최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.3, 2020년, pp.63 - 70
황종대 (한국폴리텍대학 부산캠퍼스 기계시스템과) , 윤일우 (한국폴리텍대학 부산캠퍼스 기계시스템과)
Two rotational motions of the 5-axis machine tool maximize the degree of freedom of the tool axis vector, which improves tool accessibility; however, this lowers feed speed and rigidity, which impairs machining stability. In addition, cutting efficiency is lowered when compared with a flat end mill ...
Fontaine, M., Devillez, A., Moufki, A. and Dudzinski, D., "Modeling of cutting forces in ball-end milling with tool-surface inclination Part II. Influence of cutting conditions, run-out, ploughing and inclination angle", Journal of Materials Processing Technology, Vol. 189, No. 1-3, pp. 85-96, 2007.
Cho, H. D., Jung, D. I., Yoon, M. C., Choi, D. S., Shin, B. S., Lee, E. S. and Dong, Y. G, " The development of exclusive CAD/CAM system for impeller blades formed by ruled surface II (A study on the 5-axis machining)", Transactions of the korean society of machine tool engineer, Vol. 11, No. 3, pp. 1-8, 2002.
Chen, S. L. and Wang, W. T., "Computer aided manufacturing technologies for centrifugal compressor impellers", Journal of Materials Processing Technology, Vol. 115, No. 3, pp. 284-293, 2001.
Bohez, E. L., Senadhera, S. R., Pole, K., Duflou, J. R., & Tar, T., "A Geometric Modeling and Five-Axis Machining Algorithm for Centrifugal Impellers", Journal of Manufacturing systems, Vol. 16, No. 6, pp. 422-436, 1997.
Lauwers, B., Dejonghe, P. and Kruth, J. P., "Optimal and collision free tool posture in five-axis machining through the tight integration of tool path generation and machine simulation", Computer-Aided Design, Vol. 35, No. 5, pp. 421-432, 2003.
Jang, D. K, Lim, K. N. and Yang, G. E., "A Study on Five-Axis Roughing of Impeller with Ruled Surface", Journal of the Korean Society for Precision Engineering Vol. 24, No. 7, pp. 60-68, 2007.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.