최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.22 no.3, 2018년, pp.69 - 74
강명수 (세종대학교 건축공학과) , 강만성 (세종대학교 건축공학과) , 이한주 (경북대학교 건설방재공학부) , 임홍재 (경북대학교 건설방재공학부) , 안윤규 (세종대학교 건축공학과)
Fiber-Reinforced Cementitious Composites (FRCCs) have electrical conductivity by inserting reinforced conductive fibers into a cementitious matrix. Such characteristic allows us to utilize FRCCs for crack monitoring of a structure by measuring electrical responses without sensor installation. Howeve...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
광섬유 센서를 이용한 측정법의 장단점은? | 그 중 부착형 센서를 기반으로 하는 기법으로는 광섬유 센서를 이용한 측정법과 압전센서 (Piezoelectric ceramic lead Zirconate Titanate, PZT)를 활용한 측정법이 있다. 광섬유 센서는 저렴한 비용과 다수의 지점을 동시에 측정할 수 있다는 장점을 가지고 있지만, 센서가 물리적 손상에 취약하고, 초기 균열진단에 대한 민감도가 낮다는 단점이 있다(Verstrynge et al., 2014; Kazuro et al. | |
FRCCs의 장점은? | , 2010). 일반적인 FRCCs는 강섬유 보강을 통해 보통의 콘크리트보다 연성과 강성이 뛰어나고(Song and Hwang, 2004), 전도성 섬유보 강으로 인한 전도성을 가지고 있기 때문에 별도의 센서 설치 없이 구조물 건전성 모니터링 용도로 사용가능하다(Chen and Chung, 1993). 특히, 구조물의 응력 집중부에 설치함으로써 효율적으로 균열 검사가 가능하다는 점에서 다양한 대형 콘크리트 구조물의 모니터링에 유용한 방법이다. | |
이미지 기반 균열 검사 기법의 장단점은? | , 2006; Mentni and Hamel, 2006). 대형 콘크리트 구조물의 이미지를 기반으로 하여 균열을 진단하는 기술은 짧은 시간에 넓은 영역을 검사할 수 있다는 장점이 있지만, 고르지 못한 콘크리트의 외부 표면을 손상으로 분류해 오보를 유발할 수있으며, 표면균열만을 검사할 수 있기 때문에 정확한 초기 균열 진단이 어렵다(Koch et al., 2016). |
An Y. K., Sohn H. (2012), Integrated Impedance and Guided Wave based Damage Detection, Mechanical Systems and Signal Processing, Elsevier, 28, 50-62.
Chen P. W., Chung D. D. L. (1993), Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection, Smart Materials and Structures, Elsevier, 2, 22-30.
Gowers K., Millard S. (1999), Measurement of Concrete Resistivity for Assessment of Corrosion, ACI Materials Journal, ACI, 96-M66.
Han B., Ding S., Yu X. (2015), Intrinsic self-sensing concrete and structures, Measurement, Elsevier, 59, 110-128.
Jingyao C., Chung D. D. L. (2004), Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement. Cement and Concrete Research, Elsevier, 34, 481-485.
Kazuro K., Hideaki M., Isamu O., Makoto K., Keiichi N., Yuichi M., Fumio M. (2005), Acoustic emission monitoring of a reinforced concrete structure by applying new fiber-optic sensors, Smart Materials and Structures, Elsevier, 14(3), 52-59.
Kim D. J., Park S. H., Ryu G. S., Koh K. T. (2011), Comparative flexural behavior of hybrid ultra high performance fiber reinforced with different macro fibers, Construction and Building Materials, Elsevier, 25(11), 4144-4155.
Koch C., German Paal S., Rashidi A., Zhu Z., Konig M., Brilakis I. (2016), Achievements and Challenges in Machine Vision-Based Inspection of Large Concrete Structures, Advances in Structural Engineering, SAGE journals, 17, 3-10.
Lataste J. F., Behloul M., Breysse D. (2008), Characterisation of fibers distribution in a steel fiber reinforced concrete with electrical resistivity measurements, NDT & E International, Elsevier 41(8), 638-647.
Lataste J. F., Sirieix C., Breysse D., Frappa M. (2003), Electrical resistivity measurement applied to cracking assessment on reinforced concrete structures in civil engineering, NDT & E International, Elsevier, 36(6), 383-394.
Lecompte D., Vantomme J., Sol H. (2006), Crack detection in a concrete beam using two different camera techniques, Structural Health Monitoring, J-Stage, 5(1), 59-68.
Lee S. J., Sohn H. (2006), Active self-sensing scheme development for structural health monitoring, Smart Materials and Structures, Elsevier, 15, 1734-1746.
Meehan D. G., Wang S., Chung D. D. L. (2010), Electrical resistance based sensing of impact damage in carbon fiber reinforced cement-based materials. Journal of Intelligent Material Systems and Structures, SAGE journals, 21(1), 83-105.
Metni N., Hamel T. (2006), A UAV for bridge inspection: Visual servoing control law with orientation limits, Automation in Construction, Elsevier, 17, 3-10.
Park S. H., Kim D. J., Ryu G. S., Koh K. T. (2011), Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete. Cement and Concrete Composites, Elsevier, 34(2), 172-184.
Song J., Nguyen D. L., Manathamsombat C., KIM D. J. (2015), Effect of fiber volume content on electromechanical behavior of strain-hardening steel-fiber-reinforced cementitious composites. Journal of Composite Materials, SAGE Journals, 49(29), 3621-3634.
Song P. S., Hwang S. (2004), Mechanical properties of high-strength steel fiber-reinforced concrete, Construction and Building Materials, Elsevier, 18, 669-673.
Verstrynge E., Pfeiffer H., Wevers M. (2014), A novel technique for acoustic emission monitoring in civil structures with global fiber optic sensors, Smart Materials and structures, Elsevier, 23(6), 1-9.
Wen S., Chung D. D. L. (2007), Electrical resistance based damage self-sensing in carbon fiber reinforced cement, Carbon, Elsevier, 45(4), 710-716.
Yang Y., Hu Y. (2008), Sensitivity of PZT impedance sensors for damage detection of concrete structures, Sensors, MDPI, 8(1), 327-346.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.