최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기청정기술 = Clean technology, v.24 no.4, 2018년, pp.357 - 364
Studies on the production of biogas from third generation biomass, such as micro- and macroalgae, have been conducted through experiments of various scales. In this paper, we investigated the feasibility of commercialization of integrated combined heat and power (CHP) production using biogas derived...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
연료전지의 장점은 무엇인가? | 다른 기존의 고정발전(stationary power generation)과 비교할 때 연료전지는 연소 없이 화학 에너지를 직접 전기 에너지로 변환하고 열 및 수소를 동시에 생산하도록 구성될 수 있다[4]. 연료전지는 조용하고 연소 기반 발전기보다 높은 전기 효율을 제공할 뿐만 아니라, 탄화수소 오염 물질 배출량도 적다[5]. 여러 연료전지 중 고체산화물 연료전지(Solid Oxide Fuel Cells, SOFC)는 가장 높은 온도(약 750 ~ 1,000 ℃)에서 운전되어, 이러한 과도한 열은 열병합발전(combined heat and power, CHP) 공정 내에서 활용되어 시스템 효율을 높이고 더 많은 전기를 생산하는데 가장 이상적이다. | |
다시마의 혐기성 소화 공정에서 생산 된 가스는 주로 무엇을 포함하는가? | [3]은 산업 규모의 바이오 가스를 생산하는 다시마의 혐기성 소화 공정을 설계하고 모사하였다. 이러한 공정에서 생산된 가스는 주로 메탄(CH4), 이산화탄소 (CO2), 수소(H2) 및 물(H2O)을 포함하며, 터빈 발전기는 물론 연료 전지와 같은 발전 시스템용 연료로 활용될 수 있다. | |
다시마를 원료로 사용할 경우 최대 얼마만큼의 바이오메탄을 얻을 수 있는가? | 바이오매스의 여러 전환 경로 중 바이오 가스를 생산하는 혐기성 소화는 가장 오래된 생화학적 전환 경로 중 하나로서, 예전부터 기술이 상당부분 확립되어 사용되고 있다. 이 혐기성 소화를 통해 바이오매스로부터 바이오 메탄을 생산할 수 있는데, 다시마(Saccharina japonica)를 원료로 사용할 경우 최대 20,800 m3·ha-1·yr-1의 바이오 메탄을 얻을 수 있다. 이것은 옥수수 등 곡물계 바이오매스는 물론 다른 거대조류와 비교했을 때 매우 높은 수치이다[2]. |
International Energy Outlook 2017, U.S. Energy Information Administration (https://www.eia.gov/outlooks/ieo/pdf/0484(2017).pdf).
Murphy, J. D., Drosg, B., Allen, E., Jerney, J., Xia, A., and Herrmann, C., A perspective on algal biogas, IEA Bioenergy pp. 1-38 (2015).
Fasahati, P., Woo, C. M., Saffron, H. C., and Liu, J. J., "Potential of Brown Algae for Sustainable Electricity Production through Anaerobic Digestion," Energ. Convers. Manag., 135, 297-307 (2017).
Biogas and Fuel Cells Workshop Summary Report, National Renewable Energy Laboratory, Golden, CO, Report No. NREL/ BK-5600-56523 (2013).
Ormerod, R. M, "Solid Oxide Fuel Cells," Chem. Soc. Rev., 32(1), 17-28 (2003).
Dietrich, R.-U., Lindermeir, A., Oelze, J., Spieker, C., Spitta, C., and Steffen, M., "SOFC Power Generation from Biogas: Improved System Efficiency with Combined Dry and Steam Reforming," ECS Trans., 35(1), 2669-2683 (2011).
Kim, J.. Sastri, B.. and Conrad, R., "Solid Oxide Fuel Cell R&D," TechConnect Briefs, 2, 205-207 (2017). (https://briefs.techconnect.org/wp-content/volumes/TCB2017v2/pdf/1069.pdf)
Solid Oxide Fuel Cells and Critical Materials: A Review of Implications, National Energy Technology Laboratory, Pittsburgh, PA, Report No. R102 06 04D1 (2011). (https://www.netl.doe.gov/File%20Library/research/coal/energy%20systems/fuel%20cells/Rare-Earth-Update-for-RFI-110523final.pdf)
Multiyear Research, Development and Demonstration Plan, Fuel Cell Technologies Office, Department of Energy (2017). (https://www.energy.gov/eere/fuelcells/downloads/fuel-cell-te chnologies-office-multi-year-research-development-and-22)
Vora, S. D., Department of Energy Office of Fossil Energy's Solid Oxide Fuel Cell (SOFC) Program, 17th Annual SOFC Workshop, Pittsburgh, PA, July 19-21 (2016).
