본 연구는 ${\bigcirc}{\bigcirc}$ 고속국도 공사 중 발생된 이암 절토 사면의 붕괴 요인 분석 및 대책방안을 제시하였다. 기반암인 이암에 대해 실내시험을 수행하고, 국제 기준에 의거해 공학적인 특성을 규명하였다. 그리고 설계 시 수행되었던 사면안정해석을 재검토 하였다. 또한, Swelling-Slaking 현상으로 인해 기반암인 이암의 강도열화특성을 고려한 안정해석을 추가적으로 수행하였다. 기반암인 이암에 대해 Swelling-Slaking Test 결과, 풍화내구성은 낮음-보통으로 나타났으며, 팽창변형률은 매우 낮음으로 나타났다. 설계 안정해석 검토 결과, 이암의 공학적 특성을 고려하지 않고, 한계평형해석을 이용해 실제와 상이한 결과가 나타났다. 강도열화특성을 고려한 추가안정해석 결과, 사면의 붕괴지점과 안정해석의 최대전단변형률 발생지점이 동일하게 나타났으며, 건기시 우기시 모두 기준 안전율을 만족하지 못하였다. 붕괴 사면의 대책방안으로는 사면경사완화공법이 가장 적절하였다. 유한요소해석을 통해 완화 경사를 산정하였다. 완화 경사의 현장 적용성을 위해 시추공영상촬영과 비교한 결과, 미고결된 이암의 대부분이 제거되는 것으로 나타나 미고결된 이암으로 인한 추가적인 붕괴 위험성은 현격히 저하되는 것으로 나타났다.
본 연구는 ${\bigcirc}{\bigcirc}$ 고속국도 공사 중 발생된 이암 절토 사면의 붕괴 요인 분석 및 대책방안을 제시하였다. 기반암인 이암에 대해 실내시험을 수행하고, 국제 기준에 의거해 공학적인 특성을 규명하였다. 그리고 설계 시 수행되었던 사면안정해석을 재검토 하였다. 또한, Swelling-Slaking 현상으로 인해 기반암인 이암의 강도열화특성을 고려한 안정해석을 추가적으로 수행하였다. 기반암인 이암에 대해 Swelling-Slaking Test 결과, 풍화내구성은 낮음-보통으로 나타났으며, 팽창변형률은 매우 낮음으로 나타났다. 설계 안정해석 검토 결과, 이암의 공학적 특성을 고려하지 않고, 한계평형해석을 이용해 실제와 상이한 결과가 나타났다. 강도열화특성을 고려한 추가안정해석 결과, 사면의 붕괴지점과 안정해석의 최대전단변형률 발생지점이 동일하게 나타났으며, 건기시 우기시 모두 기준 안전율을 만족하지 못하였다. 붕괴 사면의 대책방안으로는 사면경사완화공법이 가장 적절하였다. 유한요소해석을 통해 완화 경사를 산정하였다. 완화 경사의 현장 적용성을 위해 시추공영상촬영과 비교한 결과, 미고결된 이암의 대부분이 제거되는 것으로 나타나 미고결된 이암으로 인한 추가적인 붕괴 위험성은 현격히 저하되는 것으로 나타났다.
This study analyzed the collapse course of a mud stone cut slope during the construction of a express and suggested a countermeasure. Experiments were carried out on bedrock mudstone to investigate the engineering characteristics and the slope stability analysis at the time the design was reviewed. ...
This study analyzed the collapse course of a mud stone cut slope during the construction of a express and suggested a countermeasure. Experiments were carried out on bedrock mudstone to investigate the engineering characteristics and the slope stability analysis at the time the design was reviewed. In addition, stability analysis, considering the strength softening characteristics of the slope due to the Swelling-Slaking phenomenon, was also performed. As a result of the Swelling-Slaking test, the slake durability was Low-Medium, and the swell potential was Very Low. A review of the stability analysis performed at the time of the design showed different results from the actual results because LEM analysis had been performed without considering the engineering characteristics of mudstone. As a result of additional stability analysis considering the strength softening characteristics, the slope collapse point and the maximum shear strain point of the stability analysis were the same and the standard safety factor was not satisfied. As a countermeasure, a slope mitigation method was found to be most appropriate. The mitigation slope was calculated by Finite element Analysis. A comparison with BIPS to determine the applicability of a mitigation slope revealed most of the unconsolidated mudstone.
This study analyzed the collapse course of a mud stone cut slope during the construction of a express and suggested a countermeasure. Experiments were carried out on bedrock mudstone to investigate the engineering characteristics and the slope stability analysis at the time the design was reviewed. In addition, stability analysis, considering the strength softening characteristics of the slope due to the Swelling-Slaking phenomenon, was also performed. As a result of the Swelling-Slaking test, the slake durability was Low-Medium, and the swell potential was Very Low. A review of the stability analysis performed at the time of the design showed different results from the actual results because LEM analysis had been performed without considering the engineering characteristics of mudstone. As a result of additional stability analysis considering the strength softening characteristics, the slope collapse point and the maximum shear strain point of the stability analysis were the same and the standard safety factor was not satisfied. As a countermeasure, a slope mitigation method was found to be most appropriate. The mitigation slope was calculated by Finite element Analysis. A comparison with BIPS to determine the applicability of a mitigation slope revealed most of the unconsolidated mudstone.
H. Y. Lee, "Engineering Properties of Uncemented Mudrock in Yeoju Area, Gyeonggi-Do", Thesis, Department of Civil-Environment Engineering Graduate School Danguk University, 2013.
K. M. No, "The Study of Slaking and Residual Strength of The Mudston", Thesis, Department of Civil Engineering Graduate School Yeungnam University, 2006.
K. W. Kim, "Shear and Compression Characteristics of Mudstone Sedimentary Soils Based on Slaking", Thesis, Department of Civil Engineering Graduate School Dongshin University, 2002.
B. C. Jeon, S. G. Lee, Y. M. Kim, S. R. Chung, "The Effect of Rainfalll on the Stability of Mudstone Slope in Consideration of Collapse Record", Journal of the Korean Geotechnical Society, vol. 25, no. 2, pp. 55-66, 2009.
G. B. Jeong, "The Study of Engineering Properties of Pohang Mudstone and Strain Behavior", Thesis, Ph. D, Department of Civil Engineering Graduate School Yeungnam University, 2006.
J. C. Gamble, "Durability-plasticity classification of shale and other argillaceous rocks", Thesis, Ph. D, Illinois University, 1971.
Uniform Building Code, UBS Standard no. 29-2, 1968.
A. W. Bishop, G. E. Green, V. K. Garga, A. Andressen, J. D, Brown, "A new ring shear application to the measurement of residual strength", Geotechnique, vol. 21, no. 4, pp. 273-328, 1971.
H. Kim, "Evaluation of Strength Parameter Reduction Rate on Cut Slope Stability Analysis of Mudstone Fracture Zone", Thesis, Department of Civil Engineering Graduate School Joongbu University, 2014.
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.