Issa, Shams A.M.
(Physics Department, Faculty of Science, University of Tabuk)
,
Ali, Atif Mossad
(Physics Department, Faculty of Science, King Khalid University)
,
Tekin, H.O.
(Uskudar University, Vocational School of Health Services, Radiotherapy Department)
,
Saddeek, Y.B.
(Physics Department, Faculty of Science, Al-Azhar University)
,
Al-Hajry, Ali
(Physics Department, Faculty of Science, King Khalid University)
,
Algarni, Hamed
(Physics Department, Faculty of Science, King Khalid University)
,
Susoy, G.
(Istanbul University, Faculty of Science, Department of Physics)
In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La2O3 additive were synthesi...
In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La2O3 additive were synthesized using the technique of melt quenching. According to the results, the increase of the La2O3 additive increases the density of the glass samples and the mass attenuation coefficient (μm) values, whereas the half-value layer (HVL) and mean free path (MFP) values decrease. The effective atomic number (Zeff) is also enhanced with an increment of both mass removal cross section for neutron (ΣR) and absorption neutron scattering cross section (σabs). In addition to the other parameters, rigidity parameter values were theoretically examined. The increase of La2O3 causes some other important magnitudes to increase. These are the average crosslink density, the number of bonds per unit volume, as well as the stretching force constant values of these glass samples. These results are in concordance with the increase of elastic moduli in terms of the Makishima-Mackenzie model. This model showed an increase in the rigidity of the glass samples as a function of La2O3.
In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La2O3 additive were synthesized using the technique of melt quenching. According to the results, the increase of the La2O3 additive increases the density of the glass samples and the mass attenuation coefficient (μm) values, whereas the half-value layer (HVL) and mean free path (MFP) values decrease. The effective atomic number (Zeff) is also enhanced with an increment of both mass removal cross section for neutron (ΣR) and absorption neutron scattering cross section (σabs). In addition to the other parameters, rigidity parameter values were theoretically examined. The increase of La2O3 causes some other important magnitudes to increase. These are the average crosslink density, the number of bonds per unit volume, as well as the stretching force constant values of these glass samples. These results are in concordance with the increase of elastic moduli in terms of the Makishima-Mackenzie model. This model showed an increase in the rigidity of the glass samples as a function of La2O3.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
However, the extensive literature review has shown that there are only a few studies on the impact of radiation shielding properties on Yttria doped boro-bismuthate glass samples. Therefore, this work has aimed to investigate the nuclear radiation shielding properties of different types of Pb-free Ytriya doped boro-bismuthate glass samples. It is also aimed to investigate the mechanical properties and evaluate their mechanical properties as a suitable shielding material.
Therefore, this work has aimed to investigate the nuclear radiation shielding properties of different types of Pb-free Ytriya doped boro-bismuthate glass samples. It is also aimed to investigate the mechanical properties and evaluate their mechanical properties as a suitable shielding material. Boro-bismuthate was chosen as the basic glass sample in this study because of its unique properties such as excellent shielding properties and high transparency.
Furthermore, the obtained results can provide a wide range evaluation opportunity on the nature of Ytriya doped boro-bismuthate glass in recent amorphous structure. The findings of this study can be useful for a better understanding of the suitability of Ytriya doped boro-bismuthate glass samples as a nuclear shielding material.
This paper investigates the radiation shielding and mechanical features of Y(0.1-x)B0.6Bi1.8O3La2x glasses. The \(\mu\)m values are calculated using XCOM program.
3 and 4 the LYBB6 glass sample has the lowest HVL value and MFP value, respectively. This study shows that the LYBB6 glass sample exhibits better photon and neutron radiation shielding capabilities than other glass samples. The increase in the La2O3 addition increases the bridging oxygen atoms and consequently increases the cross-link density and the number of coordination.
제안 방법
In this study, different types of glass samples were prepared using the traditional melt quenching technique, with the chemical formula Y(0.1-x)B0.6Bi1.8O3La2x where x = 0 to 0.01. Different chemicals such as La2O3, boric acid, Yttria as well as bismuth oxide were blended and manually grinding with an agate mortar to form the combinations shown in Table 1.
