최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정보전자통신기술학회논문지 = Journal of Korea institute of information, electronics, and communication technology, v.13 no.6, 2020년, pp.556 - 561
조재현 (Department of Biomedical Engineering, Catholic Kwandong University) , 이상식 (Department of Biomedical Engineering, Catholic Kwandong University)
The aging and declining agricultural population in the modern society requires improvement of the agricultural environment and is one of the representative problems. And since most of the work systems always require a transport work, the ratio of labor consumed in the transport work is very high. Ac...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Y. Y. Jang, "Development of electromotive for klift for multipurpose operation", Research report on research and development project for agriculture, forestry and animal husbandry conducted by the Ministry of Agriculture, Forestry and Livestock, 2018
Sang-sik Lee, Jun-tae Kim, Won-yeop Park "Structural analysis for the development of a vertically raise type aerial work machinery" he korea institute of information & electronic communication technology, Vol. 10, No. 3, pp.225-231, 2017
Y. Y. Jang, "Development of eco-friendly electric cultivator using HBSR dual motor", Research report on research and development project for agriculture, forestry and animal husbandry conducted by the Ministry of Agriculture, Forestry and Livestock, 2014
Young Joo Kim, Wan Su Kim, Sun Ok Chung, Dae Hyun Lee "Analysis of Technical Trend of Electric Agricultural Field Machinery" Korean Society of Food and Agricultural Information Science, Vol. 6, No. 2, pp.40-48, 2014
Won-yeop Park, Kyou-seung Lee "Prediction of Tractive Performance of Off-Road Wheeled Vehicles" Transactions of korea society of automotive engineers, Vol. 8, No. 5, pp.188-195, 2000.
Myung Ho Bae, Tae Yeol Bae, Sung Kwang Choi, "The Study on Bending Stress Analysis of Gear Train for Hydro-Mechanical Continuously Variable Transmission for Forklift" The korea society of fluuid power & construction equipments, pp.168-173, 2016
Jun-tae Kim, Gi-yeong Lee, Snag-sik Lee, Won-yeop Park, "Centralized controller high-altitude work car elevations lift structure safety assessment", Kiiect Volume 10, No 4, pp. 350-357, 2017
Myung Ho Bae, Tae Yeol Bae, Sung Kwang Choi "The Critical Speed Analysis of Gear Train for Hydro-Mechanical Continuously Variable Transmission" The korea society of fluuid power & construction equipments, Vol. 14, No. 4, pp.71-78, 2017
Yong Hong, Bo myung Kim, Seok jun Yu, Seung ho Hwang, Byung guk Lee, Dong pyo Hong "A Study on a Structural Stability that Design the Main Frame of the Aerial Working Platform" Transactions of the korean society of mechanical engineers, Vol. 2012, No. 4-2, pp.111-112, 2012
Byeong-soo Kim, Jae-hwan Son, Kee-jin Park, Seung-min Woo "A study on optimizing design and stability of orchard high place operation car" Korean journal of computational design and engineering, vol. 2012, no. 2, pp.853-855, 2012
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.