최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.20 no.4, 2019년, pp.597 - 605
신근식 (한국도로공사 남북도로협력처) , 한희수 (금오공과대학교 토목공학과)
IPM bridge is an integral bridge that can be applied from span 30.0m up to 120.0m, the shape conditions of IPM bridge is also applicable to the rahmen bridge. In this study, to perform the structural analysis of Rahmen bridge and IPM Bridge, the researchers compared the distribution types such as lo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Integral Abutment Bridge이란? | Integral Abutment Bridge (이하 IAB Bridge)는 기존 조인트 교량이 가지는 문제점들을 개선한 교량 형식이 다. IAB Bridge는 상부구조와 하부구조가 일체화되어, 하부구조가 상부구조의 수직하중과 수평변위를 지지하게 된다. | |
상부구조에 영향을 주는 요소는? | IAB Bridge는 상부구조와 하부구조가 일체화되어, 하부구조가 상부구조의 수직하중과 수평변위를 지지하게 된다. 따라서, 상부구조의 수평변위를 유발하는 온도하중과 시간의존적 하중에 큰 영향을 받는다[1]. 뿐만 아니라, 하부구조는 벽체교대와 기초교대 그리고 이를 지지하는 말뚝기초로 구성되므로, 지반과 구조물의 상호작용에도 큰 영향을 받는다[2-3]. | |
IPM Bridge와 IAB Bridge의 차이점은? | IPM Bridge는IAB Bridge와 동일하게, 상부구조와 하부구조가 일체화된 일체식 교대 교량이다. 하지만, 교대가 지지하는 횡방향 토압을 보강토옹벽이 지지하기 때문에, 말뚝기초는지표면으로부터 돌출된 파일벤트 형식이다. IAB Bridge에서 필요하였던 앞성토와 날개벽은, 보강토옹벽으로 인해 제거되기 때문에 다리밑공간은 늘어나게 된다[8-9]. |
H. B. Kim, T. S. Kim, J. S. Park, H. S. Han, "Analysis of Minimum Penetrated Depth of Pile bent of IPM Bridge". Journal of the Korean Geo-environmental Society, Vol.18, No.5, pp.45-53, 2017. DOI: https://doi.org/10.14481/jkges.2017.18.5.45
W. S. Kim, J. A. Laman, "Integral abutment bridge behavior under uncertain thermal and time-dependent load", Structural Engineering and Mechanics, Vol.46, No.1, pp.53-73, 2013. DOI: https://doi.org/10.12989/sem.2013.46.1.053
S. M. Olson, K. P. Holloway, J. M. Buenker, J. H. Long, J. M. LaFave, "Thermal behavior of IDOT integral abutment bridges and proposed design modifications", FHWA-ICT-12-022, Illinois Center for Transportation, Illinois, pp.1-63, 2013.
S. Arsoy, J. M. Duncan, R. M. Barker, "Behavior of a Semiintegral Bridge Abutment under Static and Temperature-Induced Cyclic Loading", Journal of Bridge Engineering, Vol.9, No.2, pp.193-199, 2004. DOI: https://doi.org/10.1061/(ASCE)1084-0702(2004)9:2(193
M. Dicleli, S. M. Albhaisi, "Maximum length of integral bridges supported on steel H-piles driven in sand", Engineering structures, Vol.25, No.12, pp.1491-1504, 2003. DOI: https://doi.org/10.1016/S0141-0296(03)00116-0
M. Feldmann, J. Naumes, D. Pak, M. Veljkovic, M. Nilsson, J. Eriksen, P. Collin, O. Kerokoski, H. Petursson, M. Verstraete, "Economic and durable design of composite bridges with integral abutments", European Commission Joint Research Centre, pp.140, 2010. DOI: https://doi.org/10.2777/91014
M. S. Nam, J. N. Do, T. S. Kim, Y. H, Park, H. J. Kim, "Development of IPM Bridge", Korea Expressway Corperation Research Institute: Korea, 2016.
M. C. Park, M. S. Nam, "Behavior of integral abutment bridge with partially protruded piles", Geomechanics and Engineering, Vol.14, No.6, pp.601-614, 2018. DOI: http://dx.doi.org/10.12989/gae.2018.14.6.601
M. C. Park, M. S. Nam, "Numerical Analysis of the Behavior of an IPM Bridge According to Super-Structure and Sub-Structure Properties", Sustainability, 10(3), 833, 2018. DOI: https://doi.org/10.3390/su10030833
M. Dicleli, S. Erhan, "Effect of soil and substructure properties on live-load distribution in integral abutment bridges", Journal of Bridge Engineering, Vol.13, No.5, pp. 527-539, 2008. DOI: https://doi.org/10.1061/(ASCE)1084-0702(2008)13:5(527)
T. S. Kim, "Performance Verification and Behavior Analysis of Integrated and Pile Bented Abutment with Mechanically Stabilized Earth Wall Bridge(IPM Bridge)", Thesis paper, Kumoh National Institute of Technology. 2017.
VTrans IAC. "Integral Abutment Bridge Design Guidelines, 2ed. VTrans Structures Section", Montpelier, Vermont: the State of Vermont, Agency of Transportation, 2008.
MLTMA, "Road design manual", Ministry of Land, Transport and Maritime Affairs, 2008.
CEB-FIP, "Model code 1990." Bulletin d'Information, 1990.
KEC (2016). "IPM Bridge design Guidelines", Korea Expressway Corperation.
KEC (2012). "Expressway Construction Guide Specification." Korea Expressway Corperation.
L. C. Reese, W. R. Cox, F. D. Koop, "Analysis of laterally loaded piles in sand", Offshore Technology in Civil Engineering Hall of Fame Papers from the Early Years, OTC 2080, pp.95-105, 1974. DOI: https://doi.org/10.4043/2080-MS
Korean Geotechnical Society, Structure foundation design standards specification, Ministry of Land, Transport and Maritime Affairs, 2015.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.