최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.57 no.6, 2019년, pp.804 - 811
보르 암갈란 (창원대학교 메카트로닉스 융합부품소재 연구센터(ERC)) , 자갈사이항 바트체첵 (창원대학교 메카트로닉스 융합부품소재 연구센터(ERC)) , 이재현 (창원대학교 메카트로닉스 융합부품소재 연구센터(ERC)) , 최희규 (창원대학교 대학원 금속신소재공학과)
This study was performed the real motion and DEM simulation of ball motion using three different types of grinding media with different size and materials in media formation for optimization of process conditions in a traditional ball mill (media ball mill). In the simulation, the rotational speed o...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
임계회전속도란? | 또한 이들은1996년에는 교반 볼밀 분쇄 시, 분쇄매체의 운동 및 응력 강도를 고찰하여 분쇄장에서 분쇄매체의 움직임을연구하였다[1,2]. 매체형 전동밀(전동 볼 밀)에서는 밀의 회전수를 증가시켜 갈수록 원심력이 증가하여, 어떤 회전수 이상이 되면 볼의 회전속도가 밀의 회전속도와 동일하게 됨으로써, 마치 볼이 밀의 벽면에 붙어서 회전하는 것처럼 보인다. 이때의 회전수를 임계회전속도(critical rotation speed)라 한다. 이 임계회전속도는 분쇄포트의 크기, 분쇄매체의 크기, 또한 건식 또는 습식과 같은 분쇄방식에 의해서도 달라진다. | |
공정 변수의 변화에 가장 중요한 요인은? | 매체형 분쇄기(볼 밀)를 이용한 분쇄 공정에서 분쇄시료의 변화를 관찰하기 위해서는 매체와 분쇄시료간의 상호작용에 의한, 충격 및 마모 등의 메커니즘을 관찰하여야 하고, 이를 위해 다양한 공정변수를 변화시키는 실험을 행한다. 공정 변수의 변화에 따라 달라지는 여러 가지 작용 중, 가장 중요한 것이 분쇄매체의 움직임이다. 이는 분쇄매체의 움직임에 따라 분쇄매체가 분쇄시료에 가해지는 충격에너지가 달라지고, 이에 따라 분쇄특성이 변화하기 때문이다. | |
매체형 전동밀의 매체 재질은? | 7 mm 내경은 40 mm, 길이는 42 mm, 부피는 45 ml이다. 분쇄매체의 재질은 알루미나, 지르코니아 그리고 스테인리스스틸을 사용하였으며, 1, 3, 5, 7 mm의 크기의 매체를 사용하였다[6-9]. 본 연구에 사용된 분쇄시료로는 산업현장에서 고강도 경량 합금재료로 다양하게 사용되는 구리분말((주)알드리치, 순도 99. |
Blecher, L., Kwade, A. and Schwedes, J., "Motion and Stress Intensity of Grinding Beads in Stirred Media Mill. Part 1: Energy Density Distribution and Motion of Single Grinding Beads," Pow. Tech., 86, 59-68(1996).
Kwade, A., Blecher, L. and Schwedes, J., "Motion and Stress Intensity of Grinding Beads in Stirred Media Mill. Part 2: Stress Intensity and Its Effect on Comminution," Pow. Tech., 86, 69-76 (1996).
Watanabe, H., "Critical Rotation Speed for Ball-milling," Powd. Tech., 104, 95-99(1999).
Rose, H. E. and Sullivan, R. M. E., "A Treatise on the Internal Mechanics of ball tube and Rod mills," Constable, London 35-68 (1957).
Cho, H. C., "Manufacturing Ultra-Powder by Grinding," Powder Engineering Summer Workshop, 16, 54-64(2002).
Amgalan, B., Ichinkhorloo, B., Battsetseg, J., Lee, J. and Choi, H., "Particle Morphology Behavior and Milling Efficiency by DEM Simulation during Milling Process for Composites Fabrication by Traditional Ball Mill on Various Experimental Conditions - Effect of Rotation Speed, Ball Size, and Ball Material," Korean Chem. Eng. Res., 56(2), 191-203(2018).
Batchuluun, I., Amgalan, B., Uyanga, B., Lee, J. and Choi, H., "Particle Morphology Change and Different Experimental Condition Analysis during Composites Fabrication Process by Conventional Ball Mill with Discrete Element Method (DEM) Simulation," Korean J. Mater. Res., 26(11), 611-622(2016).
Uyanga, B., Amgalan, B., Batchuluun, I., Lee, J. and Choi, H., "Analysis of Particle Morphology Change and Discrete Element Method (DEM) with Different Grinding Media in Metal-based Composite Fabrication Process Using Stirred ball mill," Korean Chem. Eng, Res, 55(4), 546-466(2017).
Christine, F. and Arno, K., "Process Engineering with Planetary Ball Mills," Chem. Soc. Rev., 42, 7660-7667(2013).
Rosenkranz, S., Breitung-Faes, S. and Kwade, A., "Experimental Inverstogations and Modelling of the Ball Motion in Planetary Ball Mills," Powd. Tech., 212, 234-230(2011).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.