최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.22 no.6, 2018년, pp.130 - 137
Many constitutive models for concrete have been developed to predict the nonlinear behavior of concrete members considerably. The constitutive model for reinforcing bar that include the tension stiffening effect due to the bond characteristics between steel bars and concrete is being studied but the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반적으로 사용되는 콘크리트의 구성모델은 무엇인가? | 콘크리트의 구성모델은 많은 연구를 통해 부재의 비선형 거동을 합리적으로 예측할 수 있도록 여러 모델이 개발되어 왔고 철근의 구성모델은 철근과 콘크리트의 부착 효과에 따른 인장 강화 현상을 반영한 모델이 연구되고 있지만 완전탄소성이나 이선형 변형도 경화 모델이 일반적으로 사용되고 있다. 코어 벽체로 활용하기 위해 개발하고 있는 복합 PC 패널의 반복가력 실험을 통해 길이 방향 철근의 좌굴에 의해 비선형 거동이 발생하였음을 확인하였다. | |
복합 프리캐스트 콘크리트(이하 PC) 패널이란 무엇인가? | 복합 프리캐스트 콘크리트(이하 PC) 패널은 모듈러 건축물의 콘크리트 코어의 습식 공사를 최소화하여 모듈 적층과 동시에 시공될 수 있도록 고안된 건식 접합 PC 벽체이다. 천장보와 바닥보가 만나는 층간대에서 접합되는 박스형 골조식 모듈의 특징을 살려 복합 PC 패널도 PC 벽체 상하부에 강재보를 설치하여 볼트로 접합될 수 있도록 설계되었으며, 형상 및 소재 구성은 선행연구(Lee and Park, 2017)에 서술하였다. | |
복합 프리캐스트 콘크리트 패널에 대한 선행 연구에서는 어떤 결과를 도출했는가? | 천장보와 바닥보가 만나는 층간대에서 접합되는 박스형 골조식 모듈의 특징을 살려 복합 PC 패널도 PC 벽체 상하부에 강재보를 설치하여 볼트로 접합될 수 있도록 설계되었으며, 형상 및 소재 구성은 선행연구(Lee and Park, 2017)에 서술하였다. 선행연구에서는 철근콘크리트 벽체와 복합 PC 패널의 해석결과를 비교하여 복합 PC 패널의 상세를 보완하였고, 반복 가력 실험을 통해 수직철근의 좌굴 등으로 내력과 항복 이후 거동이 선행연구의 해석결과와 큰 차이가 있음을 확인하였다. 이에 이 연구에서는 실험을 통해 확인된 콘크리트 패널의 비선형 거동을 Abaqus를 통해 해석적으로 모사하기 위해 균열발생 콘크리트에서 철근의 평균 응력과 매입 철근의 좌굴이 고려된 재료 모델을 제시하고 해석결과와 실험결과를 비교하여 제시한 모델의 타당성을 검증하고자 한다. |
ABAQUS(2014), Abaqus Analysis User's Guide 6.14, Dassault Systemes Simulia Corp., Providence, RI, USA
Alfarah, B., Lopez-Almansa, F. and Oller, S.(2017), New methodology for calculating damage variables evolution in plastic damage model for RC structures, Engineering Structures, Elsevier, 132, 70-86.
Bai Y. L., Dai, J. G., Ozbakkaloglu T.(2017), Cyclic stress-strain model incorporating buckling effect for steel reinforcing bars embedded in FRP-confined concrete, Composite Structures, Elsevier, 182, 54-66.
Belarbi, A., and Hsu, T. T. C.(1994), Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete, ACI Structural Journal, ACI, 91(4), 465-474.
Dhakal, R., and Maekawa, K.(2002), Modeling for postyield buckling of reinforcement, Journal of Structural Engineering, ASCE, 128(9), 1139-1147.
Hsu, T. T. C and Mo, Y. L.(2010). Unified theory of concrete structures, 2nd edition, John Wiley & Sons Inc.
Kunnath, S. K., Heo, Y. and Mohle, J. F. (2009), Nonlinear uniaxial material model for reinforcing steel bars, Journal of Structural Engineering, ASCE, 135(4), 335-343.
Lee, S. S., Park, K. S.(2017), Development of hybrid panel with C-shaped steel beam at top and bottom of precast concrete wall, Journal of Korean Society of Steel Construction, KSSC, 29(6), 435-442.
Monti, G., and Nuti, C.(1992), Nonlinear cyclic behavior of reinforcing bars including buckling, Journal of Structural Engineering, ASCE, 118(12), 3268-3284.
Rodriguez, M., Botero, J., and Villa, J.(1999), Cyclic stress-strain behavior of reinforcing steel including effect of buckling, Journal of Structural Engineering, ASCE, 125(6), 605-612.
Saenz, L. P. (1964), Discussion of 'Equation for the stress-strain curve of concrete' by P. Desayi, and S. Krishnan, Journal of the American Concrete Institute, ACI, 61, 1229-1235.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.