최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.17 no.1, 2018년, pp.63 - 68
이경일 (조선대학교 기계시스템공학과) , 김재열 (조선대학교 기계시스템.미래자동차공학부)
At present, ultra-precision cutting technology has been studied in Korean research institutes, focusing on development of ultra-precision cutting tool technology and ultra-precision control engineering. However, the developed technologies are still far behind advanced countries. It focuses on metals...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Rz는 무엇에 영향을 받는가? | Rz는 최대 표면 거칠기이기 때문에 높은 산이나 깊은 골에 의해 쉽게 영향을 받고 먼지나 티끌의 입자, 홈, 긁힌 자국에 영향을 많이 받을 뿐 아니라 측정시의 진동에 의해서도 많은 영향을 받는다. | |
초정밀 가공에서 가공정밀도에 큰 영향을 주는 것은 무엇인가? | 초정밀 가공에서 이송계 등의 주요 부품의 운동특성이 가공정밀도에 큰 영향을 가진다. 기존 연구로는 음성이나 영상 신호처리, 지진파, 의료, 진동신호의 분석 등에서 많은 응용과 연구가 이루어지고 있다 [4~5] . | |
초정밀 절삭기술의 단점을 해소하기 위해 연구중인 것은? | 그러나 선진국에 비하여 그 개발수준이 미력하며 선삭의 특성상 고정밀도가 필요한 알루미늄, 구리, 니켈 등의 금속 및 플라스틱, 실리콘, 게르마늄 등의 비금속 등이 사용되고 있으며 이런 재료들은 연삭 가공으로는 높은 정도를 내기 어렵다. 이러한 단점을 해소하기 위하여 고정도, 고강성을 지닌 초정밀 가공기와 내마모성이 큰 다이아몬드공구를 이용한 초정밀 절삭 가공 기술이 발전하고 있다. [1~3] . |
Kim, J. Y., Park, D. K., Lee, G. I., Gao, J. C., "Research on the Design of the Ultra-high-precision Positioning Control Error Compensation," IJPEM pp. 1351-1358, 2016.
Kim, J. Y., Lee, H. N., Kwac, L. K., Han, J. H., Cho Y. T., Jun C. G., "Control Performance Evaluation of Ultra Precision Positioning Apparatus," Proc. ISIM 2000, pp. 252-255, 2000.
Lee, G. L., and Kim, J. Y., Yoon, S. U., Jung, Y. S., "Assessment of soundness by applying of Optimal design hybrid CURVIC gear and IRT technique," Journal of Advanced Engineering and Technology, Vol. 9, No. 4, pp. 309-314, 2016.
Geyl, R., "Design and Farication of Three Mirror Flat Field Anastigmat for High Resolution Earth Observation," SPIE, Vol.2210, pp. 739-745, 1994.
Park, D. K., "A Study on the Performance Evaluation about nm-level design of Ultra-precision Machine and Error Compensation Produced," A Thesis for a Doctorate, Chosun University, Republic of Korea, 2016.
Cho, J. H., Moon, D. J., Lee, J. C., "A Study om the CAE Analysis of Bed of Multi-Tasking Machine for Automotive Power Train Shafts," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 9-14, 2015.
Choi, Y. S., Lee, W. S., Hwang, I. H., Park, H. K., Jo, H. T., Lee, Y. S., Kim, K. J., Song, S. T., Lee, J. C., "A Study on the Structural Analysis of Automotive Crankshaft Multi Grinding Machine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 20-25, 2012.
Han, M. S., Jo, J. U., "A Study on Durability of Under Bar at car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015.
Jeong, S. H., Cha, K. R., Kim, H. U., Na, Y. C., "Development of Virtual Prototype for Labeling Unit on the Automatic Battery Manufacturing Line," KSMTE Conference, 2002. 4., pp. 357-362, 2002.
Lee, G. I., Kim, J. Y., "Evaluation of Reliability of Large Hybrid Curvic Gear by Using Thermography," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 146-152, 2017.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.