최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.13 no.1, 2019년, pp.48 - 54
Analytical and experimental study were carried out in order to achieve simultaneous coating and injection molding of an automotive armrest. A mold was designed to be included one core and two cavities, which were composed of a substrate cavity and a coating cavity. The materials used were PC/ABS for...
Park, C. H., Ahn, H. J., Choi, D. H. and Pyo, B. G., Two-stage design optimization of an automotive fog blank cover for enhancing its injection molding quality, Trans. of the KSME(A), Vol. 34, No. 8, pp. 1097-1103, 2010.
Seo, B. H. and Lee, H. S., Development of two-component polyurethane metering system for in-mold coating, J. Korea Society of Die & Mold Engineering, Vol.10, No.2, pp. 1-6, 2016.
Jeong, Y. Y. and Lee, H. S., Effects of coating thickness on cavity pressure and surface characteristics in in-mold coating, Polymer(Korea), Vol. 42, No. 1, pp. 13-19, 2018.
Sigmasoft User's Manual, Sigma Engineering GmbH, Aachen, 2012.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.