1 cm was cleaned for thickness just as for estimating radiation protecting and mechanical properties. Then again, the bits of glass tests were squashed and comminuted and arranged for X-beam diffractometer estimations.
is the partial density [21,22]. Finally, a KARL DEUTSCH system consisting of X and Y cut transducers and Echograph was used for the stability of the polished glasses so that the measurement of ultrasonic speeds was controlled.
이론/모형
This shows the formation of more bridging oxygen. Using density data, elastic modules and packaging density can be determined using the following equations according to the Makishima-Mackenzie model [40].
성능/효과
It is also aimed to investigate the mechanical properties and evaluate their mechanical properties as a suitable shielding material. Boro-bismuthate was chosen as the basic glass sample in this study because of its unique properties such as excellent shielding properties and high transparency. It is to be noted that outcomes from the present investigation would be useful for glass literature and in particular for their radiation shielding applications.
후속연구
Boro-bismuthate was chosen as the basic glass sample in this study because of its unique properties such as excellent shielding properties and high transparency. It is to be noted that outcomes from the present investigation would be useful for glass literature and in particular for their radiation shielding applications. Furthermore, the obtained results can provide a wide range evaluation opportunity on the nature of Ytriya doped boro-bismuthate glass in recent amorphous structure.
참고문헌 (48)
H.O. Tekin, MCNP-X Monte Carlo code application for mass attenuation co-efficients of concrete at different energies by modeling $3{\times}3$ inch NaI(Tl) detector and comparison with XCOM and Monte Carlo data, Sci. Technol. Nucl. Install. (2016), https://doi.org/10.1155/2016/6547318. Article ID 6547318, 7 pages.
H.O. Tekin, V.P. Singh, T. Manici, Effects of micro-sized and nano-sized WO3 on mass attenuation coefficients of concrete by using MCNPX code, Appl. Radiat. Isot. 121 (2017) 122-125, https://doi.org/10.1016/j.apradiso.2016.12.040.
H.O. Tekin, T. Manici, Simulations of mass attenuation coefficients for shielding materials using the MCNP-X code. Nuclear Science and Techniques, Nucl. Sci. Tech. 28 (2017) 95, https://doi.org/10.1007/s41365-017-0253-4.
F. Akman, M.I. Sayyed, M.R. Kacal, H.O. Tekin, Investigation of photon shielding performances of some selected alloys by experimental data, theoretical and MCNPX code in the energy range of 81 keV-1333 keV, J. Alloy. Comp. 772 (2019) 516-524, https://doi.org/10.1016/j.jallcom.2018.09.177, 25 January.
Y.B. Saddeek, K. Aly, G. Abbady, N. Afify, K.S. Shaaban, A. Dahshan, Optical and structural evaluation of bismuth alumina-borate glasses doped with different amounts of (Y 2 O 3), J. Non-Cryst. Solids 454 (2016) 13-18, https://doi.org/10.1016/j.jnoncrysol.2016.10.023.
M.K. Halimah, A. Azuraida, M. Ishak, L. Hasnimulyati, Influence of bismuth oxide on gamma radiation shielding properties of boro-tellurite glass, J. Non-Cryst. Solids 512 (2019) 140-147, https://doi.org/10.1016/j.jnoncrysol.2019.03.004.
H.O. Tekin, Shams A.M. Issa, E. Kavaz, E.E. Altunsoy Guclu, The direct effect of Er2O3 on bismuth barium telluro borate glasses for nuclear security applications, Mater. Res. Express 6 (2019) 115212, https://doi.org/10.1088/2053-1591/ab4cb5.
M.G. Dong, O. Agar, H.O. Tekin, O. Kilicoglu, Kawa M. Kaky, M.I. Sayyed, A Comparative study on gamma photon shielding features of various germanate glass systems, Compos. B Eng. 165 (2019) 636-647, https://doi.org/10.1016/j.compositesb.2019.02.022.
S. Singh, G. Kalia, K. Singh, Effect of intermediate oxide (Y2O3) on thermal, structural and optical properties of lithium borosilicate glasses, J. Mol. Struct. 1086 (2015) 239-245, https://doi.org/10.1016/j.molstruc.2015.01.031.
