최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항공우주학회지 = Journal of the Korean Society for Aeronautical & Space Sciences, v.48 no.7, 2020년, pp.523 - 528
김학성 (The 4th Research and Development Institute, Agency for Defense Development) , 장승교 (The 4th Research and Development Institute, Agency for Defense Development)
A lateral type MEMS inertial switch was designed on the same principle as spring-mass system. The MEMS switch is used for arming mechanism of the arm-fire device by sensing the applied acceleration. We analyzed the switching capability of the MEMS switch under various acceleration conditions via per...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MEMS 관성 스위치의 구성 시스템은 무엇인가? | MEMS 관성 스위치는 일반적인 MEMS 가속도계의 원리를 응용하여 만든 스위치로서 외부에서 인가되는 가속도를 감지하여 기계적인 스위칭을 발생시키는 장치이다. 일반적인 스프링-메스 시스템으로 구성되어있고 일정 값 이상의 가속도가 인가되면 관성 질량의 운동에 의하여 스위치가 연결되고 가속도 값이 제거되면 스프링의 복원력에 의하여 스위치가 열려 본래 상태로 돌아가는 구조로 되어 있다. MEMS 관성 스위치는 스위칭을 인식하기 위하여 스위치 양단에 간단한 회로가 연결되지만 대부분 초소형 기계 구조물로 이루어져 있기 때문에 MEMS 가속도계 보다는 전자파에 덜 민감하다. | |
MEMS 관성 스위치는 무엇인가? | MEMS 관성 스위치는 일반적인 MEMS 가속도계의 원리를 응용하여 만든 스위치로서 외부에서 인가되는 가속도를 감지하여 기계적인 스위칭을 발생시키는 장치이다. 일반적인 스프링-메스 시스템으로 구성되어있고 일정 값 이상의 가속도가 인가되면 관성 질량의 운동에 의하여 스위치가 연결되고 가속도 값이 제거되면 스프링의 복원력에 의하여 스위치가 열려 본래 상태로 돌아가는 구조로 되어 있다. | |
MEMS 스위치는 시뮬레이션 결과 어떤 가속도의 기울기에서 작동했는가? | 성능 모델링을 통하여 다양한 가속도 조건에서의 구동 양상을 분석하였다. 시뮬레이션 결과 가속도의 기울기가 10g/msec 이하인 경우에 MEMS 스위치는 10g에서 잘 작동하는 것으로 나타났다. 반면에, 설계 변수들의 공차를 10%로 고려한 시뮬레이션 결과 스프링 폭과 길이에 의해 임계 동작 가속도가 규격(10±2g)을 벗어났다. |
Matsunaga, T. and Esashi, M., "Acceleration Switch with Extended Holding Time using Squeeze Film Effect for Side Airbag Systems," Sensors and Actuators A: Physical, Vol. 100, Issue 1, August 2002, pp. 10-17.
Currano, L. J., Yu, M. and Balanchandran, B., "Latching in a MEMS Shock Sensor: Modeling and Experiments," Sensors and Actuators A: Physical, Vol. 159, Issue 1, April 2010, pp. 41-50.
Greywall, D. S., "MEMS-Based Inertial Switch," U.S. Patent, 7,218,193, 15 May 2007.
Gerson, Y., Schreiber, D., Grau, H. and Krylov, S., "Meso Scale MEMS Inertial Switch Fabricated using an Eletroplated Metal-on-Insulator Process," Journal of Micromechanics and Microengineering, Vol. 24, No. 2, January 2014, pp. 405-412.
Xu, Q., Sun, B., Li, Y., Xiang X., Lai, L., Li, J., Ding, G., Zhao, X. and Yang, Z., "Design and Characterization of an Inertial Microswitch with Synchronous follow-up Flexible Compliant Electrodes capable of Extending Contact Duration," Sensors and Actuators A: Physical, Vol. 270, February 2018, pp. 34-45.
Jang, S. G., Hwang, J. and Park, C., "MEMS Switch Assembly for Safety and Arming Device in Rocket," R.O.K. Patent, KR101772087B1, 2017.
Hwang, J., Ryu, D., Park, C., Jang S. G., Lee, C. I. and Kim, Y. K., "Design and Fabrication of a Silicon-based MEMS Acceleration Switch Working lower than 10g," Journal of Micromechanics and Microengineering, Vol. 27, No. 6, May 2017, 065009 (9pages).
Kansal, P., Kasturi, P., Kim, N. H. and Jang, S. G., "Sensitivity-Based Reliability Analysis of MEMS Acceleration Switch," Modern Applied Science, Vol. 11, No. 10, September 2017, pp. 123-136.
Mol, L., Rocha, L. A., Cretu, E. and Wolffenbuttel, R. F., "Squeezed Film Damping Measurements on a Parallel-Plate MEMS in the Free Molecule Regime," Journal of Micromechanics and Microengineering, Vol. 19, No. 7, June 2009, 074021(6pp).
Wai-Chi, W., Azid, A. A. and Majlis, B. Y., "Formulation of Stiffness Constants and Effective Mass for a Floded Beam," Archives of Mechanics, Vol. 62, No. 5, 2010, pp. 405-418.
Luo, J. K., et al., "Uniformity Control of Ni Thin-Film Microstructures deposited by Through- Mask Plating," Journal of the Electrochemical Society, Vol. 152, No. 1, 2005, pp. C36-C41.
Lee, H. N., Jang, S. G., Lee, S., Lee, J. S. and Hawang, Y. S., "MEMS Inertial Switch for Military Applications," Proceedings of eurosensors 2017 Conference, 1, 343, 2017, pp. 1-5.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.