최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기드라이브ㆍ컨트롤 = Journal of drive and control, v.16 no.1, 2019년, pp.14 - 21
최성웅 (Department of Construction Machinery Engineering, University of Ulsan) , 이창돈 (Defence Systems Division, Research and Development 1 Team, Doosan Corporation) , 양순용 (Department of Mechanical Engineering, University of Ulsan)
Axial piston pump is a significant part in wheeled armored vehicle, for generating hydraulic power of vehicle power system. The Axial Piston Pump is a high-performer, core functional item that is developed and applied to most of the military models in the development of military weapon systems. Howe...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
액시얼 피스톤 펌프란 무엇인가? | 차륜형 장갑차에 적용되는 액시얼 피스톤 펌프는 차체 동력장치의 오일냉각을 위해 소요되는 유압 동력을 발생시키는 핵심구성품으로 운용요구조건과 사용 환경에 따라 장비에서 요구되는 크기와 중량 조건에서 최적의 출력과 성능검증을 요구한다. | |
액시얼 피스톤 펌프가 수급이 어려운 이유는? | 핵심구성품 중 액시얼 피스톤 펌프의 경우 해외에서 수입하여 적용하고 있으나 차륜형 장갑차의 장비 특성상 해외에서 소량으로 수급하기 때문에 가격이 비싸고 안정적인 적기에 수급이 어렵다. | |
차륜형 장갑차의 핵심기능품목의 경우 국산화 개발이 필요한 이유는? | 핵심구성품 중 액시얼 피스톤 펌프의 경우 해외에서 수입하여 적용하고 있으나 차륜형 장갑차의 장비 특성상 해외에서 소량으로 수급하기 때문에 가격이 비싸고 안정적인 적기에 수급이 어렵다. 또한, 완성품을 해외에서 수입 시 운용 중 발생되는 기능저하와 같은 문제로 인해 적기에 대응이 어렵고 최적의 장비 운용이 어렵게 된다. 따라서, 차륜형 장갑차의 핵심기능품목의 경우 국산화 개발과 독자기술력을 확보할 필요가 있다. |
S. R. Choi, S. S. Shin, I. Y. Lee, D. H. Jang and J. H. Kwon, "A Basic Study on Pressure & Flow Ripple Simulation of Axial Piston Pump", Proceedings of the KFPS 2010 Autumn Conference, pp.57-62, 2010.
I. Y. Lee, J. H. Park and M. G. Kang, "Flow Ripple Simulation Model of Axial Piston Pump," Journal of Drive and Control, Vol.2, No.3, pp. 54-59, 2005.
D. H. Jang, S. K. Lee, J. H. Kwon and S. H. Park, "A Study on Pressure, Flow Fluctuation and Noise in the Cylinder of Swash Plate Type Axial Piston Pump," Journal of Drive and Control, Vol.6, No.3, pp.38-46, 2009.
M. Galal Rabie, Fluid Power Engineering, McGraw-Hill, New York, pp.103-105, 2009.
J. H. Bae, W. J. Chung, J. H. Jang, Y. H. Yoon, J. Y. Jeon, "Study of Pressure and Flux Pulsation to Design Optimum Valve-Plate Notch and Pulsation-Variables Analysis of Swash-Plate-Type Piston Pump", Journal of the Korean Society of Manufacturing Technology Engineers, Vol.24, No.2, pp.244-250, 2015.
J. Ivantysyn and M. Ivantysynova, Hydrostatic Pumps and Motors, Tech Books International, New Delhi, pp.123, 2003.
Y. H. Yoon, J. S. Jang, Y. B. Lee, "An Analysis of Dynamic Characteristics for Variable Swash Plate Type Axial Piston Pump", Proceedings of the KSFC 2012 Spring Conference, pp.23-30, 2012.
S. W. Choi, Q. H. Le, S. J. Kim and S. Y. Yang, "Analysis of flow characteristics according to the tilting angle of the variable swash plate type piston pump for power transmission device," Proceedings of 2017 Autumn Conference on Drive and Control, pp. 40-41, 2017.
S. S. Park et al., "Development of a Concrete Pump Truck's Core Pump Model and Its Validation", Journal of Drive and Control, Vol.15, No.2, pp.1-8, 2018.
D. S. Jung, Y. B. Lee and B. S. Kang, "Study for the Reliability Evaluation of a Volute Pump", Journal of Drive and Control, Vol.15, No.4, pp.23-29, 2018.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.