최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.21 no.3, 2017년, pp.86 - 92
The possibility to development of floor vibration problem is larger in case of long span structure under service loads. Therefore, to improve the vibration performance of the floor, increasing of its thickness is a common method. But, increasing of thickness can lead to increase of slab self weight ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
장스팬 구조물의 문제점은 무엇인가? | 장스팬 구조물은 사용하중 하에서 바닥진동 문제가 발생할 가능성이 크다. 따라서 구조물 바닥판의 진동성능을 향상시키기 위한 가장 일반적인 방법은 슬래브의 두께를 증가시키는 것이지만 기존의 구조시스템에서 슬래브의 두께를 증가시키면 슬래브 자중의 증가로 건축물 전체의 효율성이 떨어지게 되는 문제점이 있다. | |
장스팬 구조물의 사용하중 하에서 바닥진동 문제를 해결하기 위한 방법과 그것의 한계점은 무엇인가? | 이에 장스팬 구조와 같은 넓은 바닥판에 대한 관심이 더욱 커지고 있는데 이러한 장스팬 구조물은 사용하중 하에서 바닥진동 문제가 발생할 가능성이 크다. 따라서 구조물 바닥판의 진동성능을 향상시키기 위한 가장 일반적인 방법은 슬래브의 두께를 증가시키는 것이지만 기존의 구조시스템에서 슬래브의 두께를 증가시키면 슬래브 자중의 증가로 작은보가 추가되고 층고가 증가하여 건축물 전체의 효율성이 떨어지게 되는 문제점이 있다. 따라서 슬래브의 두께를 증가시키면서도 자중은 크게 증가하지 않는 바닥판 시스템으로 중공슬래브에 관한 관심이 커지고 있는 상황이다. | |
보이드데크 슬래브 공법의 특징은 무엇인가? | 데크플레이트 공법의 시공 편의성 및 정밀시공, 중공슬래브 공법의 공사비절감 및 사용성 향상 등의 장점을 모두 지닌 보이드데크 슬래브 공법(Void-deck Slab System)은 전체적인 콘크리트 물량의 감소로 인해 CO2 의 발생을 감소시키므로 환경적인 면에서도 긍정적인 평가를 받고 있다. 또한 데크플레 이트의 기능은 거푸집 대용 및 경량성형재의 고정에 국한되어 있으므로 구조계산에서는 제외되지만 실제로는 여분의 내력으로 작용하기 때문에 안전성의 향상에 도움이 된다. |
Roh, Y. G. (2010), Light weight assembly for hollow and light slab using the same, Patent No. 10-0936593.
AIJ (1991), Recommendation for Residential Evaluation Guidelines for Vibration of Buildings, Architectural Institute of Japan.
AISC/CISC (1997), Steel Design Guide Series 11 - Floor Vibration Due to Human Activity, American Institute of Steel Construction.
ANSI S3.29 (1983), Guide for the Evaluation of Human Exposure to Vibration in Buildings, American National Standards Institute.
CAN/CSA-S16.1-M89 (1989), Appendix G - Guide for Floor Vibration, Canadian Standards Association.
Chopra, A. K. (2000), Dynamics of Structures, Prentice Hall, New Jersey.
DIN 4150-3 (1999), Vibration in buildings - Part 3 : Effects on structures, Deutsches Institut fur Normung.
ISO (1989), ISO 2631-2 Mechanical vibration and shock : Evaluation of human exposure to whole body vibration Part 2 : Continuous and shock-induced vibration in buildings(1 to 80Hz), International Organization for Standardization.
ISO (1997), ISO 2631-1 Mechanical vibration and shock : Evaluation of human exposure to whole body vibration Part 1 : General requirements, International Organization for Standardization.
Kim, G. C., and Kim, K. M. (2007), Light weight assembly for hollow and light slab using the same, Journal of the Architectural Institute of Korea, Structure & Construction, 23(4), 59-69.
Kim, M.G., Park, H. J., Lee, D. G., Hwang,H. S., and Kim, H. S. (2009), Performance Evaluation of Floor Vibration of Biaxial Hollow Slab Subjected to Walking Load, Journal of the Earthquake Engineering Society of Korea, 13(5), 11-21.
KS B 0712 (2001), Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings, Korean Standards Association.
KS B 0726 (2001), Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings, Korean Standards Association.
Lee, S. S., Chun, H. M., Lee, J. W., and Hong, K. P. (2006), A Comparative Study on the Evaluation Scales Suggested in Floor Vibration Evaluation Methods, Journal of the Architectural Institute of Korea, Structure & Construction, 22(3), 3-10.
Lenzen, K. H. (1966), Vibration of Steel Joist Concrete Slab Floors, Engineering Journal, 3(1), 133-136.
Wise, J. F., Parmelee, R. A. (1974), Human Perception of Transient Vibration, Journal of the Structural Division, 100(4), 773-787.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.