최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.31 no.5, 2018년, pp.246 - 250
이영준 (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) , 이정률 (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) , 홍성진 (Materials & Processes Team, Korea Aerospace Industries, LTD.)
In this paper, laser ultrasonic rotation scanning method was proposed to inspect and visualize defects in corner section of curved composite structure. L-shaped composite specimen with defects in its corner section were inspected using laser ultrasonic rotation scanning method. L-shaped specimens ha...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
주 구조물의 주된 역할은 무엇인가? | 하지만 최근에는 주요 하중을 지지하는 주 구조물(primary structure)의 제작에 복합재가 적용되는 사례가 증가하고 있다[1]. 주 구조물의 주된 역할은 공력 및 관성 하중에 의해 발생하는 인장, 압축, 굽힘 또는 비틀림 하중을 지지하고, 연결된 부 구조물로 하중을 분산시키는 것이다. 그러므로 복합재 주 구조물은 하중을 지지하는 동시에 다른 구조물과의 연결이 용이하도록 대부분 L 또는 T 자 모양의 형태를 띤다[2,3]. | |
항공분야에서 복합재료의 수요가 증가하는 이유는 무엇인가? | 복합재료는 무게 대 강도 및 강성비가 매우 높고 피로와 부식에 대한 저항성이 강해 항공분야에서 그 수요가 갈수록 증가하고 있다. 복합재가 항공기에서 차지하는 비율이 증가함에 따라 복합재료로 만들어지는 구조물의 종류 역시 더욱 다양해지고 있다. | |
위상 배열 초음파 방식을 이용한 모서리 부위 검사를 위해 특수 제작된 탐촉자를 사용할 때의 문제점은 무엇인가? | 위상 배열 초음파 방식을 이용한 모서리 검사 시에는 모서리 부위의 검사만을 위해 특별히 제작된 탐촉자를 필요로 한다 [6,7]. 하지만 이러한 특수 제작된 탐촉자는 평판 검사에는 사용할 수 없을 뿐만 아니라, 모서리의 형상이 크게 달라지는 경우에도 사용이 제한된다. 예를 들어 모서리의 곡률이 탐촉자가 허용하는 범위보다 크거나 작을 경우 사용이 불가하며, 만약 모서리가 완전한 직각이 아닐 경우에도 사용이 제한된다. |
Ishikawa, T., Matsushima, M., and Hayashi, Y., "Comparison of Numerical Analysis of Linear and Post-Buckling Behavior of CFRP T-Stiffeners with Experimental Results," Advanced Composite Materials, vol. 7, no. 3, 1998, pp. 263-283.
Stickler P.B., and Ramulu M., Experimental Study of Composite T-Joints under Tensile and Shear Loading," Advanced Composite Materials, Vol. 15, No. 2, 2006, pp. 193-210.
Nhut, P.T., and Yum, Y.J., "Experimental Investigation of the Effect of Manufacturing and Working Conditions on the Deformation of Laminated Composite Structures," Composites Research, Vol. 26, No. 4, 2013, pp. 265-272.
Habermehl, J., and Lamarre, A., "Ultrasonic Phased Array Tools for Composite Inspection during Maintenance and Manufacturing," Proceeding of the 17th World Conference on Nondestructive Testing, Shanghai, China, Oct. 2008, pp. 25-28.
Xu, N., and Zhou, Z., "Numerical Simulation and Experiment for Inspection of Corner-Shaped Components Using Ultrasonic Phased Array," Ndt & E International, Vol. 63, 2014, pp. 28-34.
Scruby, C.B. and Drain, L.E., Laser Ultrasonics -Techniques and Applications, Adam Hilger, Bristol, UK, 1990.
Paschotta, Rudiger. Field Guide to Laser Pulse Generation. Vol. 14, SPIE Press, Bellingham, 2008.
Dubois, M., and Drake, T.E., Dubois, Marc, and Thomas E. Drak, "Evolution of Industrial Laser-ultrasonic Systems for the Inspection of Composites," Nondestructive Testing and Evaluation, Vol. 26, No. 3-4, 2011, pp. 213-228.
Lee, J.R., Ciang, C.C., Shin, H.J., Park, C.Y., and Yoon, D.J., "Laser Ultrasonic Propagation Imaging Method in the Frequency Domain Based on Wavelet Transformation," Optics and Lasers in Engineering, Vol. 49, No. 1, 2011, pp. 167-175.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.