[논문]Alloy718/SCM440 마찰용접재의 AE에 의한 동적 거동평가

김동규; 공유식; 이진경

doi:10.21289/ksic.2019.22.5.491

Alloy718/SCM440 마찰용접재의 AE에 의한 동적 거동평가
Evaluation on Dynamic Behavior of Friction Welded Joints in Alloy718 to SCM440 using Acoustic Emission Technique 원문보기

한국산업융합학회 논문집 = Journal of the Korean Society of Industry Convergence, v.22 no.5, 2019년, pp.491 - 497

김동규 (부경대학교 기계조선융합공학과) , 공유식 (부경대학교 기계공학과) , 이진경 (동의대학교 기계자동차로봇부품공학부)

Abstract ▼ AI-Helper

Dissimilar friction welding were produced using 15 mm diameter solid bar in superalloy(Alloy718) to chrome molybdenum steel(SCM440) to investigate their mechanical properties. Consequently, optimal welding conditions were n=2000 rpm, HP=60 MPa, UP=120 MPa, HT=10 sec and UT=10 sec when the metal loss(Mo) is 3.5 mm. Acoustic Emission(AE) technique was applied to analyze the dissimilar friction welding of Alloy718 and SCM440. The relationship between the AE parameters and dissimilar friction welding of both material was discussed. In the case of heating time of 6 sec, 10 sec, 14 sec and 20 sec, 5 AE events per 0.5 seconds and energy about $2.7{\times}10^{10}$ were exhibited in heating time. In upsetting time, resulting in various numbers of events per second and very low energy. The frequency range of the signal generated during the heating time was about 200 kHz. However, the upsetting time resulted in a wide range of signals from very low frequency to high frequency of 500 kHz due to rapid plasticity of the material.

주제어

표/그림 (9)

그림 Fig. 1 Friction welding specimens
표 Table 1. Mechanical properties of materials
그림 Fig. 2 Friction welding machine
그림 Fig. 3 Relationship between tensile strength and pressure of as-welded specimens
표 Table 2. Friction welding conditions and dimension of specimen
그림 Fig. 4 Relationship between metal loss and heating time of as-welded specimens
그림 Fig. 5 AE event at heating and upset times according to heating times change
그림 Fig. 6 ABS energy and Cumulative count according to heating times change.
그림 Fig. 7 Average frequency and Cumulative count according to heating times change

참고문헌 (9)

Y. S. Kong and J. K. Lee, "Optimal welding condition of dissimilar friction welded materials and its real time evaluation by acoustic emission," Journal of The Korean Society for Industry Convergence, vol. 22, no. 2, pp. 191-199, (2019).
L. Wenya and W. Feifan, "Modeling of continuous drive friction welding of mild steel," Materials Science and Engineering A, vol. 528, pp. 5921-5926, (2011).

상세보기
M. B. Uday, M. N. Ahmad Fauzi, H. Zuhailawati and A. B. Ismail, "Advances in friction welding process: a review," Science and Technology of Welding and Joining, vol. 15, no. 7, pp. 534-558, (2010).

상세보기
C. Mary and M. Jahazi, "Linear friction welding of IN718 process optimization and microstructure evolution," Advanced Materials Research, vol. 15-17, pp 357-362, (2006).

상세보기
S. M. Chowdhury, D. L. Chen, S. D. Bhole and X. Cao, "Tensile properties of a friction stir welded magnesium alloy: Effect of pin tool thread orientation and weld pitch," Materials Science and Engineering A, vol. 527, pp. 6064-6075, (2010).

상세보기
G. S. Chander, G. M. Reddy and A. V. Rao, "Influence of rotational speed on microstructure and mechanical properties of dissimilar metal AISI 304-AISI 4140 continuous drive friction welds," Journal of Iron and Steel Research, vol. 19, no. 10, pp. 64-73, (2012).

상세보기
Zhe Geng, Debashis Puhan, Tom Reddyhoff, "Using acoustic emission to characterize friction and wear in dry sliding steel contacts", Tribology International, In press, (2019).
Mao Sheng, Shouceng Tian, Bo Zhang, Hongkui Ge, "Frequency analysis of multi-sources acoustic emission from high-velocity waterjet rock drilling and its indicator to drilling efficiency", International Journal of Rock Mechanics and Mining Sciences, Vol 115, pp. 137-144, (2019).

상세보기
D. G. Kim, Y. S. Kong and J. K. Lee, "Evaluation of acoustic emission technique for dissimilar friction welding of forgings and pipes," Journal of Korean Society for Nondestructive Testing, vol. 38, no. 6, pp. 361-366, (2018).

상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증