최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.21 no.2, 2017년, pp.34 - 45
임우영 (원광대학교 건축공학과) , 유영찬 (한국건설기술연구원 건축도시연구소) , 유미나 (한국건설기술연구원 건축도시연구소)
Cyclic loading tests for a total of nine test specimens were performed to evaluate the seismic performance of the exposed steel column-base plate connections. From the tests, flexural strength, deformation capacity, energy dissipation, and initial stiffness were investigated. The primary test parame...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기존의 국내 건축물의 내진설계 실태는? | 국내 기존 건축물의 약 82%는 내진설계가 적용되지 않은비내진 건축물로 지진 발생 시 큰 피해가 예상되는 것으로 보고되고 있다(소방방재청, 2011). 이러한 기존 건축물 중 내진설계 의무대상에서 제외되는 소규모 건축물의 비중은 전체 건축물의 85%를 차지하고 있다(소방방재청, 2011). | |
소규모 건축물이란? | 이러한 기존 건축물 중 내진설계 의무대상에서 제외되는 소규모 건축물의 비중은 전체 건축물의 85%를 차지하고 있다(소방방재청, 2011). 여기서,소규모 건축물은 층수가 2층 이하이고 연면적 500 m2 미만인 건축물을 의미한다(소규모 건축물 구조지침, 2012). 소규모건축물의 경우, 현행 구조 규칙에서는 별도의 구조계산 없이도 건축물의 최소 안전성을 확보할 수 있도록 최소 요구사항을 제시하고 있다. | |
국내 소규모 건축물의 구조 안전성을 확보하기 위한 세부 기준을 마련하는 것이 시급한 이유는 무엇인가? | 소규모건축물의 경우, 현행 구조 규칙에서는 별도의 구조계산 없이도 건축물의 최소 안전성을 확보할 수 있도록 최소 요구사항을 제시하고 있다. 하지만, 소규모 건축물의 설계․ 시공의 영세성으로 인해 구조 전문가들에 의한 면밀한 구조안전성 검토가 제대로 이루어지지 않고 있는 것이 현실이다. 따라서, 이러한 규정만으로는 소규모 건축물이 지진 등과 같은 횡하중에 대한 구조안전성을 확보하기에 부족한 것으로 여겨지고 있다. 이에, 국내 소규모 건축물의 적절한 구조 안전성을 확보하기 위한 세부 기준을 마련하는 것이 시급한 실정이다. |
ACI T1.1-01 (2001), Acceptance Criteria for Moment Frames Based on Structural Testing, American Concrete Institute.
AISC (2005), Steel Construction Manual, Volume II, American Institute of Steel Construction.
ANSI/AISC 341-10 (2010), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction.
Di Sarno, L., Pecce, M. R., and Fabbrocino, G. (2007), Inelastic Response of Composite Steel and Concrete Base Column Connections, Journal of Constructional Steel Research, 63, 819-832.
Drake, R. M., and Elkin, S. J. (1999), Beam-Column Base Plate Design - LRFD Method, Engineering Journal, First Quarter, 29-38.
Fisher, J. M., and Kloiber, L. A. (2006), Design Guide 1: Base plate and anchor rod design, 2nd edition, American Institute of Steel Construction, 13-31.
Fisher, J. M., and West, M. A., (1997), Design Guide 10 : Erection Bracing of Low-rise Structural Steel Building, American Institute of Steel Construction, 11-18.
Gomez, I., Deierlein, G. G., and Kanvinde, A. M. (2010), Exposed Column Base Connections Subjected to Axial Compression and Flexure, Final report presented to the American Institute of Steel Construction, AISC Report, 3.1-3.54; B.1.
Hon, K. K., and Mechers, R. E. (1988), Experimental Behaviour of Steel Column Bases, Journal of Constructional Steel Research, 9, 35-50.
Kanvinde, A. M., Grilli, D. A., and Zareian, F. (2012), Rotational Stiffness of Exposed Column Base Connections: Experiments and Analytical Models, Journal of Structural Engineering, ASCE, 138(5), 549-560.
Korea Concrete Institute (2012), Design Code for Concrete Structures, Kimoondang (in Korean).
Korean Society of Steel Construction (2014), Korean Steel Structure Design Code and Commentary: Load and Resistance Factored Design, Korean Society of Steel Construction (in Korean).
KS B 0801 (2007), The Pieces for Tension Test for Metallic Materials, Korean Standard Association (in Korean).
KS B 0802 (2003), Method of tensile test for metallic materials, Korean Standard Association (in Korean).
Lee, G. H., You, Y. C., Choi, K. S., Koo, H. J., and Yoo, M. N. (2016), The Numerical Study on Capacity Evaluation of Exposed Steel Column-Base Plate Connection, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(5), 26-34 (in Korean).
Lee, S. J., and Song, H. S. (2008), A Study on the Structural Behavior of Eccentrically Loaded Steel Column Base Plates, Korean Society of Steel Construction, 20(2), 323-332 (in Korean, with English abstract).
Lim, W. Y., Kang, T. H. -K., and Hong, S. G. (2016), Cyclic Lateral Testing of Precast Concrete T-Walls in Fast Low-Rise Construction, ACI Structural Journal, 113(1), 179-189.
Melchers, R. E. (1992), Column-Base Response Under Applied Moment, Journal of Constructional Steel Research, 23, 127-143.
National Emergency Management (2011), Development of Technologies for Improvement of Seismic Performance on the Existing Low-Rise Buildings, NEMA.
NZS 3404: Part 1: 2009 (2009), Steel Structures Standard, Part 1: Materials, Fabrication, and Construction, Standards New Zealand.
Thambiratnam, D. P., and Paramasivam, P. (1986), Base Plates Under Axial Loads and Moments, Journal of Structural Engineering, ASCE, 112(5), 1166-1181.
The Korean Structural Engineers Association (2012), Structural Design Criteria and Commentary for One and Two Story Small Buildings, Kimoondang (in Korean).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.