최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society, v.31 no.1, 2020년, pp.122 - 131
오현석 (부산대학교 기계공학부) , 김강민 (부산대학교 기계공학부) , 김경민 (부산대학교 기계공학부) , 전충환 (부산대학교 기계공학부)
To reduce emissions from coal-fired power plants, researchers focusing on coal and biomass co-firing technology. Biomass, with its carbon-neutral nature and lower quantities of nitrogen and sulfur compared with coals, has a positive impact on coal-fired power generation. Many studies on the combusti...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Diffusion limited model이란 무엇인가? | 이 모델은 kinetic이 지배적인 저온 영역대의 반응을 설명하기에 적합하며 Zone I 반응으로 분류된다. Diffusion limited model은 kinetic에 의한 화학 반응속도론을 고려하지 않고 오직 확산에 의한 산화 반응을 기술하는 모델이다21). 이 모델은 촤 반응이 산소 확산속도보다 상당히 빠른 고온 영역대의 반응을 설명하기에 적합하며 Zone III 반응으로 분류된다. | |
혼소기술이란 무엇인가? | 이러한 석탄화력발전의 문제점을 해결하기 위한 여러 방안 중 하나로 많은 연구자들은 바이오매스 혼소기술에 주목한다. 혼소기술은 전력생산을 위해 재생 가능한 바이오매스 연료를 석탄과 함께 직접 연소하는 것을 의미한다3). 특정 생물 유래 바이오매스는 매우 빠른 성장 속도를 가지므로 에너지 생산에 정기적인 연료 공급원으로 사용할 수 있다. | |
FERPM이 기존 연소 모델에 비해 우수한 정확도를 보이는 분야는 무엇인가? | FERPM은 RPM의 다공성 입자의 반응도에 따라 내부 기공 구조가 변화한다는 기본 이론에 더하여, 연료 종류에 따른 반응속도의 차이를 나타낼 수 있는 실험 데이터 기반의 파라미터를 도입하여 연소성을 효과적으로 예측한다. 특히 바이오매스의 촤 연소에 있어 기존의 연소 모델에 비하여 우수한 정확도를 보이나 아직 전산해석에 적용한 사례는 없다. |
P. Madejski, "Thermal power plants : new trends and recent developments", IntechOpen, Poland, 2018, pp. 1-11.
S. R. Gubba, D. B. Ingham, K. J. Larsen, L. Ma, M. Pourkashanian, H. Z. Tan, A. Williams, and H. Zhou, "Numerical modelling of the co-firing of pulverised coal and straw in a 300 MWe tangentially fired boiler", Fuel Processing Technology, Vol. 104, 2012, pp. 181-188, doi: https://doi.org/10.1016/j.fuproc.2012.05.011.
E. Houshfar, O. Skreiberg, D. Todorovic, A. Skreiberg, T. Lovas, A. Jovovic, and L. Sorum, " $NO_x$ emission reduction by staged combustion in grate combustion of biomass fuels and fuel mixtures", Fuel, Vol. 98, 2012, pp. 29-40, doi: https://doi.org/10.1016/j.fuel.2012.03.044.
M. Sami, K. Annamalai, M. Wooldridge, "Co-firing of coal and biomass fuel blends", Prog. Energy Combust. Sci., Vol. 27, No. 2, 2001, pp. 171-214, doi: https://doi.org/10.1016/S0360-1285(00)00020-4.
K. Savolainen, "Co-firing of biomass in coal-fired utility boilers", Applied Energy, Vol. 74, No. 3-4, 2003, pp. 369-381, doi: https://doi.org/10.1016/S0306-2619(02)00193-9.
R. Perez-Jeldres, P. Cornejo, M. Flores, A. Gordon, and X. Garcia, "A modeling approach to co-firing biomass/coal blends in pulverized coal utility boilers: synergistic effects and emissions profiles", Energy, Vol. 120, 2017, pp. 663-674, doi: https://doi.org/10.1016/j.energy.2016.11.116.
A. A. Bhuiyan and J. Naser, "CFD modelling of co-firing of biomass with coal under oxy-fuel combustion in a large scale power plant", Fuel, Vol. 159, 2015, pp. 150-168, doi: https://doi.org/10.1016/j.fuel.2015.06.058.
S. Black, J. Szuhanszki, A. Pranzitelli, L. Ma, P. J. Stanger, D. B. Ingham, and M. Pourkashanian, "Effects of firing coal and biomass under oxy-fuel conditions in a power plant boiler using CFD modelling", Fuel, Vol. 113, 2013, pp. 780-786, doi: https://doi.org/10.1016/j.fuel.2013.03.075.
E. Kastanaki and D. Vamvuka, "A comparative reactivity and kinetic study on the combustion of coal-biomass char blends", Fuel, Vol. 85, No. 9, 2006, pp. 1186-1193, doi: https://doi.org/10.1016/j.fuel.2005.11.004.
