참고문헌 (19)

1. Abel-Ghaffer, A.M. and Housner, G.W. (1978), "Ambient vibration test of suspension bridge", J. Eng. Mech. Div. - ASCE, 104(5), 983-999. 

2. Begg, R.D., Mackenzie, A.C., Dodds, C.J. and Loland, O. (1976), "Structural integrity monitoring using digitalprocessing of vibration signals", Proceedings of the 8th Annual Offshore Technology Conference (OTC),Texas, USA. 

3. Brandt, A. (2011), Noise and Vibration Analysis: Signal Analysis and Experimental Procedures (1st Ed.), JohnWiley & Sons. 

4. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference (IMAC), USA. 

5. Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output only systems using frequency domain decomposition", J. Smart Mater. Struct., 10, 441- 445. 

   상세보기

6. Brincker, V. (2015), Introduction to operational modal analysis, published John Wiley & Sons, Ltd, United Kingdom 

7. Ewins, D.J. (2000), Modal Testing: Theory, Practice and Application (2nd Ed.), RESEARCH STUDIES PRESS LTD, England 

8. Hanson, D. (2006), "Operational modal analysis and model updating with a cyclostationary input", Ph.D. Thesis, University of New South Wales, Australia. 

9. James, G.H., Crane, T. G. and Laufer, J.P. (1995), "The natural excitation Technique (NexT) for modal parameter extraction from operating structures", J. Anal. Exper. Modal Anal., 10(4), 260-277. 

10. Lopez Aenlle, M., Fernandez, P., Brincker, R. and Fernandez Canteli, A. (2010), "Scaling factor estimation using an optimized mass change strategy", Mech. Syst. Signal Pr., 24(5), 1260-1273. 

    상세보기

11. Magalhaes, F., Cunha, A ., Caetano, E. and Brincker, R. (2010), "Damping estimation using free decays and ambient vibration tests", Mech. Syst. Signal Pr., 24(5), 1274-1290. 

    상세보기

12. Nagarajaiah, S. and Chen, B. (2016), "Output only structural modal identification using matrix pencil method ", Struct. Monit. Maint., 3(4), 395-406. 

13. Providakis, C., Tsistrakis, S., Voutetaki, M., Tsompanakis, Y., Stavroulaki, M., Agadakos, J., Kampianakis, E. and Pentes, G. (2015), "A new damage identification approach based on impedance-type measurements and 2D error statistics ", Struct. Monit. Maint., 2( 4), 319-338. 

14. Saboonchi, H. and Kabir, M. (2016), "Sensor fusion: acoustic emission and strain", Sensor. Actuat. A: Phys., 247(15), 566-578. 

    상세보기

15. Steve, P., Beeby, S. and Ensel, G. (2004), MEMS Mechanical Sensors, Publisher, Artech Print on Demand. 

16. Thomson, W.T. and Dahleh, M.D. (1998), Theory of Vibration with Applications (5th Ed.), Prentice Hall. 

17. Wenzel, H. and Pichler, D. (2005), Ambient Vibration Monitoring (1st Ed.), John Wiley & Sons, Ltd, England. 

18. Young, L.W.C. and Budynas, R. (2002), Roark's Formulas for Stress and Strain , McGraw-Hill. 

19. Zhang, L., Brincker, R. and Andersen, R. (2005), "An overview of operational modal analysis: Major development and issues", Proceedings of the 1st International Operational Modal Analysis Conference (IOMAC), Copenhagen, Denmark, April 26-27.