G. Kaur, M. Kumar, A. Arora, O.P. Pandey, K. Singh, Influence of Y2O3 on structural and optical properties of SiO2-BaO-ZnO-xB2O3-(10-x) Y2O3 glasses and glass ceramics, J. Non-Cryst. Solids 357 (2011) 858-863, https://doi.org/10.1016/j.jnoncrysol.2010.11.103.
H. Deters, A.S.S. de Camargo, C.N. Santos, C.R. Ferrari, A.C. Hernandes, A. Ibanez, M.T. Rinke, H. Eckert, Structural characterization of rare-earth doped yttrium aluminoborate laser glasses using solid state NMR, J. Phys. Chem. C 113 (2009) 16216-16225, https://doi.org/10.1021/jp9032904.
M.A. Hughes, T. Suzuki, Y. Ohishi, Spectroscopy of bismuth-doped lead-aluminum-germanate glass and yttrium-aluminum-silicate glass, J. Non-Cryst. Solids 356 (2010) 2302-2309, https://doi.org/10.1016/j.jnoncrysol.2010.03.043.
S. Karki, C.R. Kesavulu, H.J. Kim, J. Kaewkhao, N. Chanthima, Y. Ruangtaweep, Physical, optical and luminescence properties of B2O3-SiO2-Y2O3-CaO glasses with Sm3+ions for visible laser applications, J. Lumin. 197 (2018) 76-82, https://doi.org/10.1016/j.jlumin.2018.01.015.
F. Lofaj, R. Satet, M.J. Hoffmann, A.R. de Arellano Lopez, Thermal expansion and glass transition temperature of the rare-earth doped oxynitride glasses, J. Eur. Ceram. Soc. 24 (2004) 3377-3385, https://doi.org/10.1016/j.jeurceramsoc.2003.10.012.
Y. Hao, Y. Dai, Influence of Y 2 O 3 on the structure and luminescence of Eu 2+ doped borosilicate glasses, J. Non-Cryst. Solids 474 (2017) 32-36, https://doi.org/10.1016/j.jnoncrysol.2017.08.023.
Shamsan S. Obaid, Dhammajot K. Gaikwad, Pravina P. Pawar, Determination of gamma ray shielding parameters of rocks and concrete, Radiat. Phys. Chem. 144 (2018) 356-360, https://doi.org/10.1016/j.radphyschem.2017.09.022.
Shamsan S. Obaid, M.I. Sayyed, D.K. Gaikwad, H.O. Tekin, Y. Elmahrough, P.P. Pawar, Photon attenuation coefficients of different rock samples using MCNPX, Geant4 simulation codes and experimental results: a comparison study, Radiat. Eff. Defects Solids 173 (2018) 11-12, https://doi.org/10.1080/10420150.2018.1505890, 900-914.
S. Issa, M. Sayyed, M. Kurudirek, Investigation of gamma radiation shielding properties of some zinc tellurite glasses, J. Phys. Sci. 27 (2016) 97-119, https://doi.org/10.21315/jps2016.27.3.7.
P. Limkitjaroenporn, J. Kaewkhao, P. Limsuwan, W. Chewpraditkul, Physical, optical, structural and gamma-ray shielding properties of lead sodium borate glasses, J. Phys. Chem. Solids 72 (2011) 245-251, https://doi.org/10.1016/j.jpcs.2011.01.007.
M.F. Kaplan, Concrete Radiation Shielding, John Wiley & Sons, Inc, New York, 1989.
V.V. Awasarmol, D.K. Gaikwad, Shamsan S. Obaid, P.P. Pawar, Gamma radiation studies on organic nonlinear optical materials in the energy range 122-1330 keV, Proc. Natl. Acad. Sci. India Sect. A: Phys. Sci. (2019) 1-6, https://doi.org/10.1007/s40010-019-00636-1.
H.C. Manjunatha, L. Seenappa, C. B.M, K.N. Sridhar, C. Hanumantharayappa, Gamma, X-ray and neutron shielding parameters for the Al-based glassy alloys, Appl. Radiat. Isot. 139 (2018) 187-194, https://doi.org/10.1016/j.apradiso.2018.05.014.
