최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국결정성장학회지 = Journal of the Korean crystal growth and crystal technology, v.29 no.6, 2019년, pp.308 - 316
오윤석 (한국세라믹기술원 엔지니어링세라믹센터) , 채정민 (한국세라믹기술원 엔지니어링세라믹센터) , 류호림 (한국세라믹기술원 엔지니어링세라믹센터) , 한윤수 (한국세라믹기술원 엔지니어링세라믹센터) , 안종기 (한화에어로스페이스 항공우주연구소 가스터빈개발팀) , 손명숙 (한화에어로스페이스 항공우주연구소 가스터빈개발팀) , 김홍규 (국방과학연구소)
Electron beam physical vapor deposition (EBPVD) is a conventional method to fabricate thermal barrier coating (TBC) of high temperature airfoil engine parts, such as blade etc. for its high temperature structural stability from the nature of columnar growth behavior. For the high quality of TBC by E...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
열차폐 코팅기술이 개발된 이유는? | 항공기 엔진부품의 고온작동영역에 적용되어 내열금속으로 제조된 고온부품들의 성능과 수명의 요구수준을 확보하기 위한 보호코팅으로서 세라믹 소재기반의 열차폐 코팅기술이 개발되어 왔다. 항공용 엔진의 경우, 발전용 터빈과 다르게 급속가열과 냉각이 반복되는 작동환경으로서 보다 높은 소재의 열피로 내구성능이 요구된다. | |
전자빔을 이용한 물리기상증착 기술이 개발 된 이유는? | 항공용 엔진의 경우, 발전용 터빈과 다르게 급속가열과 냉각이 반복되는 작동환경으로서 보다 높은 소재의 열피로 내구성능이 요구된다. 이와 같은 열피로 내구성능은 열변형성과 직접적인 연관이 있으며, 코팅이 적용된 부품의 경우 특히 수평방향으로의 응력집중에 대한 높은 저항성을 갖는 구조가 필요하게 된다. 이와 같은 고온 열피로 저항성 구조를 형성할 수 있는 코팅기술로서 전자빔을 이용한 물리기상증착 기술이 개발되었다. | |
전자빔 물리기상증착기술이란? | 전자빔 물리기상증착기술(EBPVD)은 주상형 성장거동과 같이 고온에서의 구조 안정성에 기여할 수 있는 특성으로 인해 터빈블레이드 등과 같은 항공기 엔진 고온부품의 열차폐 코팅(TBC) 제조기술로 개발되어 상용화된 기술이다. 전자빔 증착으로 열·기계적 특성이 상용화 가능한 수준에 만족하는 고품질 열차폐 코팅제조를 위해서는 성장거동, 균일두께형성 등과 같은 구조적 요소의 제어가 반드시 수반되어야 한다. |
R.T. Wu, M. Osawa, T. Yokokawa, K. Kawagishi and H. Harada, "Degradation mechanisms of an advanced jet engine service-retired TBC component", J. of Solid Mechanics and Materials Engineering 4 (2010) 119.
R.A. Miller, "Thermal barrier coatings for aircraft engines history and directions", J. Therm. Spray Technol. 6 (1997) 35.
E. Lugscheider, C. Barimani and G. Dopper, "Ceramic thermal barrier coatings deposited with the electron beam-physical vapour deposition technique", Surf. Coat. Technol. 98 (1998) 1221.
U. Schulz, K. Fritscher and M. Peters, "EB-PVD $Y_2O_3$ - and $CeO_2Y_2O_3$ -stabilized zirconia thermal barrier coatings-crystal habit and phase composition", Surf. Coat. Technol. 82 (1996) 259.
U. Schulz, "Phase transformation in EB-PVD yttria partially stabilized zirconia thermal barrier coatings during annealing", J. Am. Ceram. Soc. 83 (2000) 904.
J.R. Nicholls, K.J. Lawson, A. Johnstone and D.S. Rickerby, "Methods to reduce the thermal conductivity of EB-PVD TBCs", Surf. Coat. Technol. 151-152 (2002) 383.
J. Singh and D.E. Wolfe, "Architecture of thermal barrier coatings produced by electron beam-physical vapor deposition (EB-PVD)", J. Mater. Sci. 37 (2002) 3261.
B.K. Jang and H. Matsubara, "Influence of rotation speed on microstructure and thermal conductivity of nanoporous zirconia layers fabricated by EB-PVD", Scr. Mater. 52 (2005) 553.
M. Matsumoto, K. Wada, N. Yamaguchi, T. Kato and H. Matsubara, "Effects of substrate rotation speed during deposition on the thermal cycle life of thermal barrier coatings fabricated by electron beam physical vapor deposition", Surf. Coat. Technol. 202 (2008) 3507.
K. Wada, N. Yamaguchi and H. Matsubara, "Effect of substrate rotation on texture evolution in $ZrO_2$ -4 mol.% $Y_2O_3$ layers fabricated by EB-PVD", Surf. Coat. Technol. 191 (2005) 367.
U. Schulz, K. Fritscher, C. Leyens and M. Peters, "Influence of processing on microstructure and performance of electron beam physical vapor deposition (EB-PVD) thermal barrier coatings", J. Eng. Gas Turbines Power 124 (2002) 229.
U. Schulz, S.G. Terry and C.G. Levi, "Microstructure and texture of EB-PVD TBCs grown under different rotation modes", Mater. Sci. Eng. A360 (2003) 3199.
A. Flores Renteria, B. Saruhan, U. Schulz, H.-J. Raetzer-Scheibe, J. Haug and A. Wiedenmann, "Effect of morphology on thermal conductivity of EB-PVD PYSZ TBCs", Surf. Coat. Technol. 201 (2006) 2611.
U. Schulz, S.G. Terry and C.G. Levi, "Microstructure and texture of EB-PVD TBCs grown under different rotation modes", Mater. Sci. Eng. A360 (2003) 319.
Y. Tamarin, "Protective Coatings for Turbine Blades", 1st ed., Y. Tamarin, Ed. (ASM International, Ohio, 2002) p. 161.
U. Schulz, H.J. Ratzer-Scheibe, B. Saruhan and A.F. Renteria, "Thermal conductivity issues of EB-PVD thermal barrier coatings," Mat.-wiss. u. Werkstofftech. 38 (2007) 659.
M. Ohring, "Materials Science of Thin Films", 2nd ed. (Academic Press, San Diego, 2002) p. 106.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.