$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

The superconductivity and pinning properties of Y2O3-doped GdBa2Cu3O7-δ films prepared by pulsed laser deposition 원문보기

Progress in superconductivity and cryogenics : PSAC, v.20 no.4, 2018년, pp.41 - 45  

Oh, Won-Jae (Department of Materials Science & Engineering, and Research Institute of Advanced materials (RIAM), Seoul National University) ,  Park, Insung (Department of Materials Science & Engineering, and Research Institute of Advanced materials (RIAM), Seoul National University) ,  Yoo, Sang-Im (Department of Materials Science & Engineering, and Research Institute of Advanced materials (RIAM), Seoul National University)

Abstract AI-Helper 아이콘AI-Helper

We have investigated the effect of $Y_2O_3$ nanoparticles on the pinning properties of $Y_2O_3$-doped $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) films. Both undoped and $Y_2O_3$-doped GdBCO films were grown on $CeO_2$-buffered MgO (100) single crystal s...

주제어

표/그림 (5)

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • The structural characteristics of samples were analyzed with an X-ray diffractometer (Bruker D8-Advance, Cu Kα radiation).
  • ion sites. Therefore, in this study, we selected Y2O3 as the dopant to prevent the serious Tc drop and thus to improve the in-field Jc values at relatively high temperatures. Here, we report the effect of the Y2O3 doping content on the Tc variation and the pinning properties of Y2O3-doped GdBCO films.

이론/모형

  • The zero-resistivity critical temperature (Tc,zero) and normal state resistivity were measured by using a standard four-point probe technique. The magnetic hysteresis curves of samples were measured by a SQUID magnetometer (Quantum Design, MPMS XL-5). Magnetic Jc values were calculated from the M-H curves by using an extended Bean’s critical state model [25], where ∆M is the hysteresis loop width, a and b (a < b) are width and length of the rectangular films, respectively.
  • The structural characteristics of samples were analyzed with an X-ray diffractometer (Bruker D8-Advance, Cu Kα radiation). The zero-resistivity critical temperature (Tc,zero) and normal state resistivity were measured by using a standard four-point probe technique. The magnetic hysteresis curves of samples were measured by a SQUID magnetometer (Quantum Design, MPMS XL-5).
본문요약 정보가 도움이 되었나요?

참고문헌 (27)

  1. W. Oh, J. Kim, and S. Yoo, "Enhanced pinning properties of $GdBa_2Cu_3O_{7-{\delta}}$ films with the $Gd_2O_3$ nanoparticles", IEEE Trans. Appl. Supercond., vol. 27, p. 8000605, Jan. 2017. 

  2. S. R. Foltyn, L. Civale, J. L. Macmanus-driscoll, Q. X. Jia, B. Maiorov, H. Wang, and M. Maley, "Materials science challenges for high-temperature superconducting wire", Nat. Mater., vol. 6, pp. 631-642, Sep. 2007 

  3. K. Matsumoto, and P. Mele, "Artificial pinning center technology to enhance vortex pinning in YBCO coated conductors", Supercond. Sci. Technol., vol. 23, p.014001, Dec. 2009 

  4. H. Kutami, T. Hayashida, S. Hanyu, C. Tashita, M. Igarashi, H. Fuji, Y. Hanada, K. Kakimoto, Y. Iijima, and T. Saitoh, "Progress in research and development on long length coated conductors in Fujikura", Physica C, vol. 469, pp. 1290-1293, May. 2009 

  5. M. Rupich, X. Li, C. Thieme, S. sathyamurthy, S. Fleshler, D. Tucker, E. Thompson, J. Schreiber, J. Lynch, D. Buczek, K. Demoranville, J. Inch, P. Cedrone, and J. Slack, "Advances in second generation high temperature superconducting wire manufacturing and R&D at American Superconductor Corporation", Supercond. Sci. Technol., vol. 23, p. 014015, Dec. 2009 

  6. V. Selvamanickam, Y. Chen, X. Xiong, Y. Xie, M. Martchevski, A. Rar, Y. Qiao, R. Schmidt, A. Knoll, K. Lenseth, and C. Weber, "High performance 2G wires: From R&D to pilot-scale manufacturing", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 3225-3230, Jul. 2009 

