최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓造船學會 論文集 = Journal of the society of naval architects of korea, v.56 no.2, 2019년, pp.175 - 186
이재환 (충남대학교 선박해양공학과) , 박병재 (한국해양과학기술원 부설 선박해양플랜트연구소)
Number of studies on the buckling of thin cylindrical pressure vessels, such as submarine pressure hull and pipe with a large ratio of diameter/thickness, have been carried out in the naval and ocean engineering. However, research about thick cylinder pressure vessel has not been active except for t...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
해양플랜트산업에서 압력용기란 무엇을 말하는가? | 해양플랜트산업에서, 외부 압력 (외압) 혹은 내부 압력 (내압) 을 받는 내압기기(pressure vessel)인 압력용기는, 강 파이프 (튜브)가 대부분이고 일부 계측장비를 탑재한 압력용기가 있다. 큰 수압의 해저에서 사용되는 제품의 특성상 고가, 소량, 기술집 약적이며, 파이프에 관한 국외의 규정들(ASME, API등)이 있다. | |
본문에서 내압을 받는 얇은 압력용기는 주로 무엇인가? | 내압을 받는 얇은 압력용기는 보일러가 많으며, 실린더에 발생하는 응력을 기준으로 한 ASME BPVC 코드의 선형설계가 보편화되어 있다. 외압을 받는 경우의 실린더는 좌굴의 영향을 받을 수 있어서, 외압에 견딜 수 있는 하중을 예측해야 한다. | |
해양플랜트산업에서 압력용기의 특징은 무엇인가? | 해양플랜트산업에서, 외부 압력 (외압) 혹은 내부 압력 (내압) 을 받는 내압기기(pressure vessel)인 압력용기는, 강 파이프 (튜브)가 대부분이고 일부 계측장비를 탑재한 압력용기가 있다. 큰 수압의 해저에서 사용되는 제품의 특성상 고가, 소량, 기술집 약적이며, 파이프에 관한 국외의 규정들(ASME, API등)이 있다. 해양용 파이프는 직경/두께의 비율이 20 이상이 많아, 비율이 20 이하인 두꺼운 용기에 속하지는 않고, 얇은 용기도 아닌 중간 정도이다. |
ASME BPVC (Boiler and Pressure Vessel Code) 2010. Section VIII, Division 1; Rules for Construction of Pressure Vessels.
Bickell M., & Ruiz, B. C., 1967. Pressure Vessel Design and Analysis, Macmillan Education.
Choi, H-J. Lee, J-H., Kim, J-M., Lee, S-G., & Maring, K., 2016. The Design, Structural Analysis and High Pressure Chamber Test of a Thick Pressure Cylinder for 2000 m Water Depth. Journal of the Society of Naval Architects of Korea, 53(2), pp.144-153.
Corradi, L., Cammi, A., & Luzzi, L., 2011. Collapse Behavior of Moderately Thick Tubes Pressurized from Outside. Nuclear Power - Control, Reliability and Human Factors, Chapter 14, pp.257-274.
Corradi, L.., Marcell, V.D., Luzzi, L., & Trudi, F., 2009. A numerical assessment of the load bearing capacity of externally pressurized moderately thick tubes. International Journal of Pressure vessels and Piping, 86, pp.525-532.
Harvey, J.F., 1991. Theory and Design of Pressure Vessels. Van Nostrand Reinhold.
Kardomateas, G.A., 1993. Buckling of thick orthotropic cylindrical shells under external pressure. Journal of Applied Mechanics-Transactions of ASME 60, pp.195-202.
Kardomateas, G.A., 2000. Effect of normal strains in buckling of thick orthotropic shells. Journal of Aerospace Engineering, 13(3), pp.85-91.
Kardomateas, G.A., & Philobos, M.S., 1995. Buckling of thick orthotropic cylindrical shells under combined external pressure and axial compression. AIAA., 33(10), pp.1946-1953.
Kim, H., Shin, Y., Kim, S., Shin S., Chung, B., Jo, J., & Kim, H., 2012. Structural design of small submarine pressure hull. Journal of the Society of Naval Architects of Korea, 49(2), pp.116-123.
Koiter, W.T., 1960. General theorems of elastic plastic solids mechanics, 1, North-Holland, Amsterdam, pp.65-221.
Marin J., & Weng, T-L, 1963, Strength of thick-walled cylindrical pressure vessels. Journal of Engineering for Industry, Nov. pp.405-415.
Nho, I., Ryu, J., Lim., S.., Cho, S., & Cho, Y., 2017. Buckling analysis of circular cylinders with initial imperfection subjected to hydraulic pressure. Journal of the Society of Naval Architects of Korea, 54(3), pp.267-273.
Papadakis, G. 2008. Buckling of thick cylindrical shells under external pressure. International Journal of Solids and Structures, 45, pp.5308-5321.
Ross, C.T.F., 1990, Pressure vessels under external pressure: statics and dynamics, Elsevier Applied Science.
Sadowski A.J. & Rotter, J.M., 2013. Solid or shell finite elements to model thick cylindrical tubes and shells under global bending. International Journal of Mechanical Sciences, 74, pp.143-153.
Simonen, F.A. & Shippell, R..J. Jr., 1982. Collapse of thick-walled cylinders under external pressure. Experimental Mechanics, pp.41-48.
Timoshenko, S.P., & Gere, J.M., 1961. Theory of elastic stability. McGraw-Hill Book Company.
Voyiadjis, G.Z., & Baluch, M.H., 1981. Refined theory for flexural motions of isotropic elastic plates. Journal of Sound and Vibration. 76(1), pp.57-64.
Voyiadjis, G.Z., & Shi, G., 1991. A refined two-dimensional theory for thick cylindrical shells. International Journal of Solids and Structures. 27(3), pp.261-282.
Voyiadjis, G.Z., & Woelke, P., 2004. A refined theory for thick spherical shells. International Journal of Solids and Structures. 41, pp.3747-3769.
Yoo, Y., Huh, N., Choi, Su., Kim, T., & Kim, J., 2010. Collapse pressure estimates and the application of a partial safety factor to cylinders subject to experimental pressure. Nuclear Engineering and Technology. 42(4), pp.450-459.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.