최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기品質經營學會誌 = Journal of Korean society for quality management, v.48 no.1, 2020년, pp.69 - 86
정지선 ((주)LG화학) , 박순서 ((주)LG화학) , 김지호 ((주)LG화학) , 권혁무 (부경대학교 시스템경영공학) , 홍성훈 (전북대학교 산업정보시스템공학과) , 이민구 (충남대학교 정보통계학과)
Purpose: This study aims to determine the optimal conditions for the spot welding process that mechanically connects the case of a cylindrical secondary battery and the negative tab. Methods: We use 33 factorial design to derive the optimal conditions for the spot welding process. The pulling streng...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전지는 어떻게 분류 되는가? | 전지는 일정 수명기간만 한 차례 사용이 가능한 일차전지(primary battery)와 재충전을 통해 장시간 반복 사용이 가능한 이차전지(secondary battery)로 나눌 수 있다. 리튬이온 이차전지는 다른 이차전지에 비해 작동 전압 및 에너지 밀도가 높을 뿐 아니라 오래 사용할 수 있는 특성이 있어 이차전지 시장에서 매우 중요한 위치를 차지하고 있다. | |
리튬이온 이차전지 개발할 때 고려해야하는 것과 사례는 어떤 것이 있는가? | 한국, 일본, 중국의 이차전지 제조업체 간의 경쟁이 심화하고 있는 상황에서 더욱 안전하고 성능이 좋은 제품을 생산하는 것은 생존의 기본적인 요건이 되었다. 전지의 성능을 높이는 것은 내재 에너지양을 증가시키는 것으로 그만큼 사고의 잠재 가능성도 커진다는 점을 고려해야 한다. 2016년 삼성 갤럭시 노트7의 발화 사고는 높은 에너지밀도를 가진 전지에 제조상의 결함이 발생했을 때의 위험성을 보여준다. 따라서 더 오래 쓸 수 있으면서도 안전한 이차전지를 개발하는 것은 전지 제조사의 필수 과제 이다. | |
리튬이온 이차전지의 특성은 무엇인가? | 전지는 일정 수명기간만 한 차례 사용이 가능한 일차전지(primary battery)와 재충전을 통해 장시간 반복 사용이 가능한 이차전지(secondary battery)로 나눌 수 있다. 리튬이온 이차전지는 다른 이차전지에 비해 작동 전압 및 에너지 밀도가 높을 뿐 아니라 오래 사용할 수 있는 특성이 있어 이차전지 시장에서 매우 중요한 위치를 차지하고 있다. 리튬이온 이차전지는 모바일 IT 기기, 전동공구, 전기차 등 적용제품이 다양해지고 수요가 증가함에 따라 성장세를 지속하고 있어 고객의 다양한 요구사항을 만족하기 위해 경쟁적으로 단위 부피당 에너지 밀도를 높이고 장기 수명을 보증하는 방향으로 발전되어 왔다. |
Byun, J. H., Jung, C. S., Kim, D. H., and Park, K. H., 2019. A Case Study of Enhancing Flame Retardancy of Mixture Material. Journal of Korean Society for Quality Management 47(3):631-639.
Chang, H. S. and Lee, J. Y. 2012. Monitoring of Resistance Spot Welding Processes. Journal of the Korean Welding and Joining Society 30(1):19-26.
Cho, S. M. 1997. Principle of Resistance Welding and Analysis of Monitoring Results. Journal of the Korean Welding and Joining Society 15(2):1-10.
Cho, S. W., and Cho, S. M. 2004. A Development of Q-MEXS for In-Line Quality Monitoring in Resistance Welding. International Welding/Joining Conference-Korea. pp. 24-26.
Cho. H. S. 2000. Welding Quality Supervision and Control in Resistance Welding Processes. Journal of the Korean Welding and Joining Society 18(4):11-19.
Hong, M, S., and Kim, J. M. 2003. A Study on the Evaluation of Weldability in Spot Welding. Proceedings of the International Conference of Manufacturing Technology Engineers. pp. 301-306.
Hwang, D. S., and Ko, M, H. 2012. Development and Application of Realtime Weld Quality Monitoring System. Journal of the Korean Welding and Joining Society 30(1):44-50.
Khaldoun K. T., and Ibrahim A. R. 2004. A Ddesign of Experiments Approach for Optimizing an Extrusion Blow Molding Process. Journal of Quality in Maintenance Engineering, Jordan 10(1):47-54.
Kim, G. C., Lee, M. Y., and Lim, T. J. 1996. Effect of Process Parameters of Heat Input Efficiency in Condenser Discharge Welding. Proceedings of the Korean Welding and Joining Society. pp. 3-5.
Ko, M. H., Kim, J. W., Ham, H. S., and Cho, S. M. 2005. The Comparison of Average Dynamic Resistance and Instantaneous Dynamic Resistance Pattern during Half-Cycle for the Heat Generation Phenomena in Resistance Welding. Proceedings of the Korean Welding and Joining Society 305-307.
Ko, M. H., Kim, S. Y., Son, J. Y., Lee, Y. B., and Cho, S. M. 2006. Comparison and Observation of Heating Phenomena by High Speed Camera and Waveform Monitoring in Spot Welding with Various Power Sources. Proceedings of the Korean Welding and Joining Society. pp. 80-82.
Lee, D. H., Lee, M. L., and Bae, S. J., 2016. "A Study on Optimal Operation Conditions for an Electronic Device Alignment System by Using Design of Experiments. Journal of Korean Society for Quality Management 43(3):453-465.
Lee, S. P., Kwon, H. M. Hong, S. H., and Lee, M. K. 2019. Optimization of the Extrusion Moulding Using Design of Experiments." Journal of the Korean Institute of Plant Engineering 24(2):13-21.
Lithium-ion battery. 2018 Nov 10. Wikipedia. Available from: https://en.wikipedia.org/wiki/Lithium-ion_battery.
Park, J. H., Cho, H. S., and Park, Y. J. 1999. The On-Line Quality Monitoring for Resistance Spot Welding Using the Pressure Pattern. Proceedings of the Korean Society for Precision Engineering. pp. 461-464.
Recall of the Samsung Galaxy Note 7. last modified 2018 Sep 13. accessed 2018 Oct 10. Wikipedia, Available from: https://ko.wikipedia.org/wiki/%EC%82%BC%EC%84%B1_%EA%B0%A4%EB%9F%AD%EC%8B%9C_%EB%85%B8%ED%8A%B8_7_%EB%A6%AC%EC%BD%9C_%EC%82%AC%ED%83%9C#%EA%B2%B0%ED%95%A8%EC%9D%98_%EC%9B%90%EC%9D%B8.
What is a Secondary Battery. POSCO Chemical. accessed 2018 Nov 10. Available from: http://www.poscochemical.com/kr/sub.do?MENU_SEQ10307&PAGE_SEQ10441&LANGko_KR.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.