최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.20 no.2, 2018년, pp.485 - 500
서종우 (고려대학교 건축사회환경공학부) , 이인모 (고려대학교 건축사회환경공학부) , 김병규 (고려대학교 건축사회환경공학부) , 권영삼 (고려대학교 건축사회환경공학부)
The behavior of cement-based permeation grouting is divided into three different groups depending on the grain size distribution of the soils: (1) zone of cement-based permeation grouting not feasible; (2) zone of cement-based permeation grouting feasible; and (3) zone in which an accelerating agent...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
시멘트 침투 그라우팅 거동 특성을 흙의 입도분포에 따라 구분하면? | 사질토에서의 시멘트 침투 그라우팅 거동 특성을 실내 챔버 모형실험 결과를 토대로 흙의 입도분포에 따라 시멘트 침투 그라우팅 불가 영역, 시멘트 침투 그라우팅 가능 영역, 그리고 급결제 혼합 필요 영역으로 구분하였다. 시멘트 침투 그라우팅 가능 영역에서는 대표 간극 반지름의 개념을 제안하였고 사질토에서의 평균 간극 반지름에 대한 대표 간극 반지름의 비를 실내실험 결과와 폐색 이론식을 비교함으로 구할 수 있었으며, 입도분포에 따라 1. | |
시간-주입량 곡선의 실험값과 이론값을 비교하여 결정한 방법이 의미하는 바는? | 이 결정 방법이 의미하는 바는 다음과 같다. 먼저 표준편차 b를 0으로 놓은 후의 이론적인 거동은 단일한 간극반경을 가지는 지반에 의한 것이라고 볼 수 있다. 또한 b = 0 조건에서 m값을 바꿔가며 실험값과 이론값을 비교하는 것은 간극 반지름이 분포를 가지는 경우와 단일한 간극반경을 가지는 경우가 동일한 거동을 하도록 하는 m 값을 찾는 과정이다. 그러나 다음과 같이 대표 간극 반지름을 산정하기 위해서는 추가적인 실내 챔버 모형실험이 필요하므 로 본 연구의 목표에 부합하지 않는다. | |
그라우트 침투 프로그램이란? | (2009)의 그라우트 침투 모델 중 일차원 흐름에 관련된 이론식을 바탕으로 일차원 그라우트 침투 프로그램에 대하여 단계적으로 설명하고자 한다. 먼저 그라우트 침투 프로그램이란 주입영역을 미소영역으로 분할하고 미분된 주입시간 동안 발생되는 그라우트의 점도 변화, 그라우트 입자의 흡착으로 인한 간극률, 투수계수, 간극유속, 그리고 흡착계수의 변화를 고려하고 주입시간에 대해 적분 개념을 적용하여 주입시간에 따른 주입량, 그라우트 입자의 흡착량, 지반의 투수 계수 및 간극률을 단계적으로 계산하는 프로그램이다. 해당 프로그램의 가정 사항은 다음과 같다. |
Arya, L.M., Dierolf, T.S. (1992), "Predicting soil moisture characteristics from particle-size distributions: an improved method to calculate pore radii from particle radii", Proceedings of the International Workshop on Indirect Methods for Estimating the Hydraulic Properties of Unsaturated Soils, University of California, Riverside, CA, pp. 115-124.
Joo, E.J., Kim, Y.K., Shin, J.H., Kwon, O.Y. (2010), "Numerical study for the optimum grouting design of subsea tunnels", Journal of Korean Tunnelling and Underground Space Association, Vol. 12, No. 5, pp. 349-358.
Kim, J.S., Lee, I.M., Jang, J.H., Choi, H. (2009), "Groutability of cement-based grout with consideration of viscosity and filtration phenomenon", International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 33, No. 16, pp. 1771-1797.
Lee, J.W., Kim, H.M., Yazdani, M., Park, E.S. (2017), "Influence of design parameters of grout injection in rock mass using numerical analysis", Tunnel and Underground Space, Vol. 27, No. 5, pp. 324-332.
Reddi, L.N., Bonala, M.V.S. (1997), "Analytical solution for fine particle accumulation in soil filters", Journal of Geotechnical and Geoenvironmental Engineering, Vol. 123, No. 12, pp. 1143-1152.
Yang, Z.Q., Hou, K.P., Guo, T.T. (2011), "Study on the effects of different water-cement ratios on the flow pattern properties of cement grouts", Applied Mechanics and Materials, Vol. 71, pp. 1264-1267.
You, K.H. (2011), "Analysis on the effect of strength improvement and water barrier by tunnel grouting reinforcement", Journal of Korean Tunnelling and Underground Space Association, Vol. 13, No. 4, pp. 291-304.
You, K.H., Jie, H.K., Seo, K.W., Kim, S.J., You, D.W. (2012), "A study on the correlation between the rock mass permeability before and after grouting & injection volume and the parameters of Q system in a jointed rock mass tunnel", Journal of Korean Tunnelling and Underground Space Association, Vol. 14,No. 6, pp. 617-635.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.