최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국트라이볼로지학회지 = Tribology and lubricants, v.36 no.6, 2020년, pp.378 - 384
박태조 (경상대학교 기계공학부) , 강정국 (경상대학교 기계항공정보융합공학부)
The friction surfaces of mechanical parts are heat-treated or coated with hard materials to minimize wear. Increasing the hardness is a very useful way to reduce abrasive wear. The general Brinell hardness test, which is widely used for metallic materials, is not suitable because it hardly shows any...
Holmberg, K., Ronkainen, H., Laukkanen, A., Wallin, K., "Friction and wear of coated surfaces - scales, modelling and simulation of tribomechanisms", Surf. Coat. Technol., Vol.202, No.4-7, pp.1034-1049, 2007.
Weppelmann, E., Swain, M. V., "Investigation of the stresses and stress intensity factors responsible for fracture of thin protective films during ultra-micro-indentation tests with spherical indenters", Thin Solid Films, Vol.286, pp.111-121, 1996.
Gan, L., Ben-Nissan, B., "The effects of mechanical properties of thin films on nano-indentation data: Finite element analysis", Comp. Mater. Sci., Vol.8, pp. 273-281, 1997.
Swain, M. V., "Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters", Mat. Sci. Eng. A, 253(1-2), pp. 160-166, 1998.
Tang, K. C., Arnell, R. D., "Determination of coating mechanical properties using spherical indenters," Thin Solid Films, Vol.355-356, pp.263-269, 1999.
Michler, J., Blank, E., "Analysis of coating fracture and substrate plasticity induced by spherical indentors: Diamond and diamond-like carbon layers on steel substrates", Thin Solid Films, Vol.381, pp.119-134, 2001.
Bouzakis, K.-D., Michailidis, N., "An accurate and fast approach for determining materials stress-strain curves by nanoindentation and its FEM-based simulation", Mat. Char., Vol.56, No.2, pp.147-157, 2006.
Lesage, J., Pertuz, A., Puchi-Cabrera, E.S., Chicot, D., "A model to determine the surface hardness of thin films from standard micro-indentation tests", Thin Solid Films, Vol.497, pp.232-238, 2006.
Kot, M., Rakowski, W., Lackner, J. M., Major, T., "Analysis of spherical indentations of coating-substrate systems: Experiments and finite element modeling", Mater. Des., Vol.43, pp.99-111, 2013.
Taljat, B., Pharr, G. M., "Development of pile-up during spherical indentation of elastic-plastic solids", Int. J. Solids Struct, Vol.41, No.14, pp.3891-3904, 2004.
Barajas, C., de Vicente, J., Caja, J., Maresca, P., Gomez, E., "Considerations to the hardness Brinell measurement using optical equipment", Procedia Manuf., Vol.13, pp.550-557, 2017.
ISO 6506-1, Metallic materials - Brinell hardness test. Part 1: Test Method, 2014.
ANSYS MSC. MARC/MENTAT 2012r1 User's Guide, A-E, 2012.
Jonsson, B., Hogmark, S., "Hardness measurements of thin films", Thin Solid Films, Vol.114, pp. 257-269, 1984.
Cai, X., Bangert, H., "Hardness measurements of thin films-determining the critical ratio of depth to thickness using FEM", Thin Solid Films, Vol.264, pp.59-71, 1995.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.