참고문헌 (44)

1. D. W. Richerson, Modern Ceramic Engineering; 2nd Edition, Marcel Dekker Inc., NewYork Basel; 1992. 

2. C. A. Harper, Handbook of Materials for Product Materials for Product Design; 3rd Edition, McGraw-Hill, London, 2001. 

3. S. Somiya, Handbook of Advanced Ceramics; Elsevier Academic Press, Oxford, 2003. 

4. C. Kalkandelen, M. Suleymanoglu, S. E. Kuruca, A. Akan, F. N. Oktar, and O. Gunduz, "Part 2: Biocompatibility Evaluation of Hydroxyapatite-based Clinoptilolite and $Al_2O_3$ Composites," J. Aust. Ceram Soc., 53 [1] 217-23 (2017). 

5. C. H. Huang and Y. Chen, "Effect of Mechanical Properties on the Ballistic Resistance Capability of $Al_2O_3-ZrO_2$ Functionally Graded Materials," Ceram. Int., 42 [11] 12946-55 (2016). 

   상세보기

6. Z. Aslanoglu and A. Sesver, "The Postmortem Study of Used Refractory Brick in EAF Dust Recovery Kiln," J. Aust. Ceram Soc., 53 [2] 933-38 (2017). 

7. S. N. Monteiro, L. H. L. Louro, A. V. Gomes, C. F. M. Chagas, A. B. Caldeira, and E. P. Lima, "How Effective is a Convex $Al_2O_3-Nb_2O_5$ Ceramic Armor," Ceram. Int., 42 [6] 7844-47 (2016). 

   상세보기

8. H. Setiawan, R. Khairani, M. A. Rahman, R. Septawendar, R. R. Mukti, H. K. Dipojono, and B. S. Purwasasmita, "Synthesis of Zeolite and ${\gamma}$ -Alumina Nanoparticles as Ceramic Membranes for Desalination Applications," J. Aust. Ceram Soc., 53 [2] 531-38 (2017). 

9. N. J. Welham and N. Setoudeh, "Formation of an Alumina-Silicon Carbide Nanocomposite," J. Mater. Sci., 40 [12] 3271-73 (2005). 

   상세보기

10. H. Z. Wang, L. Gao, and J. K. Guo, "The Effect of Nanoscale SiC Particles on the Microstructure of $Al_2O_3$ Ceramics," Ceram. Int., 26 [4] 391-96 (2000). 

    상세보기

11. A. Gadalla, M. Elmasry, and P. Kongkachuichay, "High Temperature Reactions within SiC- $Al_2O_3$ Composites," J. Mater. Res., 7 [9] 2585-92 (1992). 

    상세보기

12. M. Parchoviansky, J. Balko, P. Svancarek, J. Sedlacek, J. Dusza, F. Lofaj, and D. Galusek, "Mechanical Properties and Sliding Wear Behaviour of $Al_2O_3$ -SiC Nanocomposites with 3-20 vol% SiC," J. Eur. Ceram Soc., 37 [14] 4297-306 (2017). 

    상세보기

13. C. Greskovich, and B. J. Anthony, "Solubility of Magnesia in Polycrystalline Alumina at High Temperatures," J. Am. Ceram. Soc., 84 [2] 420-25 (2004). 

14. R. S. Mishra and A. K. Mukherjee, "Processing of High Hardness-High Toughness Alumina Matrix Nanocomposites," Mater. Sci. Eng. A, 301 [1] 97-101 (2001). 

15. R. D. Bagley and D. L. Johnson, "Effect of Magnesia on Grain Growth in Alumina," Adv. Ceram., 10 666-78 (1984). 

16. C. A. Duan, "Effects of Chemical in Homogeneities on Grain Growth and Microstructure in $Al_2O_3$ ," J. Am. Ceram. Soc., 72 [1] 130-36 (1989). 

    상세보기

17. J. Wang, S. Y. Lim, S. C. Ng, C. H. Chew, and L. M. Gan, "Dramatic Effect of a Small Amount of MgO Addition on the Sintering of $Al_2O_3$ -5 vol% SiC Nanocomposite," Mater. Lett., 33 [5-6] 273-77 (1998). 

18. M. Ahmadzadeh, H. Baharvandi, H. Abdizadeh, and A. M. Hadian, "Synthesis of Nano-Size MgO Powder by Chemical Deposition of Low Cost Raw Materials," Int. J. Mod. Phys. B, 22 [18] 3185-92 (2008). 

    상세보기

19. ASTM B311-93, Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity. Developed by Subcommittee: B09.11, Book of Standards: 02(05); 2002. 

20. D. Galusek, J. Sedlacek, P. Svancarek, R. Riedel, R. Satet, and M. Hoffmann, "The Influence of Post-Sintering HIP on the Microstructure, Hardness, and Indentation Fracture Toughness of Polymer-Derived $Al_2O_3$ -SiC Nanocomposites," J. Eur. Ceram. Soc., 27 [2-3] 1237-45 (2007). 

21. S. Sinhamahapatra, M. Shamim, H. S. Tripathi, A. Ghosh, and K. Dana, "Kinetic Modeling of Solid State Magnesium Aluminum at Espinel Formation and its Validation," Ceram. Int., 42 [7] 9204-13 (2016). 

22. ASTM C1161-02c, Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature. Developed by Subcommittee: C28.01, Book of Standards: 15(01); 2008. 

23. ASTM C769-98, "Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus", Developed by Subcommittee: D02.F0, Book of Standards: 05(05); 2005. 