  7. J. H. Lee, H. Lee, J. W. Lee, S. M. Choi, S. I. Yoo, and S. H. Moon, "RCE-DR, a novel process for coated conductor fabrication with high performance", Supercond. Sci. Technol., vol. 27, pp. 044018, Mar. 2014 

  8. J. L. Macmanus-driscoll, S. R. Foltyn, Q. X. Jia, H. Wang, A. Serquis, L Civale, B. Maiorov, M. E. Hawley, M. P. Maley, and, D. E. Peterson, "Strongly enhanced current densities in superconducting coated conductors of $YBa_2Cu_3O_{7-x}+BaZrO_3$ ", Nat. Mater., vol. 3, pp. 439-443, May. 2004 

  9. A. Goyal, S. Kang, K. J. Leonard, P. M. Martin, A. A. Gapud, M. Varela, M. Paranthaman, A. O. Ijaduola, E. D. Dpecht, J. R. Thompson, D. K. Christen, S. J. Pennycook, and F. A. List, "Irradiation-free, columnar defects comprised of self-assembled nanodots and nanorods resulting in strongly enhanced flux-pinning in $YBa_2Cu_3O_{7-{\delta}}$ films", Supercond. Sci. Technol., vol. 18, pp.1533-1538, Oct. 2005 

  10. Y. Yamada, K. Takahashi, H. Kobayashi, M. Konishi, T. Watanabe, A. Ibi, T. Muroga, and S. Miyata, T. Kato, T. Hirayama, and Y. Shiohara, "Epitaxial nanostructure and defects effective for pinning in $Y(RE)Ba_2Cu_3O_{7-x}$ coated cnoductors", Appl. Phys. Lett., vol. 87, p.132502, Sep. 2005 

  11. P. Mele, K. Matsumoto, T. Horide, A. Ichinose, M. Mukaida, Y. Yoshida, S. Horii, and R. Kita, "Ultra-high flux pinning properties of $BaMO_3$ -doped $YBa_2Cu_3O_{7-x}$ thin films", Supercond. Sci. Technol., vol. 21, p.032002, Feb. 2008 

  12. M. Peurla, P. Paturi, Y. P. Stepanov, H. Huhtinen, Y. Y. Tse, A. C. Bodi, J. Raittila, and R. Laiho, "Optimization of the BaZrO3 concentration in YBCO films prepared by pulsed laser deposition", Supercond. Sci. Technol, vol. 19, pp. 767-771, Jun. 2006 

  13. K. Takahashi, H. Kobayashi, Y. Yamada, A. Ibi, H. Fukushima, M. Konishi, S. Miyata, Y. Shiohara, T. Kato, and T. Hirayama, "Investigation of thick PLD-GdBCO and $ZrO_2$ doped GdBCO coated conductors with high ritical current on $PLD-CeO_2$ capped IBAD-GZO substrate tapes", Supercond. Sci. Technol., vol. 19, no. 9, pp. 924-929, Jul. 2006. 

  14. K. Schlesier, H. Huhtinen, P. Paturi, Y. P. Stepanov, and R. Laiho., "Structural and Superconducting Properties of undoped and BZO-doped GdBCO thin films", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp.3407-3411, Jun. 2009. 

  15. S. Lee, N. Chikumoto, T. Yokoyama, T. Machi, K. Nakao, and K. Tanabe., "Development of In-Plume Pulsed Laser Deposition of high- $I_c$ GdBCO films for coated conductors", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp.3192-3195, Jun. 2009. 

  16. K. Kaneko, K. Furuya, K.Yamada, S. Sadayama, J. S. Barnard, P. A. Midgley, T. Kato, T. Hirayama, M. Kiuchi, T. Matsushita, A. Ibi, Y. Yamada, T. Izumi, and Y. Shiohara, "Three-dimensional analysis of $BaZrO_3$ pinning centers gives isotropic superconductivity in GdBCO", J. Appl. Phys., vol. 108, pp. 063901, Sep. 2010. 

  17. K. Ko, S. Choi, J. Lee, R. Ko, S. Moon, C. Park, and S. Yoo, "Optimization of the $BaSnO_3$ Doping Content in GdBCO coated conductors by pulsed laser deposition", IEEE Trans. Appl. Supercond., vol. 24, no. 6, pp. 6600908, Dec. 2014. 

