최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.35 no.10, 2019년, pp.47 - 66
박민철 (서울기술연구원) , 권오균 (계명대학교 공과대학 건축토목공학부) , 김채민 (경성대학교 건설환경도시공학부) , 윤도균 (경성대학교 대학원 토목공학과) , 최용규 (경성대학교 공과대학 건설환경도시공학부)
A parametric numerical analysis according to diameter, length, and N values of soil was conducted for the PHC pile socketed into weathered rock through sandy soil layers. In the numerical analysis, the Mohr-Coulomb model was applied to PHC pile and soils, and the contacted phases among the pile-soil...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
말뚝 기초의 연직지지력은 어떻게 나타낼 수 있는가? | 일반적으로 말뚝기초의 연직지지력은 주면마찰력과선단지지력의 합으로 나타낼 수 있다. 여기서 주면마찰력이 극한에 도달하기 위한 변위는 말뚝 직경의 1% 내외 수준인 반면, 선단지지력이 극한에 도달하기 위해서는 말뚝 직경의 10% 정도의 침하가 발생해야 하므로,사용하중 하에서 말뚝에 작용하는 대부분의 하중은 주면마찰력이 분담하게 된다(Tomlinson, 1994). | |
말뚝의 연직방향하중이 말뚝 주면을 지나 선단에 전달되는 하중전이 거동을 실제와 가깝게 예측하는 방법은? | 말뚝의 연직방향하중이 말뚝 주면을 지나 선단에 전달되는 하중전이 거동을 실제와 가깝게 예측하는 방법으로는 하중전이함수법, 수치해석방법 등이 주로 사용된다. 한편 수치해석방법의 경우, 현장의 실규모 재하시험 결과를 역해석하고, 몇 가지 중요 영향인자에 대한 매개변수 해석을 실시하여 해석 결과의 신뢰성을 제고하기도 한다. | |
시멘트 풀은 탄성모델을 적용한 이유는? | 말뚝 내부와 외부 공극에 충전되는 주면고정액인 시멘트 풀은 탄성모델을 적용하였다. 연직하중이 PHC말뚝에 재하되고, 이하중은 주면고정액과의 경계면 거동에 따라 지반으로 주면마찰력이 전이되기 때문에, 시멘트 풀에는 큰 하중이 재하되지 않는다. 따라서 최근 수행된 매입 말뚝에 대한 수치해석 사례와 동일하게 시멘트 풀은 탄성모델을 적용하였다(Jung et al. |
Brinkgreve, R. B. J., Kumarswamy, S., and Swolfs, W. M. (2015), "Reference Manual, Plaxis 3D 2015 user's manual", (Edited by Brinkgreve, R.B.J., Kumarswamy, S. and Swolfs, W. M), pp.1-284.
Chen, W. F. (1982), Plasticity in Reinforced Concrete, McGraw- Hill Co.
Choi, Y. K., Kwon, O. K., Lee, W. J., and Yeo, K. K. (2017), Report for axial compressive load behavior of PHC piles with various end bearing types, KGS, Report No. KGS09-038, 2017. 9., p.160. (in Korean)
Choi, Y. K., Kwon, O. K., Lee, W. J., Yeo, K. K., and Park, M.C. (2019a), A Study for Establishing of Behavior, Design and Construction on Prebored and Precast Piles (Development of Capacity Prediction Method and Chart for Prebored and precast Piles Considering Soil Types, Pile Penetration Lengths, Pile Diameter), Report No. KGS 2019-083, pp.21-45, pp.273-300. (In Korean)
Choi, Y. K., Lee, W. J., Lee, C. U., and Kwon, O. K. (2019b), "Study(I) on Development of Charts and Formulae Predicting Allowable Axial Bearing Capacity for Prebored PHC Pile Socketed into Weathered Rock through Sandy Soil Layers - An Analysis of Sharing Ratio of Skin Friction to Total Bearing Capacity (SRF) by Analyzing Pile Load Test Data -", Journal of the Korean Geotechnical Society, Vol.35, No.8, August 2019, pp.17-30. (In Korean)
Comodromos, E. M. and Pitilakis, K. D. (2005), "Response Evaluation for Horizontally Loaded Fixedhead Pile Groups Using 3-D Non-linear Analysis", International Journal for Numerical and Analytical Methods in Geomechanics, Vol.29, No.6, pp.597-625.
Do, J. N., Sim, J. W., and Park, Y. H. (2013), "Study on Strength Characteristics of Cement Milk According to Water-Cement Ratio", Conference of Korean Geo-environmental Society, pp.173-176. (in Korean)
Dunham, J. W. (1954), "Pile Foundation for Building", Proc. ASCE, Soil Mechanics and Foundations Division, Vol.80, No.285.
Fellenius, B. H. (2004), "Unified design of piled foundations with emphasis on settlement anysis", Geo-Trans Conference, Los Angeles, ASCE Geotechnical Special Publication 125, pp.253-275.
Jung, G. J., Kim, D. H., Lee, C. J., and Jeong, S. S. (2017), "Analysis of Skin Friction Behavior in Prebored and Precast Piles Based on Field Loading Test", Journal of the Korean Geotechnical Society, Vol.33, No.1, January, pp.31-38.
Kim, S. H., Jung, G. J., Jeong, S. S., Jeon, Y. J., Kim, J. S., and Lee, C. J. (2017), "A Study on the Behavior of Prebored and Precast Steel Pipe Piles from Full-Scale Field Tests and Class-A and C1 Type Numerical Anaylsis", Journal of the Korean Geo-Environmental Society, Vol.18, No.7, pp.37-47.
Kim, S, Y., Lee, S. H., Park, J. H., and Jeong, M. K. (2009a), "Analysis of Reinforcing Effect of Steel-Concrete Composite Pile by Numerical Analysis (I) - Material Strength -", Journal of Korean Society of Civil Engineers, Vol.29, No. 6C, pp.259-266. (in Korean)
Kim, S. Y., Lee, S. H., Jeong, M. K., and Lee, J. H. (2009b), "Analysis of Reinforcing Effect of Steel-Concrete Composite Pile by Numerical Analysis (II) - Soil Capacity -", Journal of Korean Society of Civil Engineers, Vol.29, No.6C, pp.267-275. (in Korean)
MIDAS I. T. (2013), GTS NX on-line manual, MIDAS Information Technology Co., Ltd.
Potts, D. M. (2003), "Numerical Analysis: A Virtual Dream or Practical Reality", Geotechnique, 53(6), pp.35-573.
Potts, D. M. and Zdravkovic, L. (2001), Finite element analysis in geotechnical engineering-Theory, London : Thomas Telford.
Rahim, A. (1998), "The significance of non-associated plasticity", Crisp News, Issue No. 6, November.
Tomlinson, M. J. (1994), Pile design and construction practice, 4th ed., E & FN Spon., pp.133-134.
Yoo etc. 21 authors (2015), Design Specification and Commentary for Foundation Design, Korean Geotechnical Society, pp.309. (In Korean).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.