최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기도시과학= Journal of urban science, v.7 no.2, 2018년, pp.21 - 27
김호영 (영남대학교 건설시스템공학과) , 심혜정 (인천대학교 도시과학대학 건축학과)
With the increase of the skyscraper center, the development of large-diameter and high-strength reinforcing bars is being carried out to solve the dense reinforcement. In case of the steel reinforced concrete with a small cross section such as beam-column joints, the development length becomes short...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
확대머리철근이란? | 확대머리철근은 갈고리철근의 단점을 보완하기 위해 갈고리를 생략하고 철근 단부에 정착판을 부착한 철근으로 갈고리철근 정착길이의 80%로 규정되어있다. | |
대구경 및 고강도 철근의 개발의 개발 목적은? | 초고층 건축물이 증가하면서, 철근 밀집 부위의 과밀배근을 해소하기 위해 대구경 및 고강도 철근의 개발이 이루어지고 있다. | |
철근 밀집 부위에서 정착 길이가 부족해지는 문제를 해결하는 방법은? | 슬래브-벽체 접합부, 보-기둥 접합부와 같은 작은 단면의 철근 밀집 부위에서는 직선철근을 사용할 경우, 정착길이가 부족해진다. 이러한 경우, 갈고리철근 및 확대머리철근과 같이 지압에 의한 정착을 이용하면 정착길이가 부족해지는 문제를 해결할 수 있다. |
ACI Committee 352R (2002), "Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures", ACI, Farmington Hills, Mich., USA, 2002, 38
ASTM A615 (2016), "Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement", ASTM, West Conshohocken, PA, 8.
ASTM A970 (2015), "Standard Specification for Headed Steel Bars for Concrete Reinforcement", ASTM, West Conshohocken, PA., 9 pp.
Bae, M.-S., Chun, S.-C., and Kim, M.-G., (2016), "Behavior of 550 MPa 43 mm Hooked Bars Embedded in Beam-Column Joints", Journal of the Korea Concrete Institute, 28(5), 611-620 (In Korean)
Bashandy T. R., (1996), "Application of Headed Bars in Concrete Members", Ph.D, The University of Texas at Austin. 303pp.
Chun, S. C., (2015), "Lap Splice Tests Using High-Strength Headed Bars of 550MPa (80ksi)", Yield Strength ACI Structural Journal, 112(6). 679-688.
Chun, S. C., Bae, M. S., and Lee, B. S., (2017), " Side-Face Blowout Strength of 43 and 57 mm(No. 14 and No. 18) Hooked Bars in Beam-Column Joints", ACI Structural Journal, 114(5), 1227-1238
Chun, S. C., Choi, C. S., Jung, H. S., (2017) Side-Face Blowout Failure of Large-Diameter High-Strength Headed Bars in Beam-Column Joints. ACI Structural Journal. 114(1). 1-12.
Korea Concrete Institute (KCI) (2012), "Concrete Design Code and Commentary" Kimoondang Publishing Company, Seoul, 2012, 599 (In Korean)
KS D 3504: (2016), "Steel Bars for Concrete Reinforcement", Korean Agency for Technology and Standards, 2016, 31
Marques, J. L. G. and Jirsa, J. O., (1975), "A Study of Hooked Bar Anchorages in Beam-Column Joints", ACI Journal, Proceedings, 72(5), 198-209.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.