최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.17 no.3, 2018년, pp.71 - 77
문홍주 (군산대학교 기술혁신센터) , 심기중 (군산대학교 기술혁신센터) , 전남진 ((주) 화신 기술연구소)
This paper suggests how to improve the fatigue strength of an axle shaft, which is the vulnerable part of an axle shaft system for a 3.5-ton commercial vehicle. The axle shaft is composed of a universal joint with a spider and yoke, yoke shaft, and so on. Structural analysis of the initial axle shaf...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
액슬 샤프트의 역할은 무엇인가? | 이러한 구동축의 메커니즘은 적절하게 조화되어야 동력을 효과적으로 구동바퀴까지 전달될 수 있다. 액슬 샤프트(Axle shaft)는 이러한 차량구동계통의 주요 핵심부품중의 하나이며, 전축의 구동력 전달과 조향기능을 담당하고 있다. 상용차의 구동계 있어서는 신뢰성이 취약한 부품으로서 신뢰성 확보를 위한 강도 개선 및 연구가 필요한 제품이기도 하다. | |
상용차의 액슬 샤프트는 어떻게 설계되어야 하는가? | 액슬 샤프트는 상용차의 액슬하우징내에서 차동기어와 구동바퀴내에 결합되어 변속기로 부터의 구동력과 핸들로 부터의 조향을 구동바퀴에 원활하게 전달하도록 설계 되어야 한다. 이에 본 과제 의 액슬 샤프트는 더블카단 형식의 등속조인트와 축으로 구성되며, 더블카단 형식의 등속조인트는 Fig. | |
액슬 샤프트가 상용차의 구동계 있어서 어떤 부품인가? | 액슬 샤프트(Axle shaft)는 이러한 차량구동계통의 주요 핵심부품중의 하나이며, 전축의 구동력 전달과 조향기능을 담당하고 있다. 상용차의 구동계 있어서는 신뢰성이 취약한 부품으로서 신뢰성 확보를 위한 강도 개선 및 연구가 필요한 제품이기도 하다. [1] |
Bayrakceken, H., Tasgetiren, S. and Yavuz, I., " Two Cases of Failure in the Power Transmission System on Vehicles: A Unversal Joint Yoke and a Drive Shaft", Engineering Failure Analysis, Vol. 14, pp. 716-724, 2007
Avrigean, E., Pascu, A. M. and Oleksik, V. S., "Study of the Cardan Cross Using the Experimental and Analytical Method", Proceeding Engineering, Vol. 100, pp. 499-504, 2015.
Oh, B. G., "Strength Analysis of Cross Groove Type Constant Velocity Joint Cage for Propeller Shaft", Transactions of KSAE, Vol. 16, No. 2, pp. 74-79, 2008.
Kweon, S. S., Seo, K. W. and An, H. S., "Improve ment of NVH Performance for Premium Passenger Car Propeller Shaft", KSAE Annual Conference Proceedings, pp. 1345-1339, 2010.
Choi, E. O,, Ahn, B. M., Hong, D. P. and Chung, T. J., "A Study on the Design of Propeller Shaft for Reduction of Torsional Vibration", Transactions of KSAE, Vol. 7, No. 7, pp. 221-228, 1999.
Cho, J. H., Moon, D. J. and Lee, J. SC., "A Study on the CAE analysis of Bed Multi-Tasking Machine for Automotive Power Train Shafts", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 9-14, 2015.
Ahn, S. H., Lam, K. W., Kim, T. I., Lee, M. Y. and Kim, D. K., "A Study on the Mechnical Properties by High-Frequency Induction Hardening of SCM440 Steel," Transactions of KSAE, Vol. 23, No. 2, pp. 74-80, 2009.
Lee, S. J., Jeon, H. Y. and Sung, N. W., " The Study on Estimation of Fatigue Limited in Induction Surface Hardened S45C Steel", Transactions of KSAE, Vol. 6, No. 1, pp. 134-142, 1998.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.