최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.50 no.5, 2017년, pp.301 - 307
The purpose of this study is to investigate the electrical properties of thick-film resistor (TFR) prepared from
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
유리상을 사용할때 적절한 유리 조성을 선택하는 것이 매우 중요한 이유는? | 일반적으로 후막저항 재료는 저항값이 낮고 전기전도를 담당하게 되는 RuO2나 루테네이트(ruthenate)와 같은 도전상(conductive phase)과 저항값이 높으면서 기판과의 접합력을 부여하는 역할을 하는 유리(glass) 산화물을 유기 바인더에 분산시킨 점성이 있는 페이스트 형태로 만들어진다. 그 중, 유리상은 기판과의 접합을 높이는 역할을 하기 때문에 적절한 유리 조성을 선택하는 것이 매우 중요하다. 현재 상용화 되어있는 알루미나 기판용 저항페이스트에서는 납(Pb)이 포함되어있는 저융점의 유리 조성을 사용하고 있다[5, 6]. | |
스크린 프린팅을 이용해 제작된 후막저항에 최근 발생하는 문제는? | 스크린 프린팅(screen printing) 방법에 의해 제조되는 후막저항은 기존에는 알루미나(Al2O3) 기판 위에 형성되었다. 그러나, 최근 전자 부품의 소형화,고주파수화, 고전력화에 따라 단위 면적당 방출하는 열이 증가하기 때문에 칩이나 회로의 신뢰도 및 수명을 저하하는 문제가 발생한다. 이를 해결하기 위해 최근에는 질화알루미늄(AlN)과 같은 우수한 열전도도를 가지는 기판이 알루미나 기판을 대체하여 사용하게 되었다[3, 4]. | |
RuO2계 후막저항이 칩저항과 혼성미세회로 등에 광범위하게 응용되는 이유는? | RuO2계 후막저항(thick film resistor)은 RuO2과유리(glass) 성분의 비를 조절함으로써 넓은 범위의 저항값을 구현할 수 있고, 우수한 온도저항계수(temperature coefficient of resistance, TCR)을 가지고 있기 때문에 칩저항과 혼성 미세회로(hybridmicrocircuits) 등에 광범위하게 응용되고 있다[1, 2]. |
C. S. Mccandish and A. L. Dow, Outlook for thick film hybrids 1985 - 90, Am. Ceram. Soc. Bull., 63 (1985) 547.
T. Inokuma, Y. Taketa and M. Haradome, The Microstructure of $RuO_2$ thick film resistors and the Influence of glass particle size on their electrical properties, IEEE Trans. Component, Hybrid. Manuf Tech., CHMT-7 [2] (1984) 166-75.
F. Miyashiro, N. Iwase, A. Tsuge, F. Ueno, M. Nakahashi and T. Takahashi, High thermal conductivity aluminum nitride ceramic substrates and packages, IEEE trans. Components, Hybrids and Manufacturing Technology, 13 (1990) 313-319.
G. Reppe, C. Kretzschmar, A. Scheffel, H. Thust, T. Kirchner and M. Grobe, Realization of attenuators and termination in thick film technology on AlN-substrates, 11th European Microelectronics conference (1997) 69-76.
O. Abe, Y. Taketa and M. Haradome, The effect of various factors on the resistance and TCR of $RuO_2$ thick film resistors-Relation between the electrical properties and particle size of constituents, the physical properties of glass and firing temperature, Active and Passive Elec., 13 (1988) 67-83.
M. Hrovat, Z. Samardzija and J. Holc, The development of microstructural and electrical characteristics in some thick-film resistors during firing, J. Mater. Sci., 37 (2002) 2331-39.
C. Kretzschmar, P. Otschik, K. Jaenicke-Rossler and D. SchlAfer, The reaction between ruthenium dioxide and aluminium nitride in resistor pastes, J. Mater. Sci., 28 (1993) 5713-16.
L. S. Chen, S. L. Fu and J. H. Wu, Electrical properties of $Al_2O_3$ and $MnO_2$ -doped thick film resistors on AlN substrates, Jpn. J. Appl. Phys., 41 (2002) 2969-73.
M. V. H. Rao, V. D. Giramkar, G. J. Phatak, D. P. Amalnerkar, K. S. Sastri and V. N. Krishnamurthy, Microstructure and electrical properties of 'pre-sintered bismuth ruthenate-glass composite' based thick film paste for resistor application, International Journal of Electronics, 92 (2005) 451-466.
R. W. Vest; Ceramic Materials for Electronics: Processing, Properties and Application, ed. R. C. Buchanan, Marcel Dekker 2nd ed., New York (1991) 473.
T. Yamaguchi and K. Iizuka, Microstructure development in $RuO_2$ -glass thick film resistors and its effect on the electrical resistivity, J. Am. Ceram. Sci., 73 (1984) 166-75.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.