 와이어로프의 특징은? | 엘리베이터의 종류 중 국내외에서 가장 많이 사용되고 있는 로프식 엘리베이터에 적용되는 와이어로프는 엘리베이터의 모든 하중을 견디기 때문에 그 수명이 사용자의 안전과 밀접한 관계가 있다. 엘리베이터용 와이어로프는 인장하중과 반복굽힘하중을 동시에 받는 구조로서, BOS(Bending Over Sheave) 피로로 인한 로프 마모 때문에 소선 파단 수가 증가하고 로프 직경이 감소하는 열화 형태의 고장 메커니즘을 갖고 있다. |
Feyrer, K., 2007, Wire Ropes: Tension, Endurance, Reliability, Springer, New York, pp. 212-221.
Giovannozzi, R., 1967, Report on the Research of the Fatigue of Wire Ropes, OIPEEC Bulletin 8, Torino, pp. 9-10.
Feyrer, K., 1995, "Endurance Calculation of Wire Ropes Running over Sheaves," WIRE, Vol. 45, No. 2, pp. 99-103.
Ridge, I.M.L., Chaplin, C.R. and Zheng, J., 2001, "Effect of Degradation and Impaired Quality on Wire Rope Bending over Sheave Fatigue Endurance," Engineering Failure Analysis, Vol. 8, pp. 173-187.
Yusurf A.Q. and Impark, C.E., 2013, "Experimental Determination of Degradation Influence on Bending over Sheave Fatigue Life of Steel Wire Ropes," Indian Journal of Engineering & Materials Sciences, Vol. 20, pp. 14-20.
Kim, S.H., Ham, S.H. and Kwon, J.D., 2014, "Bending Fatigue Characteristics of Corroded Wire Ropes," Journal of Mechanical Science and Technology, Vol. 28, No. 7, pp. 2853-2859.
Kim, S.H., 2014, "A Study on the Evaluation of Structural Integrity Considering Fatigue for Wire Rope," Ph.D. diss., Yeungnam University.
Park, W.J., Kim, S.H. and Kim, S.B., 2016, "Comparison of Elevator Wire-Rope Life Estimation Methods : Case Study," Proceedings of the KIIE 2016 Spring Annual Meeting, pp. 3257-3263.
DIN 15020-2, 1974, Lifting Appliances, Principles Relating to Rope Drives; Supervision During Operation.
Meeker, W.Q. and Escobar, L.A., 1998, Statistical Methods for Reliability Data, John Wiley & Sons, New York, pp. 336-339.
Feyrer, K., 2007, Wire Ropes: Tension, Endurance, Reliability, Springer, New York, pp. 137-139.
Cox, D.R. and Snell, E.J., 1989, Analysis of Binary Data, Chapman & Hall, London, pp. 1-24.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.