최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.6 no.1, 2018년, pp.1 - 7
박종범 (경기대학교 일반대학원 건축공학과) , 양근혁 (경기대학교 플랜트.건축공학과) , 황철성 (가천대학교 공과대학 토목환경공학과)
This study examined the effect of binder-to-soil ratio(B/S) and water-to-binder ratio(W/B) on the flow and compressive strength development of soil concrete using high-volume supplementary cementitious materials. As a partial replacement of ordinary portland cement, 10% by-pass dust, 40% ground gran...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소일 콘크리트의 역학적 특성에 영향을 주는 요소는? | 일반적으로 점성토에서는 시멘트의 수화반응 과정에서 생성된 수산화 칼슘(Ca(OH)2)과 2차적인 반응 및 포졸란 반응이 동시에 진행되며, 사질토에서는 시멘트의 수화반응 과정에서 생성된 규산칼슘 수화물(C-S-H)에 의해 강도발현이 이루어진다(Son 2014). 소일 콘크리트의 역학적 특성은 사용 결합재, 토양의 종류, 단위 시멘트양 및 단위수량 등의 영향을 받는다. 국토교통부(Ministry of land, infrastructure and transport, MOLIT)에서는 소일콘크리트의 최소 압축강도를 점성토의 경우 1~2MPa, 사질토의 경우 2~8MPa 를 제시하고 있다(Standard specification for temporary work. | |
소일콘크리트의 강도증진을 위해 단위시멘트량 및 고화제량을 증가시켰을 때 문제점은? | (2003)은 단위 시멘트양 및 고화제량이 증가할수록 소일콘크리트의 강도는 증진함을 보였다. 하지만 단위 시멘트양의 증가는 소일콘크리트의 재료원가 상승의 주요 원인이 될 수 있다. 이와 같은 문제로 Park et al. | |
소일콘크리트의 역할은 무엇인가? | 매입말뚝 삽입 전후에 주입되는 소일콘크리트(Soil concrete) 는 말뚝의 지지력을 증가시키는 한편, 하중 재하 초기 단계에서 파일의 자립을 돕고 파일 주변의 마찰력 향상에 도움이 된다(Choi et al. 2011). 더불어 소일콘크리트는 점성토(Clay soil) 및 사질토에서 점착성능을 향상시킨다(Lee et al. 2011; Kim et al. 2010). 일반적으로 점성토에서는 시멘트의 수화반응 과정에서 생성된 수산화 칼슘(Ca(OH)2)과 2차적인 반응 및 포졸란 반응이 동시에 진행되며, 사질토에서는 시멘트의 수화반응 과정에서 생성된 규산칼슘 수화물(C-S-H)에 의해 강도발현이 이루어진다(Son 2014). |
Choi, H.B., Noh, C.S., Han, B.K., Lee, H.G. (2011). Estimation of field application for the PHC pile backfill recycling In-site soil, Journal of the Korea Institute of Building Construction, 11(1), 63-66 [in Korean].
Kim, B.I., Wee, S.H., Lee, S.H., Kim, Y.U. (2003). Strength characteristics of soil-cement mixed with Inorganic solidification liquid, Journal of the Korean Society of Civil Engineers C, 23(3C), 135-141 [in Korean].
Kim, C.K., Kim, E.J., Kim, J.C., Park, W.K., Park, G.J. (2010). The strength characteristics of soil-cement by the stone sludge mixing rates, Journal of the Korean Society of Civil Engineers, 36(10), 1692-1695 [in Korean].
Kim, Y.S., Yu, G.M., Mun, K.J. (2012). Strength characteristics of solidified soil with hardening agents made of industrial by-products, Journal of the Korean Geotechnical Society, 13(6), 19-26 [in Korean].
Kim, Y.T., Kim, H.J., Lee, J.S. (2007). Experimental Study on mechanical properties of fiber-reinforced lightweight soil, Journal of the Korean Society of Civil Engineers, 27(3C), 159-202 [in Korean].
MOLIT. (2016). Standard Specification for Temporary Work, Ministry of Land, Infrastructure and Transport, Korea [in Korean].
Park, S.S., Kim, Y.S., Lee, J.C. (2007). Unconfined compressive strength of fiber-reinforced cemented sands by fiber reinforcement form, Journal of the Korean Geotechnical Society, 23(8), 159-169 [in Korean].
Shim, J.W. (2010). A study on the strength property of recycled fine aggregate(wet type) mortar with blast furnace slag, Journal of the Korea Institute for Structural Maintenance and Inspection, 14(5), 153-160 [in Korean].
Son, T.I. (2014). Study on the Strength Change according to the Slenderness Ratio of Soil-Cement, Master's Thesis, Department of Civil Engineering Graduate School of Industry Pusan National University [in Korean].
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.