최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기資源리싸이클링 = Journal of the Korean Institute of Resources Recycling, v.27 no.2, 2018년, pp.38 - 47
김병관 (과학기술연합대학원대학교) , 이수정 (과학기술연합대학원대학교) , 전철민 (한국지질자원연구원 지질환경연구본부) , 최홍식 (충청대학교 도시건설정보과)
Integrated gasification combined cycle (IGCC) is a next generation energy production technology that converts coal into syngas with enhanced power generation efficiency and environmental performance. IGCC produces almost coal gasification slag as the solid by-product. IGCC slag is generated about 14...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
석탄가스화 복합발전이란 무엇인가? | 석탄가스화 복합발전(Integrated gasification combinedcycle, IGCC)은 석탄을 고온/고압의 조건에서 산소나 증기와 반응시켜 수소, 일산화탄소로 구성된 합성가스로 전환시키는 에너지 생산기술이다. IGCC의 핵심 설비인 가스화기는 크게 고정층, 유동층, 분류층 형으로 구분된다1). | |
슬래그의 재활용 방안으로 알칼리활성 시멘트의 가능성이 보고되고 있지만 이를 아직사용할 수 없는 문제는 무엇인가? | 알칼리 자극제로 고농도의 가성소다를 사용하여 알칼리활성 시멘트로의 활용 가능성도 보고된 바 있다10). 그러나 아직 일반화할 수 있는 보편적인 배합비 산정법이 정립되지 않아 원료가 달라지면 자극제의 최적 농도를 다시 시험해야 하는 문제가 있다. 가까운 예로 고로슬래그의 경우에도 알칼리 자극제에 대한 슬래그의 비율과 알칼리의 농도를 정한 후 작업성을 결정하는 경험적배합법(empirical mix design method)15)과 콘크리트의 골재량과 단위수량 등을 정한 후 슬래그와 알칼리 자극제의 함량, 고액비 등을 결정하는 실험적 배합법(experimental design method)15) 모두 여러 경우의 수를 시험하고 최적의 배합비를 선택하는 방식이다. | |
슬래그의 성분은 어떻게 구성되어 있는가? | 한 예로 스페인 Puertollano 발전소의 경우 배출되는 부산물의 약77%가 슬래그, 약 10%는 비산재, 약 7%는 필터케이크, 약 6%는 황으로 알려져 있다5,6). 이 슬래그의 성분을 살펴보면 실리카 약 57%, 알루미나 약 22%, 칼슘산화물 약 9%, 철 산화물 약 5%으로 구성되어 있다7). 슬래그는 성분 원자의 규칙적 배열이 결여된 비정질이기 때문에 비정질 성분의 종류와 함량을 알기 어렵다. |
Krishnamoorthy, V. and Pisupati, S. V., 2015 : A critical review of mineral matter related issues during gasification of coal in fixed, fluidized, and entrained flow gasifiers, Energies, 8(9), pp.10430-10463.
Maurstad, O., 2005 : An overview of Coal based Interg- rated Gasfication Combined Cycle (IGCC) Technology, pp1-3, MIT LFEE, Cambridge.
Descamps, C., Bouallou, C., and Kanniche, M., 2008 : Efficiency of an Integrated Gasification Combined Cycle (IGCC) power plant including $CO_2$ removal, Energy, 33, pp.874-881.
D. An, 2007 : Current status and prospect of Integrated Gasification Combined Cycle (IGCC) business, Journal of Electrical World Monthly Magazine, 370, pp.12-16.
A. Y. Ilyushechkin et al., 2012 : IGCC solids disposal and utilisation, Final Report for ANLEC project 5-0710-0065, pp.66-76, CSIRO, Australia.
Wang, T. and Stiegel, G. J., 2016 : Intergrated Gasficiation Combined Cycle (IGCC) Technologies, Chapter 14, pp463-494, Woodhead Publishing, UK.
Acosta, A. et al., 2001 : Physico-chemical characterization of slag waste coming from GICC thermal power plant, Materials Letters, 50, pp.246-250.
Song, W. et al., 2009 : Fusibility and flow properties of coal ash and slag, Fuel, 88(2), pp.297-304.
Kim, Y., Kim, S. Y., and Chae, T. S., 2017 : Effects of manufacturing conditions on physical properties of integ-rated gasification combined cycle (IGCC) slag geopolymer, Journal of Ceramic Processing Research, 18(3), pp.214- 219.
World Engergy Council, 2016 : Wolrd Energy Resources Coal 2016, pp.12-13, UK.
Choudhry, V. and Hadley, S. R., 1993 : Utilization of coal gasficiation slag: An overview, in Clean Energy from Waste and Coal, ACS symposium series, 515, pp253-263.
Acosta, A. et al., 2002 : Utilisation of IGCC slag and clay steriles in soft mud bricks (by pressing) for use in building bricks manufacturing, Journal of Waste Management, 22, pp.887-891.
