최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.21 no.2, 2017년, pp.95 - 102
장석준 (충남대학교 건축공학과) , 정권영 (충남대학교 건축공학과) , 김선우 (충남대학교 건설공학교육과) , 윤현도 (충남대학교 건축공학과) , 천영수 (한국토지주택공사 토지주택연구원)
This paper describes the experimental results for the structural performance of full-scale coupling beams with different reinforcement layout (diagonal and horizontal). For the reinforcements of the coupling beams, high-strength steel bars(SD500 and SD600) were used in order to improve workability a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
고강도 철근에 대한 현행 규정은 어떠한가? | 고강도 철근의 사용은 배근되는 철근량 감소를 통해 경제성 및 시공성 향상이 가능하며, 부재의 단면 및 구조체 자중 감소를 통한 경제적 설계가 가능한 장점이 있다. KCI-12에서는 주철근과 전단철근에 각각 600 및 500 MPa의 철근을 사용하도록 허용하고 있다. 고강도 철근의 경우 일반강도에 비해 연신율이 감소하는 특성이 있으며, 구조부재 적용을 위한 실험적 연구가 요구된다. | |
병렬전단벽이란 무엇인가? | 전단벽은 고층건물에서 풍하중 및 지진하중에 저항하는 효율적인 요소로 사용되고 있다. 전단벽은 출입구 및 창문 등, 다양한 기계설비적 이유로 인해 개구부가 발생할 수 있으며, 두 전단벽이 보로 연결된 구조시스템을 병렬전단벽이라고 한다. 연결보는 병렬전단벽 시스템에서 두 벽체를 연결하는 구조 부재로써, 연결보의 성능은 병렬전단벽의 구조성능을 결정하는 중요한 요인으로 평가되고 있다. | |
고강도 철근 사용시 장점은? | 고강도 철근의 사용은 배근되는 철근량 감소를 통해 경제성 및 시공성 향상이 가능하며, 부재의 단면 및 구조체 자중 감소를 통한 경제적 설계가 가능한 장점이 있다. KCI-12에서는 주철근과 전단철근에 각각 600 및 500 MPa의 철근을 사용하도록 허용하고 있다. |
ACI Committee 318 (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute.
ASCE/SEI 41-13 (2013), Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers.
Chang, Y. H. (2012), Study on Detailing for Reinforced Concrete Coupling Beam of Shear Wall, Master's thesis, Department of Civil Engineering, National Taiwan University (in Chinese).
Galano, L., and Vignoli, A. (2000), Seismic behavior of short coupling beams with different reinforcement layouts, Structural Journal, 97(6), 876-885.
KCI (2012), Design Code for Concrete Structural, Korean Concrete Institute (in Korean).
KCI and LH (2015), Test of Shear Wall and Coupling Beam for Calibration of Nonlinear Modeling Parameters (in Korean).
KS D 3504 (2016), Steel Bars for Concrete Reinforcement, Korean Standards Association (in Korean).
KS F 2403 (2014), Standard Test Method of Making and Curing Concrete Specimens, Korean Standards Association (in Korean).
KS F 2405 (2010), Standard Test Method for Compressive Strength of Concrete, Korean Standards Association (in Korean).
Lim, E., Hwang, S. J., Cheng, C. H., and Lin, P. Y. (2016), Cyclic Tests of Reinforced Concrete Coupling Beam with Intermediate Span-Depth Ratio, ACI Structural Journal, 113(3), 515-524.
Lim, E., Hwang, S. J., Wang, T. W., and Chang, Y. H. (2016), An Investigation on the Seismic Behavior of Deep Reinforced Concrete Coupling Beams, ACI Structural Journal, 113(2), 217-226.
Naish, D., Fry, A., Klemencic, R., and Wallace, J. (2013), Reinforced concrete coupling beams-part II: modeling, ACI Structural Journal, 110(6), 1067-1075.
Pan, A., and Moehle, J. P. (1989), Lateral displacement ductility of reinforced concrete flat plates, Structural Journal, 86(3), 250-258.
Park, R., and Paulay, T. (1975), Reinforced Concrete Structural, JOHN WILEY and SONS.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.