최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.21 no.6, 2019년, pp.811 - 823
고엄식 (주식회사 네오시티) , 이상훈 (주식회사 네오시티) , 박종필 (주식회사 네오시티) , 지광습 (고려대학교 공과대학 건축사회환경공학과) , 김창용 (한국건설기술연구원)
Slip form method is applied to many cases of a shaft these days because it is safer, more economical and faster than cast-in-place method. Slip-up height of the method is approximately 2.5 to 4.0 m/day. If the temperature of concrete is outside the range of 10 to 30℃, the effects of changes i...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
슬립폼의 일반적인 시공속도는 어느 정도인가? | 슬립폼의 일반적인 시공속도는 공사시기, 작업환경, 근로자 숙련도, 레미콘 및 자재 운반 등에 따라 다소 차이가 있지만, 보통 2.5~4.0 m/day 정도이다. 본 연구에서 개발한 히팅슬립폼은 저온 콘크리트의 양생 강도를 조기에 발현하고 연속상승 슬립폼의 시공속도를 1일(주 ‧ 야간) 4 m 이상 달성하여 기존 일반 슬립폼 대비 공사 기간 단축과 더불어 경제적인 시공법으로 개발하기 위한 목적이 있다. | |
최근 연속상승 슬립폼 공법이 다수의 현장에서 적용되는 이유는 무엇인가? | 최근에는 수직구 구조물 시공방법으로 현장타설 공법 대비 시공속도가 빠르며, 안전하고 경제적인 연속상승 슬립폼 공법이 다수의 현장에 적용되고 있다. 슬립폼 공법으로 시공 가능한 높이는 2. | |
제작된 히팅 패널이 균일한 콘크리트 양생과 온도 제어 시공이 가능하다는 장점이외에 또 어떤 장점이 있는가? | 본 연구를 통해 제작된 히팅 패널은 콘크리트 벽체의 양생을 면상발열체를 사용하여 균일한 콘크리트의 양생과 온도 제어 시공이 가능하다. 또한, 거푸집에 탈부착이 가능하도록 제작되어 정비가 간편하고 유지관리 비용이 적게 소요되는 장점이 있다(Fig. 2). |
Carino, N.J., Lew, H.S. (2001), "The maturity method : from theory to application", Proceedings of the 2001 Structures Congress & Exposition, American Society of Civil Engineers, Washington D.C, pp. 19.
Kim, J.K., Moon, Y.H., Eo, S.H. (1998). "Compressive strength development of concrete with different curing time and temperature", Cement and Concrete Research, Vol. 28, No. 12, pp. 1761-1773.
Ko, E.S., Shin, Y.W. (2015), "A case study on slip form and PC slab assembly method for vertical shaft of rapid-transit railway", Korean Geo-Environmental Society, Vol. 16, No. 4, pp. 37-41.
Ko, H.B., Yang, E.I., Eum, S.W. (1998), "The effects of curing temperature history on concrete strength development", Korea Concrete Institute, Vol. 10, No. 5, pp. 89-100.
Korea Occupational Safety & Health Agency (2011), KOSHA Guide C-38-2011, Korea, pp. 6.
Korean Agency for Technology and Standards (2008), Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete, Korea, pp. 11.
Min, K.H., Jung, H.C., Yang, J.M., Yoon, Y.S. (2009), "Heat of hydration characteristics on high-performance concrete for large dimensional tunnel linings", Korean Tunnelling and Underground Space Association, Vol. 11, No. 1, pp. 37-45.
Ministry of Land Infrastructure and Transport (2016), Concrete standard specification, Korea, pp. 55-56.
Reichverger, Z., Jaegermann, C. (1980), "Optimal regime in slip form concreting", Materials and Structures, Vol. 13, No. 2, pp. 109-113.
Shin, Y.W., Min, B.H., Nam, J.B., Lee, S.H. (2019), "A study on structural performance of steel brackets in vertical shaft connected to double-deck tunnel", Korean Tunnelling and Underground Space Association, Vol. 21, No. 3, pp. 363-375.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.