$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

지르코니아 기성관에 컴포머와 레진 시멘트로 접착한 교정 밴드의 결합력
Bond Strength of Band on Zirconia Crown with Compomer and Resin Cement 원문보기

大韓小兒齒科學會誌 = Journal of the Korean academy of pediatric dentistry, v.46 no.2, 2019년, pp.127 - 134  

박찬희 (연세대학교 원주세브란스기독병원 소아치과) ,  이종형 (연세대학교 원주세브란스기독병원 소아치과) ,  이한길 (연세대학교 원주세브란스기독병원 소아치과) ,  김지훈 (연세대학교 원주세브란스기독병원 소아치과)

초록
AI-Helper 아이콘AI-Helper

이 연구의 목적은 지르코니아 기성관에 대한 교정용 밴드의 접착제로서 컴포머 시멘트와 레진 시멘트를 평가하고자 하였다. 총 30개의 시편을 준비하였다. 상악 우측 제 2유구치의 스테인리스 스틸 기성관에 컴포머 시멘트로 교정용 밴드를 접착한 I군과 지르코니아 기성관에 컴포머 시멘트로 밴드를 접착한 II군, 지르코니아 기성관에 레진 시멘트로 밴드를 접착한 III군으로 나누었고 밴드의 결합력을 측정하기 위해 인장력을 가하였다. I군, II군과 III군의 결합력의 평균값은 각각 0.79 MPa, 1.09 MPa 그리고 1.56 MPa였다. II군이 I군보다 유의하게 높은 결합력을 보였고, II군과 III군 의 결합력에는 유의한 차이가 없었다. 컴포머 시멘트와 기능성 단량체를 포함한 레진 시멘트는 유구치 지르코니아 기성관에 대한 교정용 밴드의 시멘트로서 양호한 결합력을 보였다.

Abstract AI-Helper 아이콘AI-Helper

The aim of this study was to evaluate the compomer cement and resin cement as an orthodontic band cement on zirconia crown. A total of 30 specimens were prepared. Preformed stainless steel crowns and zirconia crowns of upper right second primary molar were used. Orthodontic bands were cemented on st...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 첫 번째, 기성관 자체의 형태 차이 때문에 시멘트만의 영향을 비교할 수 없었다. 같은 크기의 지르코니아 도재관 및 스테인리스 스틸 주조관을 제작하여 연구할 수도 있었지만, 유구치의 수복에서는 기성관을 많이 사용하기 때문에 유사한 크기 및 형태의 기성관을 선택하여 이러한 한계점을 보완하려 노력하였다. 하지만 기성관을 사용함으로써 발생할 수밖에 없는 형태적 차이가 교정용 밴드의 결합력에 얼마나 영향을 미치는지에 대한 후속 연구가 필요하다.
  • 이 연구는 유구치 지르코니아 기성관에 컴포머와 레진 시멘트가 교정용 밴드의 시멘트로서 임상적으로 사용가능한지 알아보고자 시행되었다. 스테인리스 스틸 기성곤卜, 지르코니아 기성관에 컴포머와 레진시멘트로 교정용 밴드를 접착한 후 결합력을 측정하였다.
  • 그러나 레진 시멘트의 경우 물리적, 화학적 성질은 우수하나 구강 내 환경이 적절히 조절되지 않는다면 접착에 어려움이 있다. 특히 협조가 잘 안되는 환아에서 접착이 실패할 가능성이 높으므로, 레진 시멘트를 이용한 스테인리스 스틸 기성관에 교정용 밴드의 접착은 임상적 사용 가능성을 평가하고자 하는 본 연구의 목적에 부합하지 않았다.
본문요약 정보가 도움이 되었나요?

참고문헌 (32)

  1. Brown D : Orthodontic band cements. Br J Orthod, 16:127-131, 1989. 

  2. Seeholzer HW, Dasch W : Banding with a glass ionomer cement. J Clin Orthod, 22:165-169, 1988. 

  3. Aggarwal M, Foley TF, Rix D : A comparison of shear-peel band strengths of 5 orthodontic cements. Angle Orthod, 70:308-316, 2000. 

  4. Mennemeyer VA, Neuman P, Powers JM : Bonding of hybrid ionomers and resin cements to modified orthodontic band materials. Am J Orthod Dentofacial Orthop, 115:143-147, 1999. 

  5. Bawazir OA, Elaraby A, Alshamrani H, Salama FS : Effect of sandblasting and type of cement on the bond strength of molar bands on stainless steel crowns. J Dent Child (Chic), 82:64-69, 2015. 

  6. Beemer RL, Ferracane JL, Howard HE : Orthodontic band retention on primary molar stainless steel crowns. Pediatr Dent, 15:408-413, 1993. 

