최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.53 no.4, 2018년, pp.202 - 206
Lee, Dam-Hee (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) , Li, Xiang Xu (Research Center of Eco-friendly & High-performance Chemical materials) , Cho, Ur-Ryong (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education)
Five solution styrene butadiene rubber/neodymium butadiene rubber (SSBR/NdBR) composites were manufactured using different ratios of SSBR and NdBR. In this study, the composites were reinforced with NdBR and silica to confirm the physical properties of SSBR used for treads of automobile tires and th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
K. Sengloyluan, K. Sahakaro, W. K. Dierkes, and J. W. M. Noordermeer, "Silica-reinforced tire tread compounds compatibilized by using epoxidized natural rubber", Eur. Polym. J., 51, 69 (2014).
N. Rattanasom, T. Saowapark, and C. Deeprasertkul, "Reinforcement of natural rubber with silica/carbon black hybrid filler", Polym. Test, 26, 369 (2007).
F. Saeed, A. Ansarifar, R. J. Ellis, Y. Haile-Meskel, and M. S. Irfan, "Two advanced styrene-butadiene/polybutadiene rubber blends filled with a silanized silica nanofiller for potential use in passenger car tire tread compound", J. Appl. Polym. Sci., 123, 1518 (2012).
Y. P. Wu, Q. S. Zhao, S. H. Zhao, and L. Q. Zhang, "The influence of in situ modification of silica on filler network and dynamic mechanical properties of silica-filled solution styrene-butadiene rubber", J. Appl. Polym. Sci., 105, 112 (2008).
Y. Li, B. Han, L. Liu, F. Zhang, L. Zhang, S. Wen, Y. Lu, H. Yang, and J. Shen, "Surface modification of silica by two step method and properties of solution styrene butadiene rubber (SSBR) nanocomposites filled with modified silica", Comp. Sci. Tech., 88, 69 (2013).
J. Y. Park, "Effect of reactive compatibilizers on the morphology and properties of SBR/NdBR/ $SiO_2$ composites pepared via sol-gel process", Chonnam National University, thesis, (2017).
Yuan Fan and Ur Ryong Cho, "Reinforcement of solution styrene-butadiene rubber by incorporating hybrids of rice bran carbon and surface modified fumed silica", Journal of Vinyl & Additive Technology, 24, 195 (2018).
H. S. Kim, "Wear and fatigue properties of carbon black reinforced SBR and BR", Chonnam National University, thesis, (2001).
S. S. Choi and E. A. Ko, "Novel test method to estimate bound rubber formation of silica-filled solution styrene-butadiene rubber compounds", Polym. Test., 40, 170 (2014).
S. Wolff and M. J. Wang, "Filler-elastomer interaction. Part IV. The effect of the surface energies of fillers on elastomer reinforcement", Rubber Chem. Technol., 65, 329 (1992).
D. H. Kim, "Study on the low-temperature resistance of rubber compound", Chonbuk National University, thesis, (2004).
Li Xiang Xu, Oh Ji Hwan, Kang Shin Hye, Jang Sun Ho, Lee Dam Hee, and Cho Ur Ryong, "Reinforcement effects of sulfonated bamboo charcoal-chitosan (sBC-CS) hybrid for styrene-butadiene rubber latex", Polymer(Korea), 41, 1 (2017).
S. S. Choi and G. Cho, "Influence of 1,2-unit contents on retraction behaviors of SBR vulcanizates", J. Appl. Polym. Sci., 102, 4707 (2006).
K. W. Lim, S. C. Ji, and K. Y. Jung, "Advanced synthetic technology for high performance energy tire tread rubber", Elast. Compos., 44, 232 (2009).
N. Suzukia, M. Itoa, and F. Yatsuyanagi, "Effects of rubber/ filler interactions on deformation behavior of silica filled SBR systems", Polymer, 46, 193 (2005).
S. S. Choi and E. A. Ko, "Novel test method to estimate bound rubber formation of silica-filled solution styrene-butadiene rubber compounds", Polym. Test., 40, 170 (2014).
Y. Li, M. J. Wang, T. Zhang, F. Zhang and X. Fu, "Study of dispersion morphology of silica in rubber", Rubber Chem. Technol., 67, 693 (1994).
S. Wolff and M. J. Wang, "Filler-elastomer interaction. Part IV. The effect of the surface energies of fillers on elastomer reinforcement", Rubber Chem. Technol., 65, 329 (1992).
Z. Hua, W. Shishan, and S. Jian, "Polymer/silica nanocomposites: preparation, characterization, properties, and applications", Chem. Rev., 108, 3893 (2008).
S. S. Choi, "Effect of bound rubber on characteristics of highly filled styrene-butadiene rubber compounds with different types of carbon black", J. Appl. Polym. Sci., 93, 1001 (2004).
J. L. Leblanc, "Elastomer-filler interactions and the rheology of filled rubber compounds", J. Appl. Polym. Sci., 78, 1541 (2000).
S. S. Choi, "Filler-polymer interaction in filled poly butadiene rubber compounds", Eur. Polym. J., 38, 1265 (2002).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.