다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국전산유체공학회지 = Journal of computational fluids engineering, v.23 no.2 = no.81, 2018년, pp.23 - 31
최훈기 (창원대학교 기계공학부) , 유근종 (창원대학교 기계공학부) , 임윤승 (창원대학교 기계공학부)
AI-Helper
A vortex tube is a simple energy separating device which splits a compressed air stream into a cold and hot stream without any external energy supply or chemical reactions. In this article computational fluid dynamics analysis of a 3-D steady state and turbulent flow has been carried out through a v...
1934, Ranque, M.G., "Method and Apparatus for Obtaining from a Fluid Under Pressure Two Currents of Fluid at Different Temperatures," US Patent No. 1952281.
2008, Behera, U., Paul, P.J., Dinesh, K. and Jacob, S., "Numerical investigations on flow behaviour and energy separation in Ranque-Hilsch vortex tub," Int. J. Heat Mass Transfer, Vol.51, pp.6077-6089.
1977, Marshall, J., "Effect of Operating Conditions, Physical Size and Fluid Characteristics on the Gas Separation Performance of a Linderstrom-Lang Vortex Tube," Int. J. Heat Mass Transfer, Vol.20, pp.227-231.
1950, Fulton, C.D., "Ranque's Tube," J. ASRE Refrigerating Engng, Vol.58, pp.473-479.
1966, Alimov, R.Z., "Flow Friction and Heat and Mass Transfer in a Swirled Flow," Journal of Engineering Physics and thermophysics, Vol.10, No.4, pp.251-257.
1997, Ahlborn, B. and Groves, S., "Secondary Flow in a Vortex Tube," Fluid Dynamics Research, Vol.21, pp.73-86.
1982, Kurosaka, M., "Acoustic Streaming in Swirling Flow and the Ranque-Hilsch (Vortex-Tube) Effect," J. Fluid Mech., Vol.124, pp.139-172.
2010, Xue Y., "A Critical Review of Temperature Separation in a Vortex Tube," Exper. Thermal. Fluid. Sci., Vol.34, pp.1367-1374.
2013, Xue Y., Arjomandi M. and Kelso R., "The Working Principle of a Vortex Tube," Int. J. Refrigeration, Vol.36, pp.1730-1740.
1955, Westley, R., "Optimum Design of a Vortex Tube for Achieving Larger Temperature Drop Ratios," Cranfield College Note, Vol.30, College of Aeronautics.
2002, Ting-Quan, M.A., Qing-Guo, Z.H.A.O., Fang, Y.E. and Chong Fang, M.A., "Experimental Investigation on Energy Separation by Vortex Tubes," In 12th International Heat Transfer Conference. Grenoble.
2005, Promvonge, P. and Eiamsard, S., "Investigation on the Vortex Thermal Separation in a Vortex Tube Refrigerator," ScienceAsia, Vol.31, No.3, pp.215-23.
2012, Marquesa, C.H., Isoldia, L.A., dos Santosa, E.D. and Roch, L.A.O., "Constructal Design of a Vortex Tube for Several Inlet Stagnation Pressures," Thermal Engineering, Vol.11, pp.85-92.
2015, Gadhave, A.S. and Kore, S.S., "An Experimental Study on Operating Parameter on Counter flow Vortex Tube," International Journal of Innovative Science, Engineering & Technology, Vol.2, pp.401-405.
2007, Behera, U., Paul, P.J., Dinesh, K. and Jacob, S., "Numerical Investigations on Flow Behaviour and Energy Separation in Ranque-Hilsch Vortex Tube," International Journal of Heat and Mass Transfer, Vol.51, No.25-26, pp.6077-6089.
2008, Oliver, R., "Numerical Prediction of Primary and Secondary Flows in a Ranque Hilsch Vortex Tube," MS Thesis. Dublin Institute of Technology.
2006, Skye, H., Nellis, G. and Klein, S., "Comparison of CFD Analysis to Empirical Data in a Commercial Vortex Tube," International Journal of Refrigeration, Vol.29, No.1, pp.71-80.
2009, Secchiaroli, A., Ricci, R., Montelpare, S. and D'Alessandro, V., "Numerical Simulation of Turbulent Flow in a Ranque-Hilsch Vortex Tube," International Journal of Heat and Mass Transfer, Vol.52, pp.5496-5511.
2018, Fluent, "ANSYS Fluent V.18 User Guide," USA.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.