최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Structural monitoring and maintenance, v.5 no.3, 2018년, pp.345 - 361
Babakhani, Behrouz (Department of Civil Engineering, Arak branch, Islamic Azad University) , Rahami, Hossein (School of Engineering Science, College of Engineering, University of Tehran) , Mohammadi, Reza Karami (Department of Civil Engineering, K.N. Toosi, University of Technology)
The set of processes performed to determine the dynamic characteristics of the constructed structures is named experimental modal analysis. Using experimental modal analysis and interpreting its results, structural failure can be assessed and then it would be possible to plan for their repair and ma...
Abel-Ghaffer, A.M. and Housner, G.W. (1978), "Ambient vibration test of suspension bridge", J. Eng. Mech. Div. - ASCE, 104(5), 983-999.
Begg, R.D., Mackenzie, A.C., Dodds, C.J. and Loland, O. (1976), "Structural integrity monitoring using digitalprocessing of vibration signals", Proceedings of the 8th Annual Offshore Technology Conference (OTC),Texas, USA.
Brandt, A. (2011), Noise and Vibration Analysis: Signal Analysis and Experimental Procedures (1st Ed.), JohnWiley & Sons.
Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference (IMAC), USA.
Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output only systems using frequency domain decomposition", J. Smart Mater. Struct., 10, 441- 445.
Brincker, V. (2015), Introduction to operational modal analysis, published John Wiley & Sons, Ltd, United Kingdom
Ewins, D.J. (2000), Modal Testing: Theory, Practice and Application (2nd Ed.), RESEARCH STUDIES PRESS LTD, England
Hanson, D. (2006), "Operational modal analysis and model updating with a cyclostationary input", Ph.D. Thesis, University of New South Wales, Australia.
James, G.H., Crane, T. G. and Laufer, J.P. (1995), "The natural excitation Technique (NexT) for modal parameter extraction from operating structures", J. Anal. Exper. Modal Anal., 10(4), 260-277.
Lopez Aenlle, M., Fernandez, P., Brincker, R. and Fernandez Canteli, A. (2010), "Scaling factor estimation using an optimized mass change strategy", Mech. Syst. Signal Pr., 24(5), 1260-1273.
Magalhaes, F., Cunha, A ., Caetano, E. and Brincker, R. (2010), "Damping estimation using free decays and ambient vibration tests", Mech. Syst. Signal Pr., 24(5), 1274-1290.
Nagarajaiah, S. and Chen, B. (2016), "Output only structural modal identification using matrix pencil method ", Struct. Monit. Maint., 3(4), 395-406.
Providakis, C., Tsistrakis, S., Voutetaki, M., Tsompanakis, Y., Stavroulaki, M., Agadakos, J., Kampianakis, E. and Pentes, G. (2015), "A new damage identification approach based on impedance-type measurements and 2D error statistics ", Struct. Monit. Maint., 2( 4), 319-338.
Saboonchi, H. and Kabir, M. (2016), "Sensor fusion: acoustic emission and strain", Sensor. Actuat. A: Phys., 247(15), 566-578.
Steve, P., Beeby, S. and Ensel, G. (2004), MEMS Mechanical Sensors, Publisher, Artech Print on Demand.
Thomson, W.T. and Dahleh, M.D. (1998), Theory of Vibration with Applications (5th Ed.), Prentice Hall.
Wenzel, H. and Pichler, D. (2005), Ambient Vibration Monitoring (1st Ed.), John Wiley & Sons, Ltd, England.
Young, L.W.C. and Budynas, R. (2002), Roark's Formulas for Stress and Strain , McGraw-Hill.
Zhang, L., Brincker, R. and Andersen, R. (2005), "An overview of operational modal analysis: Major development and issues", Proceedings of the 1st International Operational Modal Analysis Conference (IOMAC), Copenhagen, Denmark, April 26-27.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.