최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.3, 2020년, pp.36 - 41
Mechanical systems installed in transport devices, such as vehicles, airplanes, and ships, are mostly subject to translational accelerations at the joints during operations. This base acceleration excitation has a large influence on the performance of the system, therefore, its response must be well...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반적인 구조물의 선형 동적 문제에 대한 유한 요소 방정식의 표현은? | 일반적인 구조물의 선형 동적 문제에 대한 유한 요소 방정식은 초기조건과 경계조건에서 질량행렬, 감쇠행렬, 강성행렬 및 하중벡터와 변위벡터의 시간에 대한 2차 미분방정식으로 표현되며 하중의 형태에 따라 조화응답해석, 충격해석, 진동해석 등으로 분류한다. 그런데, 동적 해석이 필요한 기계 시스템들 중 자동차 및 항공기에 탑재되어 운행되는 기계 장치들은 지진을 받는 구조물 [1,2] 과 마찬 가지로 병진운동에 해당하는 기초 가진(base excitation)으로 진동이 일어난다 [3-7] . | |
가속도 경계조건을 갖는 기계 구조물의 동적 해석은 수치해법으로 거대질량법이 많이 사용되는데, 이 방법은 무엇인가? | 가속도 경계조건을 갖는 기계 구조물의 동적 해석은 수치해법으로 거대질량법(large mass method) [8-10] 이 많이 사용된다. 이 방법은 가속도 가진이 일어나는 기초부를 임의의 거대 질량으로 대체하고 이 질량에 가속도를 부여하여 동적해를 구하는 방법이다. 그러므로 임의의 유한한 값으로 가정된 질량의 크기에 따라 동적 거동의 계산 결과에 오차가 있을 수 있다. |
Moon, B. Y., Kang, G. J., Kang, B. S. and Kim, K. S., “Dynamic Stability Analysis of Base-Isolated Low-level Nonlinear Structure ubder Earthquake Excitation,” Transactions of the Korean Society of Automotive Engineers, Vol. 25, No. 11, pp. 1743-1750, 2001.
Lee, S. E. and Lee, T. W., “Vibration Characteristic Analysis of Gimbal Structure System in Collection Equipment of Image Information,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 20-25, 2010.
Lee, S. E., Lee, T. W. and Kang, Y. G., “Shock Analysis of Gimbal Structure System Including Rubber Vibration Isolator in a Observation Reconnaissance Aircraft,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 73-80, 2014.
Lee, S. E., Park, H. G. and Lee, T. W., “A Study on the Shock Response of an Image Sensor Unit in an Electro-Optical Targeting System Mounted on a Military Vehecle,” TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, Vol. 42, No. 4, pp. 391-398, 2018.
Haberman, D., "Sine-sweep test simulation in ANSYS using the large-mass and direct-displacement methods," Collaborative Solutions, Inc., 2000.
Kim, Y. W., Kim H. N. and Jung, M. J., "Mathematical Analysis on Large Mass Method for the Dynamic Responses of a Two-d.o.f Spring-Mass System Excited by Ground Acceleration," Fall Conference of the KSME, pp. 933-938, 2010.
Kim, Y. W., "A study on large mass method for dynamic problem of multiple degree-of-freedom system excited by ground acceleration time history," Journal of Mechanical Science and Technology, Vol. 28. No. 1, pp. 25-41, 2014.
Bathe, K. J., Finite Element Procedures, Prentice Hall, London, pp. 763-837, 1996.
ANSYS, ANSYS Documentation for Revision 16.1, ANSYS Inc., 2015.
Sinapius, J. M., "Tuning of the Normal Modes by Multi Axial Base Excitation," Mechanical Systems and Signal Processing, Vol. 13, No. 6, pp.911-924, 1999.
MIL-STD-810G., "Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests, Method 516.6 Shock", 2008.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.