A. I. Moreno, R. Font, and J. A. Conesa, "Combustion of furniture wood waste and solid wood: kinetic study and evolution of pollutants", Fuel, Vol. 192, 2017, pp. 169-177, doi: https://doi.org/10.1016/j.fuel.2016.12.022.
H. Yang, R. Yan, H. Chen, D. H. Lee, and C. Zheng, "Characteristics of hemicellulose, cellulose and lignin pyrolysis", Fuel, Vol. 86, No. 12-13, 2007, pp. 1781-1788, doi: https://doi.org/10.1016/j.fuel.2006.12.013.
H. Yang, R. Yan, H. Chen, C. Zheng, D. H. Lee, and D. T. Liang, "In-depth investigation of biomass pyrolysis based on three major components: hemicellulose, cellulose and lignin", Energy Fuels, Vol. 20, No. 1, 2006, pp. 388-393, doi: https://doi.org/10.1021/ef0580117.
J. E. White, W. J. Catallo, and B. L. Legendre, "Biomass pyrolysis kinetics: a comparative critical review with relevant ag ricultural residue case studies", J. Anal. Appl. Pyrolysis, Vol. 91, No. 1, 2011, pp. 1-33, doi: https://doi.org/10.1016/j.jaap.2011.01.004.
M. J. Wornat, R. H. Hurt, K. A. Davis, and N. Y. C. Yang, "Single-particle combustion of two biomass chars", Symposium (International) on Combustion, Vol. 26, No. 2, 1996, pp. 3075-3083, doi: https://doi.org/10.1016/S0082-0784(96)80151-2.
J. K. Sun and R. H. Hurt, "Mechanisms of extinction and near-extinction in pulverized solid fuel combustion", Proc. Combust. Inst., Vol. 28, No. 2, 2000, pp. 2205-2213, doi: https://doi.org/10.1016/S0082-0784(00)80630-X.
R. Hurt, J. K. Sun, and M. Lunden, "A kinetic model of carbon burnout in pulverized coal combustion", Combust. Flame, Vol. 113, No. 1-2, 1998, pp. 181-197, doi: https://doi.org/10.1016/S0010-2180(97)00240-X.
Y. Niu and C. R. Shaddix, "A sophisticated model to predict ash inhibition during combustion of pulverized char particles", Proc. Combust. Inst., Vol. 35, No. 1, 2015, pp. 561-569, doi: https://doi.org/10.1016/j.proci.2014.05.077.
K. Y. Lisandy, G. M. Kim, J. H. Kim, G. B. Kim, and C. H. Jeon, "Enhanced accuracy of the reaction rate prediction model for carbonaceous solid fuel combustion", Energy Fuels, Vol. 31, No. 5, 2017, pp. 5135-5144, doi: https://doi.org/10.1021/acs.energyfuels.7b00159.
S. K. Bhatia and D. D. Perlmutter, "A random pore model for fluidsolid reactions: I. Isothermal, kinetic control", AIchE, Vol. 26, No. 3, 1980, pp. 379-386, doi: https://doi.org/10.1002/aic.690260308.
I. W. Smith, "The combustion rates of coal chars: a review", Symposium (International) on Combustion, Vol. 19, No. 1, 1982, pp. 1045-1065. Retrieved from https://che.utah.edu/-ring/ChE-6960/Combustion%20of%20COAL%20CHARS-%20A%20REVIEW.pdf.
M. M. Baum and P. J. Street, "Predicting the combustion behavior of coal particles", Combust. Sci. Technol., Vol. 3, No. 5, 1971, pp. 231-243, doi: https://doi.org/10.1080/00102207108952290.
M. A. Field, "Rate of combustion of size-graded fractions of char from a low-rank coal between $1\;200^{\circ}K\;and\;2\;000^{\circ}K$ ", Combust. Flame, Vol. 13, No. 3, 1969, pp. 237-252, doi: https://doi.org/10.1016/0010-2180(69)90002-9.
L. Ma, A. Guo, Q. Fang, T. Wang, C. Zhang, and G. Chen, "Combustion interactions of blended coals in an $O_2/CO_2$ mixture in a drop-tube furnace: experimental investigation and numerical simulation", Appl. Therm. Eng., Vol. 145, 2018, pp. 184-200, doi: https://doi.org/10.1016/j.applthermaleng.2018.09.033.
B. H. Lee, S. G. Kim, J. H. Song, Y. J. Chang, and C. H. Jeon, "Influence of coal blending methods on unburned carbon and NO emissions in a drop-tube furnace", Energy Fuels, Vol. 25, No. 11, 2011, pp. 5055-5062, doi: https://doi.org/10.1021/ef200783q.
ANSYS, "ANSYS FLUENT 12.0 Theory Guide", ANSYS Inc., Canonsburg, PA, 2009.
G. M. Kim, D. G. Lee, and C. H. Jeon, "Fundamental characteristics and kinetic analysis of lignocellulosic woody and herbaceous biomass fuels", Energies, Vol. 12, No. 6, 2019, pp. 1008, doi: https://doi.org/10.3390/en12061008.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.