Arsalis, A. "Thermoeconomic Modeling and Parametric Study of Hybrid SOFC-Gas Turbine-Steam Turbine Power Plants Ranging from 1.5 to 10 MWe," J. Power Sources, 181(2), 313-326 (2008).
Eveloy, V., Karunkeyoon, W., Rodgers, P., and Al Alili, A. "Energy, Exergy and Economic Analysis of an Integrated Solid Oxide Fuel Cell-Gas Turbine-Organic Rankine Power Generation System," Int. J. Hydrogen Energ., 41(31), 13843-13858 (2016).
Trendewicz, A. A., Braun, R. J., "Techno-economic Analysis of Solid Oxide Fuel Cell-Based Combined Heat and Power Systems for Biogas Utilization at Wastewater Treatment Facilities," J. Power Sources, 233, 380-393 (2013).
Cozzolino, R., Lombardi, L., and Tribioli L., "Use of Biogas from Biowaste in a Solid Oxide Fuel Cell Stack: Application to an Off-Grid Power Plant," Renew. Energ., 211, 781-791 (2017).
Zhang, W., Croiset, E., Douglas, P. L. L., Fowler, M. W. W., and Entchev, E., "Simulation of a Tubular Solid Oxide Fuel Cell Stack Using AspenPlusTM Unit Operation Models," Energ. Convers. Manag., 46(2), 181-196 (2005).
Song, C., "Tri-Reforming: A New Process for Reducing $CO_2$ Emissions," Chem. Innov., 31(1), 22-26 (2001).
Chiodo, V., Galvagno, A., Lanzini, A., Papurello, D., Urbani, F., Santarelli, M., and Freni, S., "Biogas Reforming Process Investigation for SOFC Application," Energ. Convers. Manag., 98, 252-258 (2015).
Lee, T. S., Chung, J. N., Chen, Y. C., "Design and Optimization of a Combined Fuel Reforming and Solid Oxide Fuel Cell System with Anode off-Gas Recycling," Energ. Convers. Manag., 52(10), 3214-3226 (2011).
Campanari, S., "Thermodynamic Model and Parametric Analysis of a Tubular SOFC Module," J. Power Sources, 92(1-2), 26-34 (2001).
Humbird, D., Davis, R., Tao, L., Kinchin, C., Hsu, D., Aden, A., Schoen, P., Lukas, J., Olthof, B., and Worley, M., Process Design and Economics for Biochemical Conversion of Lignocellulosic Biomass to Ethanol: Dilute-Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover. No. NREL/TP-5100- 47764. National Renewable Energy Laboratory (NREL), Golden, CO., (2011).
Turton, R., Bailie, R. C., Whiting, W. B., Shaeiwitz, J. A., and Bhattacharyya, D., Analysis, Synthesis, and Design of Chemical Processes, Fourth Edition, Prentice Hall (2012).
Ghirardo, F., Santin, M., Traverso, A., and Massardo, A., "Heat Recovery Options for Onboard Fuel Cell Systems," Int. J. Hydro. Energy, 36(13), 8134-8142 (2011).
Hulse, R. J., Basu, R. S., Singh, R. R., and Thomas, R. H. P., "Physical Properties of HCFO-1233zd (E)," J. Chem. Eng. Data, 57(12), 3581-3586 (2012).
Prabhu, E. Solar Trough Organic Rankine Electricity System (Stores) Stage 1: Power Plant Optimization and Economics. US National Renewable Energy Laboratory, Golden, CO, Technical Report No. NREL/SR-550-39433, 2006.
EG & G Services (Firm). & National Energy Technology Laboratory (U.S.). Fuel Cell Handbook. Morgantown, WV: U.S. Dept. of Energy, Office of Fossil Energy, National Energy Technology Laboratory (2004).
EIA, Average Price of Electricity to Ultimate Customers by End-Use Sector (https://www.eia.gov/electricity/monthly/epm_table_grapher.php?tepmt_5_6_a).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.