최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기品質經營學會誌 = Journal of Korean society for quality management, v.46 no.2, 2018년, pp.311 - 326
Purpose: Using international specifications, this study classified international standards and automobile manufacturers' test items based on the kind of test used and determined the test order for ISO 16750. Methods: The effects of international standards' environmental factors were examined, based ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
자동차 전장품에 높은 신뢰성이 요구되는 이유는? | 운송 수단에 사용되는 전장품은 사용자의 안전과 직결되어있으므로 높은 수준의 안전성과 신뢰성을 요구한다. 그러나 신뢰성 메커니즘의 한계로 실제 사용조건에 발생하는 고장은 재현 및 방지에 어려움이 존재한다. | |
신뢰성 시험의 환경시험을 순차적 시험으로 실시할 때 이점은 무엇인가? | 그리고 ISO 16750의 시험 순서를 각 제조사와 MIL-STD-810G에 가중치를 부여하여 시험 순서를 제시하였다. 환경시험을 순차적으로 실시함으로써, 필드에서 발생할 고장의 검출력을 높일 수 있을 뿐 아니라 시험 시료 수도 적게 투입할 수 있다. 따라서, 최근 자동차 제조사에서는 단일 시험이 아닌 순차적 시험을 실시하고 있다. | |
전장품 신뢰성 메커니즘의 한계로 존재하는 어려움은? | 운송 수단에 사용되는 전장품은 사용자의 안전과 직결되어있으므로 높은 수준의 안전성과 신뢰성을 요구한다. 그러나 신뢰성 메커니즘의 한계로 실제 사용조건에 발생하는 고장은 재현 및 방지에 어려움이 존재한다. 이를 해결하기 위한 새로운 개념의 신뢰성 시험 메커니즘이 요구된다. |
Ford. 1999. "WDS EA-D11." Environmental requirements-(non-EMC) vehicle electrical and electronic systems.
GM. 2012. "GMW3172." General specification for electrical/electronic components-environmental/durability.
IEC. 2013. "IEC 60068-1." Environmental testing- part 1: general and guidance.
ISO. 2012. "ISO 16750-3." Road vehicles-environmental conditions and testing for electrical and electronic equipment-part3: mechanical loads.
ISO. 2010. "ISO 16450-4." Road vehicles-environmental conditions and testing for electrical and electronic equipment-part4: climatic loads.
ISO. 2010. "ISO 16450-5." Road vehicles-environmental conditions and testing for electrical and electronic equipment-part5: chemical loads.
Kim, J. -G. and Kim, J. -H. 2004. "Highly Accelerated Life Tests for Auto-Connector in Use-Environment." Korea Safety Management & Science Conference, 229-235.
Kim, D., Kim, G., Kang, J., Lee, Y. and Chung, S. (2008). "Evaluation of Contaminant Characteristics for Environmental Durability Test of Automotive Joints and Seals." The Korean Society Of Automotive Engineers Conference, 1265-1270.
Kim, M. H. and Kim, J. R. 2010. "Thermal Environment Test of T-50 Aircraft utilizing the Environmental Test Facility." Journal of The Korean Society for Aeronautical & Space Sciences, 1298-1301.
Lee et al. 2012. "A Study on the Temperature Stabilization Time during Temperature Environmental Test of the Battery System for Green Cars." IEEE Vehicle Power and Propulsion Conference, 1548-1551.
Saarinen, K. and Frisk, L. 2012. "Reliability of UHF RFID Tags in Humid Environments." Electronics Packaging Technology Conference, 180-184.
Sohn, E. -H., Cho, H., Seo, H. -J., Park, S. -W. and Moon, G. -W. 2015. "Space Environment Test Center Operation in Russia." Current Industrial and Technological Trends in Aerospace, 13(1): 71-78.
Volkswagen. 2010. "VW 80000." Electric and electronic components in motor vehicles up to 3.5t-general component requirements, test conditions and tests.
Yang, J. H. 2014. "A Study of the Optimal Environmental Test Sequence for Electrical Units." Department of Industrial Engineering Graduate School, Kyonggi University.
Yang, J. H. and Kim, Y. S. 2014. "A Study on an Environmental Test Sequence for Electrical Units on Aircraft." Journal of the Applied Reliability 14(2):114-121.
Yang, J. Y., Lee S., Kim, T. -U., and Chung S. -J. 2012. "Vibration Test for the Aircraft Landing Gear." Journal of The Korean Society for Aeronautical & Space Sciences, 1534-1538.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.