최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.35 no.12, 2019년, pp.123 - 134
박민철 (고려대학교 건축사회환경공학부) , 이종섭 (고려대학교 건축사회환경공학부) , 김동호 (고려대학교 건축사회환경공학부) , 유정동 (고려대학교 건축사회환경공학과)
This study presents dynamic responses of circular pipe models as a part of fundamental studies on dynamic stability monitoring of the large circular steel pipe cofferdam with the ship collision. Small-scaled laboratory experiments are performed with a single and bolted circular steel pipes with a di...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국토교통부에 따르면 2015년 기준 국내의 해상교량은 몇개인가? | 국내에서도 육지와 섬을 연결하거나 섬과 섬을 연결하기 위한 교통로를 확보하기 위한 초장대 해상 교량의 건설이 활 발히 이루어지고 있다. 국토교통부에 따르면 2015년 기준 국내의 해상교량은 95개이며, 이 중 56개교가 운영 중에 있고 39개교가 건설 중 또는 계획 중에 있다. 하지만, 해상 교량의 기초 공사에는 잭업 바지, 가이드 프레임, 지그 자켓과 같은 해상 작업대, 시공장비 및 자재 운반을 위한 가설도로, 그리고 시트파일, 영구케이싱, PC 하우스, 벽강관말뚝과 같은 가물막이 부대공 등의 공정 이 복잡하고 작업 난이도가 높은 과정이 필요하다(KICT, 2015). | |
해상 교량의 기초 공사에 적용되는 복잡한 공정과 공사 난이도를 완화하고 공기와 공사비를 줄일 수 있는 경쟁력 있는 기술 확보를 위한 공법를 위해 한국기술연구원이 제안한 것은 무엇인가? | 한국건설기술연구원(KICT, 2015)은 2015년에 해상 교량 기초 공사에 사용되는 기존 해상 작업대와 재래식 가물막이 공법의 복합적인 문제 해결을 위해 공사비, 공사 난이도, 공기, 안정성, 그리고 품질을 개선한 ‘해상교량기초용 대형원형강관 가설공법’을 제안하였다. ‘해상 교량 기초용 대형원형강관 가설공법’의 시공은 다음과 같이 이루어진다(Fig. | |
해상 교량의 기초 공사의 주요 공정은 무엇인가? | 국토교통부에 따르면 2015년 기준 국내의 해상교량은 95개이며, 이 중 56개교가 운영 중에 있고 39개교가 건설 중 또는 계획 중에 있다. 하지만, 해상 교량의 기초 공사에는 잭업 바지, 가이드 프레임, 지그 자켓과 같은 해상 작업대, 시공장비 및 자재 운반을 위한 가설도로, 그리고 시트파일, 영구케이싱, PC 하우스, 벽강관말뚝과 같은 가물막이 부대공 등의 공정 이 복잡하고 작업 난이도가 높은 과정이 필요하다(KICT, 2015). 이로 인해 해상 교량의 기초 공사는 육상 교량보다 약 2~3배 높은 공사 기간과 비용이 소요되며, 하부 구조의 공사비는 전체 공사비의 평균 30%에 이른다. |
Bae, Y.G. and Lee, S.L. (2008), "Analysis of Ship Collision Behavior of Pile Supported Structure", Journal of Korean Society of Civil Engineers, Vol.28, No.3A, pp.323-330 (in Korean).
Cho, H.H. (2009). Probability Analysis of Ship-Bridge Collision Using Ship Maneuvering Simulation, Ph.D. Dissertation, Seoul National University, Korea (in Korean).
Choi, J.O. and Kim, H.J. (2018), "Stability Analysis of Large Circular Cofferdam Using Suction", KSCE 2018 Convention (Conference and Civil Expo), Korean Society of Civil Engineers, Gyeongju, Korea, pp.120-121 (in Korean).