24. ASTM C1327-08, Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics", Developed by Subcommittee: C28.01, Book of Standards: 15(01); 2008. 

25. A. Moradkhani, H. Baharvandi, M. Tajdari, H. Latifi, and J. Martikainen, "Determination of Fracture Toughness Using the Areas of Microcrack Tracks Left in Brittle Materials by Vickers Indentation Test," J. Adv. Ceram., 2 [1] 87-102 (2013). 

26. K. A. Nihhara, R. Morena, and D. P. H. Hasselman, "Evaluation of KIC of Brittle Solids by the Indentation Method with Low Crack-to-Indent Ratios," J. Mater. Sci. Lett., 1 [1] 13-6 (1982). 

    상세보기

27. D. K. Shetty, I. G. Wright, P. N. Mincer, and A. H. Cluar, "Indentation Fracture of WC-Co Cermets," J. Mater. Sci., 20 [5] 1873-82 (1985). 

    상세보기

28. R. Gao, H. Wang, Q. Zhu, Q. Yang, X. Sun, B. Li, S. Xu, and X. Zhang, "The Forming Region and Mechanical Properties of $SiO_2-Al_2O_3$ -MgO Glasses," J. Non-Cryst. Solids, 470 132-37 (2017). 

    상세보기

29. R. Mohammad-Rahimi, H. R. Rezaie, and A. Nemati, "Sintering of $Al_2O_3$ -SiC Composite from Sol-Gel Method with MgO, $TiO_2$ and $Y_2O_3$ Addition," Ceram. Int., 37 [5] 1681-88 (2011). 

    상세보기

30. A. R. Yazdi, H. Baharvandi, H. Abdizadeh, J. Purasad, A. Fathi, and H. Ahmadi, "Effect of Sintering Temperature and Siliconcarbide Fraction on Density, Mechanical Properties and Fracture mode of Alumina-Silicon Carbide Micro/Nanocomposites," Mater. Des., 37 251-55 (2012). 

31. C. C. Anya and S. G. Roberts, "Pressureless Sintering and Elastic Constants of $Al_2O_3$ -SiC Nanocomposites," J. Eur. Ceram. Soc., 17 [4] 565-73 (1997). 

    상세보기

32. E. Medvedovski, "Alumina-Mullite Ceramics for Structural Applications," Ceram. Int., 32 [4] 369-75 (2006). 

    상세보기

33. A. Moradkhani and H. Baharvandi, "Microstructural Analysis of Fracture Surfaces and Determination of Mechanical Properties of $Al_2O_3$ -SiC-MgO Nanocomposites," Int. J. Refract. Met. Hard Mater., 67 40-55 (2017). 

34. M. Sternitzke, "Review: Structural Ceramic Nanocomposites," J. Eur. Ceram. Soc., 17 [9] 1061-82 (1997). 

35. L. Xuefei, L. Hanlian, H. Chuanzhen, Z. Bin, and Z. Longwei, "High Temperature Mechanical Properties of $Al_2O_3$ -based Ceramic Tool Material Toughened by SiC Whiskers and Nanoparticles," Ceram. Int., 43 [1] 1160-65 (2017). 

    상세보기

36. J. F. Shackelford and W. Alexander, CRC Materials Science and Engineering Handbook; 3rd Edition, CRC Press, Florida, 2001. 

37. A. Moradkhani, H. Baharvandi, and M. M. M. Samani, "Mechanical Properties and Microstructure of B4C-Nano- $TiB_2$ -Fe/Ni Composites under Different Sintering Temperatures," Mater. Sci. Eng. A, 665 141-53 (2016). 

38. A. Moradkhani and H. Baharvandi, "Analyzing the Microstructures of W-ZrC Composites Fabricated through Reaction Sintering and Determining their Fracture Toughness Values by Using the SENB and VIF Methods," Eng. Fract. Mech., 189 501-13 (2018). 

    상세보기

39. A. Moradkhani and H. Baharvandi, "Effects of Additive Amount, Testing Method, Fabrication Process and Sintering Temperature on the Mechanical Properties of $Al_2O_3$ /3Y-TZP Composites," Eng. Fract. Mech., 191 446-60 (2017). 

40. A. Moradkhani, H. Baharvandi, and A. Naserifar, "Fracture Toughness of 3Y-TZP Dental Ceramics by Using Vickers Indentation Fracture and SELNB Methods," J. Korean Ceram. Soc., 56 [1] 37-48 (2019). 

41. B. K. Jang, M. Enoki, T. Kishi, H. K. Oh, "Effect of Second Phase on Mechanical Properties and Toughening of $Al_2O_3$ based Ceramic Composites," Comps. Eng., 5 [10-11] 1275-86 (1995). 

42. J. Zhao, L. C. Stearns, M. P. Harmer, H. M. Chan, G. A. Miller, and R. F. Cook, "Mechanical Behavior of Alumina-Silicon Carbide Nanocomposites," J. Am. Ceram. Soc., 76 [2] 503-10 (1993). 

    상세보기

43. T. Ohji, Y. K. Jeong, Y. H. Choa, and K. Niihara, "Strengthening and Toughening Mechanisms of Ceramic Nanocomposites," J. Am. Ceram. Soc., 81 [6] 1453-60 (1998). 

    상세보기

44. I. Levin, W. D. Kaplan, D. G. Brandon, and A. A. Layyous, "Effect of SiC Submicrometer Particle Size and Content on Fracture Toughness of Alumina-SiC Nanocomposites," J. Am. Ceram. Soc., 78 [1] 254-56 (1995). 

    상세보기