  7. Youn YA, Lee YK, Lim YK, et al. : Effect of surface treatment and type of cement on the retentive strength of orthodontic bands on gold alloy crowns. Am J Orthod Dentofacial Orthop, 132:728.1-6, 2007. 

  8. Afshar H, Kamali Sabeti A, Shahrabi M : Comparison of primary molar crown dimensions with stainless steel crowns in a sample of Iranian children. J Dent Res Dent Clin Dent Prospects, 9:86-91, 2015. 

  9. Mizrahi E : Retention of the conventional orthodontic band. Br J Orthod, 4:133-137, 1977. 

  10. Uysal T, Ramoglu SI, Ertas H, Ulker M : Microleakage of orthodontic band cement at the cement-enamel and cement-band interfaces. Am J Orthod Dentofacial Orthop, 137:534-539, 2010. 

  11. Chung CK, Millett DT, Fote RH, et al. : Fluoride release and cariostatic ability of a compomer and a resin-modified glass ionomer cement used for orthodontic bonding. J Dent, 26:533-538, 1998. 

  12. Ozcan M, Bernasconi M : Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis. J Adhes Dent, 17:7-26, 2015. 

  13. Lee JH, Lee M, Kim KN, Hwang CJ : Resin bonding of metal brackets to glazed zirconia with a porcelain primer. Korean J Orthod, 45:299-307, 2015. 

  14. Papia E, Larsson C, du Toit M, Vult von Steyern P : Bonding between oxide ceramics and adhesive cement systems: a systematic review. J Biomed Mater Res B Appl Biomater, 102:395-413, 2014. 

  15. Kern M, Wegner SM : Bonding to zirconia ceramic: Adhesion methods and their durability. Dent Mater, 14:64-71, 1998. 

  16. Kim J, Park C, Lee Y, et al. : The effect of various types of mechanical and chemical preconditioning on the shear bond strength of orthodontic brackets on zirconia restorations. Scanning, 2017:6243179, 2017. 

  17. Lung CY, Kukk E, Matinlinna JP : The effect of silica-coating by sol-gel process on resin-zirconia bonding. Dent Mater J, 32:165-172, 2013. 

  18. Yang B, Barloi A, Kern M : Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater, 26:44-50, 2010. 

  19. de Oyague RC, Monticelli F, Osorio R, et al. : Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent Mater, 25:172-179, 2009. 

  20. Della Bona A, Borba M, Benetti P, Cecchetti D : Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Braz Oral Res, 21:10-15, 2007. 

  21. Kern M, Thompson VP : Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent, 73:240-249, 1995. 

  22. Ozcan M, Pfeiffer P, Nergiz I : A brief history and current status of metal-and ceramic surface-conditioning concepts for resin bonding in dentistry. Quintessence Int, 29:713-724, 1998. 

  23. Zhang Y, Pajares A, Lawn BR : Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems. J Biomed Mater Res B Appl Biomater, 71:166-171, 2004. 

  24. Uo M, Sjogren G, Bergman M, et al. : Effect of surface condition of dental zirconia ceramic (Denzir) on bonding. Dent Mater J, 25:626-631, 2006. 

  25. Ogaard B, Rolla G, Arends J : Orthodontic appliances and enamel demineralization. Part 1. Lesion development. Am J Orthod Dentofacial Orthop, 94:68-73, 1988. 

  26. Dastjerdie EV, Zarnegar H, Behnaz M, Seifi M : Strength of attachment between band and glass ionomer cement. Aust Orthod J, 26:149-152, 2010. 

  27. Norris DS, McInnes-Ledoux P, Schwaninger B, Weinberg R : Retention of orthodontic bands with new fluoride-releasing cements. Am J Orthod, 89:206-211, 1986. 

  28. Millett D, Mandall N, Glenny AM, et al. : Adhesives for fixed orthodontic bands. A systematic review. Angle Orthod, 79:193-199, 2009. 

  29. Parisay I, Khazaei Y : Evaluation of retentive strength of four luting cements with stainless steel crowns in primary molars: An in vitro study. Dent Res J (Isfahan), 15:201-207, 2018. 

  30. Yilmaz Y, Dalmis A, Gurbuz T, Simsek S : Retentive force and microleakage of stainless steel crowns cemented with three different luting agents. Dent Mater J, 23:577-584, 2004. 

  31. Heravi F, Omidkhoda M, Ghaffari N, et al. : Retentive strength of orthodontic bands cemented with amorphous calcium phosphate-modified glass ionomer cement: an invitro study. J Dent (Tehran), 14:13-20, 2017. 

  32. Reddy R, Basappa N, Reddy VV : A comparative study of retentive strengths of zinc phosphate, polycarboxylate and glass ionomer cements with stainless steel crowns-an in vitro study. J Indian Soc Pedod Prev Dent, 16:9-11, 1998. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로