Grandt, A. F. (2004), Fundamentals of Structural Integrity: Damage Tolerant Design and Nondestructive Evaluation. John Wiley & Sons, Inc., NJ.
Jeong, Y.J, Kim, J.S., Park, M.S., and Song, S.H. (2017), "Wave and Current-Induced Structural Behavior of Large Circular Marine Structure", KSCE 2017 Convention (Conference and Civil Expo), Korean Society of Civil Engineers, Busan, Korea, pp.1012-1013 (in Korean).
KICT, Korea Institute of Civil Engineering and Building Technology (2015), Planning Research on Development of Marine Bridge Foundation Large Circular Steel Pile Construction Method, Final Report 14RDPP-C090994-01, Korea Agency for Infrastructure Technology Advancement, 268p (in Korean).
Kim, Y.J. and Kim, H.S. (2016), "Construction Technology of Super Long Span Bridge", Review of Architecture and Building Science, Vol.60, No.5, pp.43-47 (in Korean).
Kim, J., Park, M.S., Jeong, Y.J., and Song, S. (2017), "Numerical Study on the Motion of a Large Marine Temporary Structure Using Submerged Cables under Construction", KSCE 2017 Convention (Conference and Civil Expo), Korean Society of Civil Engineers, Busan, Korea, pp.275-276 (in Korean).
Lee, G.H. and Hong, G.Y. (2011). "A Study for the Evaluation of Ship Collision Forces for the design of Bridge Pier", Journal of Korean Society of Civil Engineers, Vol.31, No.3A, pp.199-206 (in Korean).
Lee, J.H., Cho, J.W., and Kim, H.M. (2017), "Installation Method of Large Circular Steel Pipe Using Suction Pressure", KSCE 2017 Convention (Conference and Civil Expo), Korean Society of Civil Engineers, Busan, Korea, pp.13-14 (in Korean).
Lee, M.J., Choi, S.K., Choo, H.W., Cho, Y.S., and Lee, W.J. (2008), "Uniformity of Large Gypsum-Cemented Specimens Fabricated by Air Pluviation Method", Journal of the Korean Geotechnical Society, Vol.24, No.1, pp.91-99 (in Korean).
Manen, S.E. and Frandsen, A.G. (1998), "Ship Collision with Bridges, Review of Accidents", Proceedings of the International Symposium on Advances in Ship Collision Analysis, Denmark, pp. 3-11.
Santamarina, J.C., Klein, K.A., and Fam, M.A. (2001), Soils and Waves. John Wiley & Sons, 351 Inc., NJ.
Ssenyondo, V., Tran, V.A., and Kim, S.R. (2017), "Numerical Investigation on Seepage Stability in Offshore Bucket Cut-Off Walls", Journal of the Korean Geotechnical Society, Vol.33, No.11, pp.73-82 (in Korean).
Unnporsson, R. (2013), Hit Detection and Determination in AE Bursts. In: Wojciech Sikorski (ed.) Acoustic Emission: Research and Aapplications. InTech Publishers.
Wang, L., Yang, L., Huang, D., Zhang, Z., and Chen, G. (2008), "An Impact Dynamics Analysis on a New Crashworthy Device against Ship-Bridge Collision", International Journal of Impact Engineering, Vol.35, No.8, pp.895-904.
Yun, H., Nayeri, R., Tasbihgoo, F., Wahbeh, M., Caffrey, J., Wolfe, R., Nigbor, R., Masri, S.F., Abdel-Ghaffar, A., and Sheng, L.H. (2008), "Monitoring the Collision of a Cargo Ship with the Vincent Thomas Bridge", Structural Control and Health Monitoring, Vol. 15, No.2, pp.183-206.
Zheng, Q., Han, B., and Ou, J. (2018), "Ship-Bridge Collision Monitoring System Based on Flexible Quantum Tunneling Composite with Cushioning Capability", Smart Materials and Structures, Vol. 27, No.7, pp.1-9.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.