최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산업융합학회 논문집 = Journal of the Korean Society of Industry Convergence, v.22 no.6, 2019년, pp.649 - 655
윤서현 (부경대학교 마린융합디자인협동) , 김민헌 (부경대학교 마린융합디자인협동) , 남기우 (부경대학교 재료공학과)
Fracture behaviors of SCM435 high strength bolt have been studied including macroscopic and microscopic fracture observation, Energy Dispersive X-ray Spectroscopy, Vickers hardness test and applied stress evaluation. cracks (ratchet marks) were generated by the repetitive loads acting on the bolts, ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
볼트는 어디에 주로 사용되는가 | 볼트는 산업 구조물의 체결에서 가장 일반적으로 사용되는 것이며, 국가의 산업 확대로 인하여수요가 빠르게 증가하고 있다. 볼트 체결에서 파손의 형태는 과부하, 잠금 장치의 풀림, 금속 피로, 부적절한 토-크, 부식 손상 및 수소 취화 등이다. | |
볼트 체결에서 파손의 형태는 무엇이 있는가 | 볼트는 산업 구조물의 체결에서 가장 일반적으로 사용되는 것이며, 국가의 산업 확대로 인하여수요가 빠르게 증가하고 있다. 볼트 체결에서 파손의 형태는 과부하, 잠금 장치의 풀림, 금속 피로, 부적절한 토-크, 부식 손상 및 수소 취화 등이다. 진동 환경에 노출되는 기기는 일반적으로 잠금 장치를 갖춘다. | |
볼트 체결 시 중요한 요소는 무엇인가 | 진동 환경에 노출되는 기기는 일반적으로 잠금 장치를 갖춘다. 나사형 체결장치가 사용되면, 조임 또는 볼트 토-크의 양은 매우 중요하다. 부적절한 토-크로 인하여 구조물에서 고장이 종종 발생한다. |
R. E. Melchers, A. T. Beck, "Structural Reliability Analysis and Prediction, "John Wiley & Sons, 2017.
R. G. Baggerly, "Hydrogen-assisted stress cracking of high-strength wheel bolts," Engineering Failure Analysis, vol. 3, pp. 231-240 (1996).
M. T. Milan, D. Spinelli, W. W. Bose Filho, M. F. V. Montezuma, V. Tita, "Failure analysis of a SAE 4340 steel locking bolt," Engineering Failure Analysis, vol. 11, pp. 915-924, (2004).
C. C. Li, "Performance of D-bolts Under Static Loading," Rock Mechanics and Rock Engineering, vol. 45, pp. 183-192, (2012).
E. L. Grimsmo, A. Aalberg, M. Langseth and A. H. Clausen, "Failure modes of bolt and nut assemblies under tensile loading," Journal of Constructional Steel Research, vol. 126, pp. 15-25, (2016).
M. Han, J. C, "The Analysis of Fatigue Damage in Structure under Variable Load, "Transactions of KSAE, vol. 12, pp. 85-93, (2004).
K. W. Nam, C. S. Kim and S. H. Ahn, "A study on wear damage of SKD11 steel material for a cutting mold jig," Journal of the Korean Society for Power System Engineering, vol. 20, no. 5, pp. 5-13, (2016).
W. T. Becker and R. J. Shipley, "Failure Analysis and Prevention - Fatigue Failures," ASM International, vol. 11, pp. 700-727, (2002).
K. Ando, R. Fueki, K. W. Nam, K. Matsui and K. Takahashi, "A Study on the Unification of the Threshold Stress Intensity Factor for Micro Crack Growth, "Japan Society of Spring Engineers, vol. 64, pp. 39-44, (2019).
S. Takagi, N. Nakamura, A. Sano and Y. Tonozuka, "Fatigue Strength Property of Nitrided JIS-SCM435 Steel," Research Report of Kanagawa Institute of Industrial Science and Technology, no.19, pp 6-9, (2013).
M. S. Suh, C. M. Suh and Y. S. Pyun, YUN, "Very high cycle fatigue characteristics of a chromemolybdenum steel treated by ultrasonic nanocrystal surface modification technique," Fatigue & Fracture of Engineering Materials & Structures, vol. 36, no. 8, pp 769-778, (2013).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.