Martin, I. I., Echeverria, A. A., and Garcia-Romero, E., 2013 : Recycling of residual IGCC slags and their benefits as degreasers in ceramics, Journal of Environmental Management, 129, pp.1-8.
Shi, C., Roy, D., and Krivenko, P., 2006 : Alkali-activated cements and concretes, chapter 8, pp.220-230, Taylor & Francis group, USA.
Williams, R. P. and Van Riessen, A., 2010 : Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD, Fuel, 89, pp.3683-3692.
Javellana, M. P. and Jawed, I., 1982 : Extration of free lime in portland cement and cliker by ethylene glycol, Cement and Concrete Research, 12, pp.399-403.
Kantro, D. L., 1980 : Influence of water-reducing ad- mixtures on properties of cement paste?a miniature slump test, Cement, Concrete and Aggregates, 2(2), pp.95-102.
Provis, J. L. and Van Deventer, J. S. J., 2009 : Geopolymers structure, processing, properties and industrial applications, Chapter 3, pp37-49, Woodhead Publishing, UK.
Wang, P. Z., Trettin, R., and Rudert, V., 2004 : Effect of fineness and particle size distribution ofgranulated blast-furnace slag on the hydraulic reactivity in cement systems, Advances in Cement Research, 17(4), pp.161-166.
Li, C., Sun, H., and Li, L., 2010 : A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements. Cement and Concrete Research, 40(9), pp.1341-1349.
Kim, H. B. and Oh, M., 2001 : Investigation of corrosion mechanism by analyses of spent chromia refractory from a coal gasifier, Journal of energy engineering, 13(4), pp.281- 290.
Wang, P. and Massoudi, M., 2013 : Slag behavior in gasifiers. Part I: Influence of coal properties and gasi- fication conditions, Energies, 6(2), pp.784-806.
Rida, M. A. and Harb, F., 2014 : Synthesis and characteri- zation of amorphous silica nanoparitcles from aqueous silicates uisng cationic surfactants, Journal of Metals, Materials and Minerals, 24(1), pp.37-42.
Vempati, R. K. et al., 1994 : Fractionation and characteri- zation of Texas lignite class 'F' fly ash by XRD, TGA, FTIR, and SFM, Cmenet and Concrete Research, 24(6), pp.1153-1164.
Li, H. X., Qiu, X. S., and Tang, Y. X., 2008 : Ash melting behavior by Fourier transform infraed spectroscopy, Journal of Chnia University of Mining & Technology, 18, pp.245-249.
Wu, X. R. et al., 2015 : Synthesis, structure characterization and magnetic property of $(Mg_{1-y}Fe_y)(Al_{0.4}Cr_xFe_{1.6-x})O_4$ spinel solid solution, Material Science and Environmental Engineering: Proceedings of the 3rd Annual 2015 ICMSE, pp.109-113, China, 5-6 June 2015, CRC press, US, 2015.
De Bock, L. P. and Van den Bergh, H., 2004 : Stainless steel slags in hydraulic bound mixtures for road con- struction, two case stuides in Belgium, International RILEM Conference on the Use of Recycled Materials in Buildings and Structures, pp.1095-1104, MSEE,
Wang, G., 2010 : Determination of the expansion force of coarse steel slag aggregate, Construction and Building Materials, 24, pp.1961-1966.
Aydilek, A. H., 2015 : Geothecnical and environmental impacts of steel slag use in highway construction, University of Maryland, Final report.
Vaverka, J. and Sakurai, K., 2014 : Quantitative deter- mination of free lime amount in steel making slag by X-ray diffraction. ISIJ International, 54(6), pp.1334-1337.
Van Riessen, A. and Chen-Tan, N., 2013 : Beneficiation of collie fly ash for synthesis of geopolymer Part 2 - Geopolymers, Fuel, 111, pp.829-835.
Johnson, E. B. G. and Arshad, S. E., 2014 : Hydrothermally synthesized zeolites based on kaolinite: A review, Applied Clay Science, 97-98, pp.215-221.
Lee, S. et al., 2016 : Impact of activator type on the immobilisation of lead in fly ash-based geopolymer, Journal of Hazardous Materials, 305, pp.59-66.
Lothenbach, B., Pelletier-Chaignat, L., and Winnefeld, F., 2012 : Stability in the system $CaO-Al_2O_3-H_2O$ , Cement and Concrete Research, 42, pp.1621-1634.
Fernandez-Jimenez, A. and Puertas, F., 2002 : The alkali-silica reaction in alkaliactivated granulated slag mortars with reactive aggregate. Cement and Concrete Research, 32(7), pp.1019-1024.
Shi, C., Roy, D., and Krivenko, P., 2006 : Alkali-activated cements and concretes, Chapter 3, pp.29-63.
Garcia-Lodeiro, I. et al., 2011 : Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram $Na_2O-CaO-Al_2O_3-SiO_2-H_2O$ , Cement and Concrete Reserch, 41, pp.923-931.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.