  18. H. Tobita, K. Notoh, K. Higashikawa, M. Inoue, T. Kiss, T. Kato, T. Hirayama, M. Yoshizumi, T. Izumi, and Y. Shiohara, "Fabrication of $BaHfO_3$ doped $GdBa_2Cu_3O_{7-{\delta}}$ coated conductors with the high $I_c$ of 85 A/cm-w under 3T at liquid nitrogen temperature (77K)", Supercond. Sci. Technol., vol. 25, no. 6, pp. 062002, May. 2012. 

  19. T. Matsushita, H. Nagamizu, K. Tanabe, M. Kiuchi, E.S. Otabe, H. Tobita, M. Yoshizumi, T. Izumi, Y. Shiohara, D. Yokoe, T. Kato, and T. Hirayama, "Improvement of flux pinning performance at high magnetic fields in GdBCO coated conductors with BHO nano-rods through enhancement of $B_{c2}$ ", Supercond. Sci. Technol, vol. 25, no. 12, pp. 125003, Oct. 2012. 

  20. T. Yoshida, A. Ibi, T. Takahashi, M. Yoshizumi, T. Izumi, and Y. Shiohara, "Fabrication of $Eu_1Ba_2Cu_3O_{7-{\delta}}+BaHfO_3$ coated conductors with 141 A/cm-w under 3 T at 77 K using the IBAD/PLD process", Physica C., vol. 504, pp. 42-46, Apr. 2014 

  21. A. A. Gapud, D. Kumar, S. K. Viswanathan, C. Cantoni, M. Varela, J. Abiade, S. J. Pennycook, and D. K. Christen, "Enhancement of flux pinning in $YBa_2Cu_3O_{7-{\delta}}$ thin films embedded with epitaxially grown Y2O3 nanostructures using a multi-layering process", Supercond. Sci. Technol, vol. 18, pp. 1502-1505, Oct. 2005 

  22. M. Malmivirta, L. D. Yao, S. Inkinen, H. Huhtinen, H. Palonen, R. Jha, V. P. S. Awana, S. van Dijken, and P. Paturi, "The angular dependence of the critical current of $BaCeO_3$ doped $YBa_2Cu_3O_{6+x}$ thin films, IEEE Trans. Appl. Supercond., vol. 25, no. 3, p.6603305, Jun. 2015 

  23. P. Mele, R. Guzman, J. Gazquez, T. Puig, X. Obradors, S. Saini, Y. yoshida, M. Mukaida, A. Ichinose, K. Matsumoto, and M. I. Adam, "High pinning performance of $YBa_2Cu_3O_{7-x}$ films added with $Y_2O_3$ nanoparticulate defects", Supercond. Sci. Technol, vol. 28, p. 024002, Dec. 2014 

  24. K. Zhang, B. Dabrowski, C. U. Segre, D. G. Hinks, I. K. Schuller, J. D. Jorgensen, and M. Slaski, "Solubility and superconductivity in $RE(Ba_{2-x}RE_x)Cu_3O_{7+{\delta}}$ systems (RE Nd, Sm, Eu, Gd, Dy)", J. Phys. C: Solid state Phys., vol. 20, pp. L935-L940, 1987 

  25. E.M. Gyorgy, R.B. van Dover, K.A. Jackson, L.F. Schneemeyer, and J.V. Waszczak, "Anisotropic critical currents in $Ba_2YCu_3O_7$ analyzed using an extended bean model", Appl. Phys. Lett., vol. 55, pp.283, May. 1989 

  26. P. Mele, M. I. Adam, T. Suzuki, Y. Yoshida, S. Awaji, A. Ichinose, S. Saini, A. K. Jha, and K. Matsumoto, "Effect of simultaneous addition of 1D and 3D artificial pinning centers in hybrid $YBa_2Cu_3O_{7-x}$ multilayers", Sci. Adv. Mater., vol. 9, pp.1042-1050, Jun. 2017 

  27. M. Miura, B. Maiorov, M. Sato, M. Kanai, T. Kato, T. Kato, T. Izumi, S. Awaji, P. Mele, M. Kiuchi, and T. Matsushita, "Tuning nanoparticle size for enhanced functionality in perovskite thin films deposited by metal organic deposition", NPG. Asia. Mater., vol.9, p. e447, Sep. 2017 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로