L. Gerward, N. Guilbert, K.B. Jensen, H. Levring, WinXCom - a program for calculating X-ray attenuation coefficients, Radiat. Phys. Chem. 71 (2004) 653-654, https://doi.org/10.1016/j.radphyschem.2004.04.040.
R. Bagheri, A.K. Moghaddam, S.P. Shirmardi, B. Azadbakht, M. Salehi, Determination of gamma-ray shielding properties for silicate glasses containing Bi2O3, PbO, and BaO, J. Non-Cryst. Solids 479 (2018) 62-71, https://doi.org/10.1016/j.jnoncrysol.2017.10.006.
M.I. Sayyed, S.A.M. Issa, M. Buyikyildiz, M. Dong, Determination of nuclear radiation shielding properties of some tellurite glasses using MCNP5 code, Radiat. Phys. Chem. 150 (2018) 1-8, https://doi.org/10.1016/j.radphyschem.2018.04.014.
S.A.M. Issa, A.A.A. Darwish, M.M. El-Nahass, The evolution of gamma-rays sensing properties of pure and doped phthalocyanine, Prog. Nucl. Energy 100 (2017) 276-282, https://doi.org/10.1016/j.pnucene.2017.06.016.
R. Bagheri, A. Khorrami Moghaddam, H. Yousefnia, Gamma ray shielding study of barium-bismuth-borosilicate glasses as transparent shielding materials using MCNP-4C code, XCOM program, and available experimental data, Nucl. Eng. Technol. 49 (2017) 216-223, https://doi.org/10.1016/j.net.2016.08.013.
H.O. Tekin, O. Kilicoglu, E. Kavaz, E.E. Altunsoy, M. Almatari, O. Agar, M.I. Sayyed, The investigation of gamma-ray and neutron shielding parameters of Na2O-CaO-P2O5-SiO2 bioactive glasses using MCNPX code, Results in Physics 12 (2019) 1797-1804, https://doi.org/10.1016/j.rinp.2019.02.017.
M. Celikbilek Ersundu, A.E. Ersundu, M.I. Sayyed, G. Lakshminarayana, S. Aydin, Evaluation of physical, structural properties and shielding parameters for K 2 O-WO 3 -TeO 2 glasses for gamma ray shielding applications, J. Alloy. Comp. 714 (2017) 278-286, https://doi.org/10.1016/j.jallcom.2017.04.223.
A. Saeed, Y.H. Elbashar, R.M. El shazly, Optical properties of high density barium borate glass for gamma ray shielding applications, Opt. Quant. Electron. 48 (2016) 1, https://doi.org/10.1007/s11082-015-0274-3.
S.A.M. Issa, Y.B. Saddeek, M.I. Sayyed, H.O. Tekin, O. Kilicoglu, Radiation shielding features using MCNPX code and mechanical properties of the PbO Na2O B2O3CaO Al2O3SiO2 glass systems, Compos. B Eng. 167 (2019) 231-240, https://doi.org/10.1016/j.compositesb.2018.12.029.
V. Dimitrov, T. Komatsu, An interpretation of optical properties of oxides and oxide glasses in terms of the electronic ion polarizability and average single bond strength, J. Univ. Chem. Technol. Met. 45 (2010) 219-250.
B. Bridge, N.D. Patel, D.N. Waters, On the elastic constants and structure of the pure inorganic oxide glasses, Phys. Status Solidi 77 (1983) 655-668, https://doi.org/10.1002/pssa.2210770231.
A. Makishima, J.D. Mackenzie, Direct calculation of Young's moidulus of glass, J. Non-Cryst. Solids 12 (1973) 35-45, https://doi.org/10.1016/0022-3093(73)90053-7.
A. Alatawi, A.M. Alsharari, S.A.M. Issa, M. Rashad, A.A.A. Darwish, Y.B. Saddeek, H.O. Tekin, Improvement of mechanical properties and radiation shielding performance of Al-Bi-BO3 glasses using yttria: an experimental investigation, Ceram. Int. (2019), https://doi.org/10.1016/j.ceramint.2019.10.069. Available Online 9 October.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.