최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기전자학회논문지 = Journal of IKEEE, v.23 no.3, 2019년, pp.1104 - 1107
김찬유 (School of Electrical and Computer Engineering & The Research Institute for Computer and Information Communication, Chungbuk National University) , 김태운 (School of Electrical and Computer Engineering & The Research Institute for Computer and Information Communication, Chungbuk National University) , 최호용 (School of Electrical and Computer Engineering & The Research Institute for Computer and Information Communication, Chungbuk National University)
This paper proposes a DC-DC boost converter for wearable AMOLED display using dead time controller to reduce dead time and improve power efficiency. Also the DC-DC boost converter adopts PWM-SPWM (set-time variable pulse width modulation) dual-mode to enhance power efficiency under light load and de...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
AMOLED의 장점은? | AMOLED (active matrix organic light emitting diodes)는 광 시야각, 명암비, 인지 휘도, 시인성 및 경량의 장점으로 웨어러블 기기들에 널리 응용되고 있다[1-2]. | |
PFM 방식의 단점은? | 경부하에서의 효율을 제고하기 위해 PWM 방식 대신 PFM 또는 PSM(pulse skipping modulation)-PWM 방식을 사용하는 듀얼 모드 변환기가 제안 되었다[4-5]. 그러나 PFM 방식은 회로가 복잡하고, PSM 방식은 출력 전압의 리플이 커 추가로 LDO가 필요하다. | |
전력 트랜지스터에서 shoot-through 전류와 body diode conduction에 의해 전력 손실이 야기되는데 이는 어떤 제어가 요구되는가? | 한편, 전력 트랜지스터에서 shoot-through 전류와 body diode conduction에 의해 전력 손실이 야기된다. 이는 dead time에 의한 불필요한 손실이 발생되어 최적의 dead time 제어가 요구된다[6]. |
※ AI-Helper는 부적절한 답변을 할 수 있습니다.