최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국재료학회지 = Korean journal of materials research, v.29 no.3, 2019년, pp.160 - 166
This study investigates the effect of thermo-mechanical treatment on the damping capacity of the Fe-20Mn-12Cr-3Ni-3Si alloy with deformation induced martensite transformation. Dislocation,
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소음과 진동에 대한 규제가 강화되는 배경은 무엇인가 | 소음과 진동은 다양한 형태의 인적 및 물적 손실을 초래하고 있기 때문에 이에 대한 규제가 갈수록 강화되어 가고 있다. 뿐만 아니라 생활 및 노동환경의 개선, 기기 또는 장치 등의 안정성과 장수명화 등을 위해서도 소음과 진동의 저, 감에 대한 필요성이 높아가고 있다. | |
최근 관심이 높아지는 소음과 진동 방지법은 무엇인가 | 현재 공업적으로 이용되고 있는 소음과 진동 방지법은 여러 방법이 있지만 최근에는 가공성과 강도가 높고, 내부마찰계수가 큰 오스테나이트 조직이 가공에 의해 마르텐사이트로 변태하는 가공유기 마르텐사이트 변태를 일 으키는 합금을 소음과 진동원에 적용하여 직접 감쇠하는 재료감쇠(material damping)법이 그 효과가 뛰어나고, 설치 등이 용이하여 이에 대한 관심이 높고, 많은 연구 들이 수행되어 왔다. 1-5) | |
가공열처리한 시료의 감쇠능에 영향을 미치는 요소는 무엇인가 | 10은 가공열처리한 시료의 감쇠능에 미치는 가공 열처리에 의해 생성된 마르텐사이트 조직의 영향을 조사하기 이하여 사이클 수를 달리하여 가공열처리 한 시료의 감쇠능과 가공열처리에 의해 생성된 ε-마르텐사이 트와의 관계를 조사하여 나타낸 것이다. ε-마르텐사이트의 양이 증가함에 따라 감쇠능은 감소하고, 이러한 결과는 가공유기 마르텐사이트 변태를 갖는 316 L 스테인 리스강 등에서 감쇠능에 미치는 미세조직의 영향을 연구한 결과와 15) 다른 것을 알 수 있다. |
Bliznuk, V.V, Glavatska, N.I, Söderberg, O, Lindroos, V.K. Effect of nitrogen on damping, mechanical and corrosive properties of Fe–Mn alloys. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.338, no.1, 213-218.
Jun, Joong-Hwan, Ha, Tae-Joong, Choi, Chong-Sool. The effect of deformation on microstructure and damping capacity in a Co-Ni alloy. Scripta materialia, vol.43, no.7, 603-608.
Huang, S.K., Li, N., Wen, Y.H., Teng, J., Ding, S., Xu, Y.G.. Effect of Si and Cr on stacking fault probability and damping capacity of Fe–Mn alloy. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.479, no.1, 223-228.
Kim, G.H., Nishimura, Y., Watanabe, Y., Sato, H., Nishino, Y., Jung, H.R., Kang, C.Y., Kim, I.S.. Effects of ɛ-martensite and dislocations behavior by thermo-mechanical treatment on Fe–Cr–Mn damping alloy. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.521, 368-371.
Kang, Chang-Yong, Lee, Jong-Young, Kim, Jae-Nam. Effect of Thermo-mechanical Treatment on the Damping Capacity of 316L Stainless Steel. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.53, no.12, 919-930.
Okada, Hiroyuki, Sahashi, Hideo, Igata, Naohiro, Miyahara, Kazuya. Effects of ε martensite and nitrogen on the damping property of high strength Fe–Cr–Mn alloys. Journal of alloys and compounds, vol.355, no.1, 17-21.
Okada, Hiroyuki, Sahashi, Hideo, Kim, Ick-Soo, Kang, Chang-Yong, Igata, Naohiro, Miyahara, Kazuya. Effect of epsilon martensite on the damping of high strength Fe–Cr–Mn alloys. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.370, no.1, 519-523.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.